• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.60-65
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using activated carbon fiber(ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at lower potential, ACF felt was chemically modified in acidic, basic and neutral solution. Pore structure and functional groups of chemically modified ACF were examined, and the effect of treatment conditions was studied for the adsorption of U(VI). Specific surface area of all ACFs decreases by this treatment. The amount of acidic functional groups decreases with basic and neutral salt treatment, while the amount increases a lot with acidic treatment. The electrosorption capacity of U(VI) decreases on using the acid treated electrode due to the shielding effect of acidic functional groups. Base treated electrode enhances the capacity due to the reduction of acidic functional groups. The electrosorption amount of U(VI) on the base treated electrode at -0.3 V corresponds to that of ACF electrode at -0.9 V. Such a good adsorption capacity was not only due to the reduction of shielding effect but also the increase of $OH^-$ in the electric double layer on ACF surface by the application of negative potential.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.521-529
• /
• 2016

In this study, titanium nanotubes, prepared by anodization method, showing high surface and strong chemical stability in acidic and basic media, have been employed for the application to the electrodes for water splitting in KOH solution. Due to its high polarization resistance of $TiO_2$ itself, proper catalysts are essentially required to reduce overpotentials for water oxidation and reduction. Most of academic literature showed noble metal catalysts for foreign dopants in $TiO_2$ electrodes. From commercialization point of view, screening of low-cost catalyst is important. Herein, we propose molybdenum oxide as low-cost catalysts among various catalysts tested in the experiments, which exhibits the highest performance for hydrogen evolution reaction in highly alkaline solution. We showed that molybdenum oxide doped electrode can be operated in extreme acidic and basic conditions as well.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.519-523
• /
• 2009

$^{129}I$ is especially one of the most harmful radioactive elements because of its long half-life ($t_{1/2}$=$1.7{\times}10^7$ yr). The efficient removal of iodide ($I^-$) and iodate (${IO_3}^-$) in a aqueous solution by adsorption using activated alumina and activated carbon was studied. The removal efficiency was over 99% for iodide ion with silver treated basic alumina and iodate ion with acidic alumina or silver treated acidic alumina without any chemical addition or physical treatments.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1539-1544
• /
• 2008

A polymeric micelle, based on the poly(benzyl-L-histidine)-b-poly(ethylene glycol) (polyBz-His-b-PEG) diblock copolymer, was designed as a tumor-specific targeting carrier. The micelles (particle size: 67-80 nm, critical micelle concentration (CMC); 2-3 $\mu$g/mL) were formed from the diafilteration method at pH 7.4, as a result of self-assembly of the polyBz-His block at the core and PEG block on the shell. Removing benzyl (Bz) group from polyBz-His block provided pH-sensitivity of the micellar core; the micelles were physically destabilized in the pH range of pH 7.4-5.5, depending on the content of the His group free from Bz group. The ionization of His group at a slightly acidic pH promoted the deformation of the interior core. These pHdependent physical changes of the micelles provide the mechanism for pH-triggering anticancer drug (e.g., doxorubicin: DOX) release from the micelle in response to the tumor’s extracellular pH range (pH 7.2-6.5).

• Carbon letters
• /
• v.7 no.2
• /
• pp.97-104
• /
• 2006

The influence of carbon surface area, carbon-oxygen groups associated with the carbon surface and the solution pH on the adsorption of Pb(II) ions from aqueous solutions has been studied using three activated carbons. The adsorption isotherms are Type I of BET classification and the data obeys Langmuir adsorption equation. The BET surface area has little effect on the adsorption while it is strongly influenced by the presence of acidic carbon oxygen surface groups. The amount of these surface groups was enhanced by oxidation of the carbons with different oxidizing agents and reduced by eliminating these groups on degassing at different temperatures. The adsorption of Pb(II) ions increases on each oxidation and decreases on degassing the oxidized carbons. The increase in adsorption on oxidation has been attributed to the formation of acidic carbon-oxygen surface groups and the decrease to the elimination of these acidic surface groups on degassing. The adsorption is also influenced by the pH of the aqueous solution. The adsorption is only small at pH values lower than 3 but is considerably larger at higher pH values. Suitable mechanisms consistent with the adsorption data have been suggested.

• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.40-47
• /
• 2009

This study evaluates changes in the chemical composition and bioactivities of American ginseng (Panax quinquefolius L.) processed by boiling in water, $75^{\circ}C$ for 10, 20, 30, and 40 min, and autoclaving at high temperatures, $115^{\circ}C$ for 30 and 60 min and $130^{\circ}C$ for 90 and 120 min. Total ginsenoside contents of boiled ginseng remained relatively unchanged, whereas the contents of autoclaved ginseng samples significantly decreased with an increase of both time and temperature. Compared to unheated ginseng (control), the color of both boiled and autoclaved ginseng decreased in lightness and increased in redness. The acidic polysaccharide contents, the total phenolic contents and the antioxidant capacity of boiled and autoclaved ginseng were higher than the untreated ginseng, with the highest values being exhibited by the autoclaved samples. In particular, the antioxidant capacity of unheated ginseng increased about 2.5 times ($285.7{\pm}14.03\;mg$/100g to $777.2{\pm}26.4\;mg$/100g) when ginseng was autoclaved at $130^{\circ}C$ for 120 min as compared to the control. It was concluded that as American ginseng was processed at a high temperature, especially steam-heated in an autoclave, its chemical constituents changed and, in particular, acidic polysaccharides, total phenolics and antioxidant capacity were considerably increased.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.146-150
• /
• 2010

A distinguished class of hydrophobic ionic liquids bearing a Br${\o}$nsted acidic character derived from amide-like compounds were prepared by a neutralization reaction of N,N-diethylformamide, N,N-dibutylformamide, 1-formylpiperidine, and $\varepsilon$-caprolactam with trifluoroacetic acid and physical absorptions of $CO_2$ in these ionic liquids were demonstrated and evaluated. $CO_2$ solubilities in these ionic liquids were influenced by the molecular structure of the cation and were apparently increased with the molar volume. Comparison based on a volume unit reveals that $CO_2$ solubilities in these liquids are relatively higher than those in imidazolium-based ionic liquids. Henry's coefficients calculated from low-pressure solubility tests at 313 to 333 K were used to derive the thermodynamics quantities. Enthalpy and entropy of solvation may share equal contributions in solubility.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.149-155
• /
• 2013

Heterologous expression of a putative $K^+/H^+$ antiporter of Streptomyces coelicolor A3(2) (designated as sha4) in E. coli and Streptomyces hygroscopicus JCM4427 showed enhanced tolerance to $K^+$ stress, acidic-pH shock, and/or geldanamycin production under $K^+$ stress. In a series of $K^+$ extrusion experiments with sha4-carrying E. coli deficient in the $K^+/H^+$ antiporter, a restoration of impaired $K^+$ extrusion activity was observed. Based on this, it was concluded that sha4 was a true $K^+/H^+$ antiporter. In different sets of experiments, the sha4-carrying E. coli showed significantly improved tolerances to $K^+$ stresses and acidic-pH shock, whereas sha4-carrying S. hygroscopicus showed an improvement in $K^+$ stress tolerance only. The sha4-carrying S. hygroscopicus showed much higher geldanamycin productivity than the control under $K^+$ stress condition. In another set of experiments with a production medium, the secretion of geldanamycin was also significantly enhanced by the expression of sha4.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1324-1328
• /
• 2003

The simultaneous determination of anions ($SO_4 ^{2-},\;Cl^-,\;and\;NO_3^-$) and cations ($Na^+,\;NH^{4+},\;K^+,\;Mg^{2+},\;and\;Ca^{2+}$) in natural water obtained by Nakdong River waters system in Korea were performed by ion-exclusion/cationexchange chromatography with conductimetric detection. The stationary phase was a polymethacrylate-based weakly acidic cation-exchange resin column in the $H^+$-form and a weak-acid eluent. When using only a 1.4 mM sulfosalicylic acid/6 mM 18-crown-6 ether as an eluent, good resolution of both anions and cations, minimum time required for the separation, and satisfactory detection sensitivity were obtained in a reasonable time. The method was successfully applied to the simultaneous determination of anions and cations in natural waters.