• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.673-678
• /
• 2014

In a compressor, highly impulsive pressure fluctuations induced by a reciprocating piston and valves cause noise and vibration to be so critical issues that low noise requirement always challenges engineers developing it. A muffler is frequently used for reducing these impulsive noise components, but has adverse effects on compressor's performance due to additional pressure drop and heat transfer of refrigerant when it pass through the muffler. In this study, compressible full 3-dimensional CFD simulations are performed to investigate both of flow and acoustic performances of a muffler in use for compressors. On a basis of the analysis results, a parametric study using design factors introduced to improve flow and acoustic performances of the existing muffler is carried out. Finally, improved designs are suggested to confirm the current results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1313-1316
• /
• 2006

Demands of high volume dry vacuum pumps on the domestic semiconductor and LCD industries are rapidly increasing as the size of wafers and LCD is increasing. This study introduces a new experimental setup for testing the reliability of vacuum pumps. The test system was designed to measure the acoustic pressure and mechanical vibration levels simultaneously. It is shown that the test system enables the analysis and evaluation of the performance of dry pumps under the different gas-load conditions. Detailed experimental result are shown to enable us to examine the characteristics and performance of dry pumps.

• International Journal of Human Ecology
• /
• v.12 no.2
• /
• pp.109-117
• /
• 2011

This study examines the infant crying acoustic characteristics likely to arouse negative emotions and distress in mothers. We used samples of infant crying from three situations (hunger, pain, and the mother's absence) in six healthy infants over six months. We played the recordings of infants crying to 90 mothers in the care of infants and had them self-evaluate emotions and feelings. In addition, the sounds were analyzed acoustically through a CSL4400 to analyze frequency, energy, total expiratory time, and the number of the expirations. In this study, cries due to pain and the absence of the mother caused more unpleasant emotions and irritation in comparison to the infant sounds of hunger. In particular, crying from the absence of the mother caused the most distress. An analysis of these sounds showed that crying in the situations of pain and the absence of the mother were strong in frequency, high energy, and prolonged. These results suggest a relation between infant crying acoustical characteristics and the feelings of distress by the mother.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.964-969
• /
• 2008

The recently those of various gatherings or events are gradually increasing not only at the general public performance hall but also at the outdoor performance hall. However, since the most of the domestic outdoor performance halls are being designed and executed without the proper consideration and care for Acoustic Characteristic thereat, a satisfying acoustic management are not established due to above reason. From this point of view, this study presents the basic data that will increase the sound performance in designing of the outdoor performance hall, by conducting the comparative analysis on the architectural sound characteristics through the field survey on to the 3 outdoor performance halls that have different characteristics, in order to present the appropriate standards.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.1
• /
• pp.19-32
• /
• 1990

The perception of landscape structure can he formed mode clearly, with including an auditory stimulus to a visual aspect. The waterfall, as an landscape element, will be considered of not only it's function and structure in landscape architecture designing but also harmony with environment which it has been situated, and contribution to the public goad. The purpose of this study was to establish more 7rational and practical design theory for the construction of waterfall. The number of subjects investigated were 47 of waterfall located in Mt. Palgong. In this study, the acoustic character of the waterfalls were investigated as an excellent effect to mask easily sensible noises. The correlations between the structure of waterfalls and water 1a17ing sound, which were useful for waterfall design and construction, were examined. It was discovered that the position of double distance of waterfall height From the waterfall is significant in the visual and acoustic perception of waterfall.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.139-142
• /
• 2004

As fiber reinforced composite materials are widely used in aircraft, space structures and robot arms, the study on the non-destructive testing methods of the composite materials has become an important research area for improving their reliability and safety. In this paper, the AE signal analyzer with the resonance circuit to extract the specified frequency of the acoustic emission signal were designed and fabricated. The noise levels of the fabricated AE signal analyzer by the disturbance such as impact or mechanical vibration had a very small value comparable to those of the conventional AE signal analyzer. Also, the crack detection capabilities of the fabricated AE signal analyzer under the static and dynamic tensile test were evaluated and compared with the conventional AE signal analyzer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.75-81
• /
• 2012

Dissimilar material friction welding such as STD11 and SCM440, we are considering of such things as strength and tenacity of welding interface, which consist of friction welding rotation frequency, friction heating pressure, upset forging-pressure, friction heating time, and upset forging-pressure time. From the study, obtaining the interrelationship between welding condition and quality(toughness, tenacity), we can set the best range of welding condition. while performing acoustic emission examination for the nondestructive evaluation, we can deduce the interrelationship among total acoustic emission counts, friction welding variable, and quality during friction welding, which can solve the manufacturing difficulty and enhance the economic value.

• Speech Sciences
• /
• v.13 no.3
• /
• pp.97-105
• /
• 2006

The objective of this study was to analyze the acoustic patterns of Japanese /t/ produced by 40 Korean speakers in order to find an effective method of teaching it to Koreans. The experimental data consisted of 400 /t/ phonemes in word initial or non-initial positions of 10 words. Informants were in their twenties and raised in Daejeon and the surrounding area. Results showed that there were distinctive trends in duration and intensity of the major and non-major groups productions. Both groups pronounced the phoneme longer than the native speakers with more open mouths but with less loudness. The formant analysis showed that F1 values of the Japanese /t/ pronounced by Japanese major group were lower than those of the non-major. Its F2 values by the major group were higher than those of the non-major, which would suggest that the Koreans produced the tongue blade in more frontal position than the native speakers.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.697-703
• /
• 2003

For a single stage two cylinder rotary compressor, an analytical study has been made on the discharge gas pulsation. Discharge system of the twin rotary compressor consists of lower and upper mufflers and connecting passage holes between them, and cavities on both sides of the motor and passages between them. Acoustic modeling for the discharge system by transfer matrix method gives acoustic impedances at discharge valves so that gas pulsation at the valve sections can be obtained from discharge mass velocity. Since the mass velocity and the pressure pulsation at the valves are affected by each other, iteration should be made for convergence. Gas pulsations at other sections can also be calculated by using transfer matrix.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.