• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.83-89
• /
• 2021

The extended Kalman filter (EKF) is widely used for global navigation satellite system (GNSS) applications. It is difficult to obtain precise positions with an EKF one-way (forward or backward) filter. In this paper, we propose an EKF smoother to improve the positioning accuracy by integrating forward and backward filters. For the EKF smoother experiment, we performed PPP using GNSS data received at the DAEJ reference station for a month. The effectiveness of the proposed approach is validated with multi-GNSS kinematic PPP experiments. The EKF smoother showed 35%, 6%, and 22% improvement in east, north, and up directions, respectively. In addition, accurate tropospheric zenith total delay (ZTD) values were calculated by a smoother. Therefore, the results from EKF smoother demonstrate that better accuracy of position can be achieved.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.205-206
• /
• 2023

This paper presents a new method for indoor localization track workers in construction sites. While GPS and NTRIP are effective for outdoor positioning, they are less accurate when used indoors. To address this issue, the proposed method utilizes Aruco markers to measure the distance between workers and the markers. By collecting data values, the location of each worker can be determined in real-time with high accuracy. This approach has the potential to enhance work efficiency and safety at construction sites, as it provides more precise indoor positioning compared to conventional methods, leading to improved work efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.242-246
• /
• 1996

Accurate measurements of burr profile and burr size are very important for the automation of deburring. In this paper, a new burr measurement system using capacitance sensor is proposed. Ultra precision milling machine was used as a sensor positioning system. The possibility and limitation of employing a capacitance sensor to defect burrs are also investigated. The proposed system is proven to be relatively accurate, easy to setup and lower cost. This system will be applicable to a fully automated deburring system with minor modifications.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.211-221
• /
• 2017

Ellipsodially referenced survey (ERS) is considered as one of the challenging issues in the hydrographic surveys due to the fact that the bathymetric data collected by this technique can be readily transformed either to the geodetic or the chart datum by application of some geoscientific models. Global Navigation Satellite Systems (GNSS) is a preferred technique to determine the ellipsoidal height of a vessel reference point (RP) because it provides cost-effective and unprecedentedly accurate positioning solutions. Especially, the GNSS-derived heights include heave and dynamic draft of a vessel, so as for the reduced bathymetric solutions to be potentially free from these corrections. Although over the last few decades, differential GNSS (DGNSS) has been widely adopted in the bathymetric surveys, it only provides limited accuracy of the vertical component. This technical barrier can be effectively overcome by adopting the so-called GNSS carrier phase (CPH) based techniques, enhancing accuracy of the height solution up to few centimeters. From the positioning algorithm standpoint, the CPH-based techniques are categorized under absolute and relative positioning in post-processing mode; the former is precise point positioning (PPP) correcting errors by the global or regional models, the latter is post-processed kinematic positioning (PPK) that uses the differencing technique to common error sources between two receivers. This study has focused on assessment of achievable accuracy of the ellipsoidal heights obtained from these CPH-based techniques with a view to their applications to hydrographic surveys where project area is, especially, few tens to hundreds kilometers away from the shore. Some field trials have been designed and performed so as to collect GNSS observables on static and kinematic mode. In this paper, details of these tests and processed results are presented and discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.155-164
• /
• 2013

Two design techniques for more accurate and more convenient hybrid positioning system with visible light communication (VLC) and ad-hoc wireless network infrastructure are proposed, in order to overcome the problems of high estimation error, high cost, and limited service range of the conventional positioning techniques. First method is based on a non-carrier VLC based hybrid positioning technique for applications involving of low data rate optical sensing and narrow-range visible light reception from transmitter, and long-range positioning. The second method uses a 4 MHz carrier VLC-based hybrid positioning technique for a high data rate optical sensing and wide-range visible light receiving from transmitter, and mid-range positioning applications. In indoor environments with obstacles where there are long-range 7731.4cm and mid-range 2368cm distances between an observer and a target respectively, the hybrid positioning developed with two design techniques are tested, and the proposed system is verified and analyzed in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.15-19
• /
• 2006

