• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.22-32
• /
• 2022

The domestic smart factory is being built and spread rapidly, mainly by mid-sized companies and large enterprises according to the government's active introduction and support policy. But these factories only promote production system and efficiency, so harmfulness and risk factors are not considered. Therefore, to derive harmful risk factors in terms of industrial safety for 12,983 government-supported smart factory workplaces from 2014 to 2019, industrial accident status analysis compared workplaces with automation facilities and government-supported workplaces with automation facilities. Also, to reduce risks associated with domestic smart factory processes, twenty government-supported workplaces with automation facilities underwent analysis, evaluating risks through a status survey using the process evaluation table. In addition, the status survey considered region, size, industry, construction level, and accident rate; the difference in risk according to the structure of the process was confirmed. Based on the smart factory process evaluation results, statistical analysis confirmed that serial, parallel, and hybrid structures pose different risk levels and that the risks of mixed structures are greater. Finally, safety control system application was presented for risk assessment and reduction in the smart factory process, reflecting the results of disaster analysis and actual condition investigation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.1
• /
• pp.82-87
• /
• 2004

Hydrogen is considered to be the most important future energy carrier in many applications reducing greenhouse gas emissions significantly. To be applicable as energy carrier the safety issues associated with hydrogen applications needs to be investigated and fully understood. In order to analyze the risks associated with hydrogen applications, accidents associated with hydrogen in Korea from 1963 to 2002 have been analysed in this work. From analysis of accidents, we propose the necessity of research on hydrogen releases, dispersion in air, and explosion due to high hazardous of hydrogen.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.634-638
• /
• 2015

Four major social safety indexes including industrial accident, traffic accident, fire, and violent crime were selected, and transition of those values by time series data analysis since 2003 was presented. Comparing with the 2003 figure, the index of industrial accident was reduced by 27.8%, which was the most improved safety index. The indicators describing the traffic accident and violent crime rate were reduced by approximately 12%. However, the fire safety index showed an increase of 40% compared with the base year because national fire classification system was changed so that minor fire is also included in the counting since 2006.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.75-89
• /
• 2024

The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.63-71
• /
• 2002

Accident analyses are used to identify common factors contributing to occupational accidents and to give recommendations for accident prevention. This study concerns with the accident characteristics and prevention in the telecommunication service industry. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. Three hundred and forty-five injury accidents which results in more than 4 days absence were surveyed. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injured body part, and accident agency. We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in the telecommunication service industries.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.141-149
• /
• 1999

At present time, industrial accidents statistics are used as the basic data of the policy to prevent industrial accidents and the plan to applicate the industrial accident insurance. But this statistical data is not sufficient for the effective safety management because it is the expression of the itemized distribution and the frequency for the whole cases. This study tried to correlational analysis for each causes by defining investigational items as their accident parameters. The correlational analysis, between the unsafe action and status and their relational causes, was performed to analyze the occurrence causes of industrial accident. And to assume the severity of accident, the correlativity and independency between causes and direct causes which are defined hospital days subordinate parameter were analyzed. In addition, this study expressed numerically the effectiveness of subordinate parameters depended on the level of independent parameter by presenting the predictive model between dependent parameter and independent parameter, which have the categorical parameter, through the Logit analysis method.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.9-17
• /
• 2000

For the accident prevention, it is necessary to identify common factors and characteristics contributing to the industrial accidents. This study concerned with the accident characteristics by age of injured person in the manufacturing industries. To make the statistical comparisons for the accident characteristics by age group, we derived the distributions of occupational injuries in terms of accident time, accident type, activity at time of accident, injury type, injured part of body, agency of accident, and workday losses. The results show that the characteristics of the occupational injuries by age group are not significantly different in a31 characteristics investigated in this study.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.16-21
• /
• 2012

The purpose of this study is to try to find the risk of roller(mixing mill) in working site. In order to achieve the purpose, accident analysis and survey was carried out. This analysis revealed that average of loss days is 334.3 by roller jamming accident and 229.2 by other causes. It means jamming accident entails serious bodily harm. According to our research, we realize that most of rollers have some risk of the jamming accidents. It is simply because the roll gap in the roller is not more than 10cm. It also does not meet minimum distance so as to avoid the risk for jamming accident by KS. Furthermore, 28% of rollers have only one switch and 40% of rollers have two switches operating emergence stop equipment so as to reduce the risk of jamming accidents. Therefore, we presume that it is very difficult to turn on the switch of emergence stop equipment when they confront the accident because most of engineers are working alone.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.106-110
• /
• 2001

For the policy makers and managers as well as the workers at work, it is important to identify what affects, to what extent, the safety level and costs of work sites. Within this context, the author analyzes fifteen construction work sites of the Incheon International Airport from 1996 to 1999 and shows that the expenditures for safety personnel and education programs contribute to reducing industrial accident costs. In addition, the author demonstrates that the regression analysis out-performs Heinrich method in estimating the accident costs of those work sites.