GPS has been increasingly exploited to provide positioning and navigation solutions for a variety of applications. In vessel berthing application, however, there are stringent requirements in terms of positioning accuracy, availability and integrity that cannot be satisfied by GPS alone. This is because the performance of satellite-based positioning and navigation systems are heavily dependent on both the number and the geometric distribution of satellite tracked by receivers. Due to the limited number of GPS satellites, a sufficient number of ‘visible’ satellites cannot be sometimes guaranteed. This paper discusses some issues associated with the implementation of ground-based pseudolite augmentation for vessel berthing. Pseudolite means small transmitter that transmits GPS-like signals in local area. Actually, pseudolite can play three different roles in GPS augmentation scheme, depending on the operational conditions. Firstly, in the case of kinematic GPS operation where there are no signal blockages, and more than five satellites are available, additional pseudolites strengthen the GPS satellite-pseudolite geometry, and more accurate and reliable positioning solution can be achieved. Secondly, in the case when there are adverse GPS operational environments in which the number of tracked satellites is less than four, pseudolites can complement the GPS signals. In the third case, GPS signals are completely unavailable, such as when operated indoor. In such cases the pseudolites can replace the satellite constellation. However, the first role will be considered in this paper, since more than four satellite signals can usually be tracked in most marine applications. This paper presents that the pseudolite-augmented precise positioning system can provides continuous centimeter-level positioning accuracy through comparison analysis of RDOP simulation result of the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.5
• /
• pp.1317-1340
• /
• 2024

With the rapid development of information technology, people's demands on precise indoor positioning are increasing. Wireless sensor network, as the most commonly used indoor positioning sensor, performs a vital part for precise indoor positioning. However, in indoor positioning, obstacles and other uncontrollable factors make the localization precision not very accurate. Ultra-wide band (UWB) can achieve high precision centimeter-level positioning capability. Inertial navigation system (INS), which is a totally independent system of guidance, has high positioning accuracy. The combination of UWB and INS can not only decrease the impact of non-line-of-sight (NLOS) on localization, but also solve the accumulated error problem of inertial navigation system. In the paper, a fused UWB and INS positioning method is presented. The UWB data is firstly clustered using the Fuzzy C-means (FCM). And the Z hypothesis testing is proposed to determine whether there is a NLOS distance on a link where a beacon node is located. If there is, then the beacon node is removed, and conversely used to localize the mobile node using Least Squares localization. When the number of remaining beacon nodes is less than three, a robust extended Kalman filter with M-estimation would be utilized for localizing mobile nodes. The UWB is merged with the INS data by using the extended Kalman filter to acquire the final location estimate. Simulation and experimental results indicate that the proposed method has superior localization precision in comparison with the current algorithms.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.260-265
• /
• 2003

Recently there are operating the Floating Vessel with the positioning control unit in ocean. This technology is not open to industrial society as exclusive one. In order to improve technical competition for its domestic product. It is required to develope the relevant product like above subject. This system consist of DGPS System, Unique Analysis, System Network, and Mooring System and so on. Accordingly Model/Field test were carried out to verify its Function / Performance for application of practical product. In this development, we have prepared the successful result to operate the speedy / accurate / stable unit as shown on this subject 'Development of Positioning Control System for Ship and Offshore using the DGPS'. And also it is expected to install this product for ship and offshore unit.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.373-381
• /
• 1999

Mobile Mapping System can be defined as vehicle mapping system which collects rapidly spatial data by integrated Gps/digital imaging system. Kinematic positioning by GPS is essential technology of Mobile Mapping System. This paper aims at analysing the accuracy and efficiency of kinematic positioning by GPS platformed on moving vehicle. For the purpose, roads were surveyed by vehicle/kinematic GPS. The results show that vehicle/kinematic GPS can measure spatial position faster, and still maintain a reasonable accuracy. But inertial navigation system and GPS should be integrated to compute continuous vehicle track and overcome gaps by blocked satellite signals for the more accurate positioning.