• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.57-64
• /
• 2015

Carbon dioxide extinguishing systems are broadly used for onshore and offshore fire accidents because of excellent performance and low cost. However, there is risk with carbon dioxide systems, which have caused many injuries and deaths by suffocation associated with industrial and marine fire protection applications. In this study, a numerical analysis was performed to predict the fire suppression characteristics of a carbon dioxide system in the compressor room of ships. A double protection safety system is suggested to prevent suffocation accidents from carbon dioxide extinguishing systems. Four scenarios were selected to study the variation of the heat release rate, maximum temperature, a $CO_2$ and $O_2$ mole fraction, and fire suppression characteristics with the carbon dioxide system. The importance of proper design is suggested for a ventilation system in the compressor room of ships.

• Journal of Trauma and Injury
• /
• v.27 no.4
• /
• pp.126-132
• /
• 2014

Purpose: The field trauma triage for injured patients is essential for trauma care system. In this study, agreement of patient evaluation between by prehospital EMS personnel and by hospital staffs and the appropriateness of prehospital triage were evaluated. Methods: This observational study was conducted from September to October 2012 for 5 weeks. During this period, EMT evaluated patient's severity according to guideline for field triage and recorded. Same guideline was applied in 26 hospitals for patients with EMS use. Kappa statistics were used to measure agreement for each item of guideline. Finally, over-triage and under-triage rate of EMT were calculated. Results: During study period, total 3,106 patients were transferred to 26 hospital emergency departments with EMS use. Kappa statistics for "vital signs" items were 0.45 for mentality lower than V and 0.44 for systolic blood pressure lower than 90 mmHg as a moderate agreement. In "anatomy of injury" items Kappa statistics were very low. In "mechanism of injury" items Kappa statistics were 0.28 for high-rise fall down and 0.27 for high energy traffic accident but in other items Kappa statistics were very low. 362 patients (12.0%) were over-triaged and 281 patients (9.3%) were under-triaged. Conclusion: Field triage can be applied but need to evaluate and modify in order to become accurate and sensitive for decision of transportation.

• Journal of the Society of Disaster Information
• /
• v.7 no.4
• /
• pp.266-272
• /
• 2011

This study is focused on guard major collegians who are composed of factor in medical emergency system. In the case of cardiac failure, it is to make its basic data develop its education program of CPR which can increase the patient's survival rate before his hospitalization. The subject of study is composed of 120 persons who are 94 boy-collegians(78.3%) and 26 girl-collegians(21.7%) in sex and 66 first-grade collegians(55.0%) and 54 second-grade collegians(45.0%) in a school year. There is significant difference in the practices of artificial respiration and the thorax pressure after the education of basic CPR in sex(p<0.01). The practices of artificial respiration in boy-collegians($93.72{\pm}4.21$) is higher than in girl-collegians($82.31{\pm}6.36$) and the practices of thorax pressure in boy-collegians($92.45{\pm}4.44$) is higher than in girl-collegians($88.08{\pm}6.49$). The satisfaction degree of boy-collegians($4.33{\pm}0.59$) is higher than that of girl-collegians($3.73{\pm}0.67$) after theory & practice education of basic CPR(p<0.01). It is necessary to develop the education program and educate its knowledge & technology in proportion to collegians characteristics of sex and school year. Also, education authorities should develop a subject of the accident provided the practical education of CPR for guard major collegians.

• Science of Emotion and Sensibility
• /
• v.9 no.2
• /
• pp.93-100
• /
• 2006

This paper aims at the development and clinical evaluation of the wireless gyro-mouse system. The wireless gyro-mouse system is a computer interface with gyro-sensor and wireless communication, for the patients with upper-extremity disabled from the traffic accident or stroke to use the computer software i.e. internet browser. In the development, we focused on, firstly, to make the system wireless for the patients to manipulate the mouse easily even on the bed or wheelchair, secondly, to insert the gyro-sensor into a headband for easy don-and-doff and aesthetic appearance, thirdly, to devise a click switch in case of $C5{\sim}C6$ patients and a head nodding detection in case of C4 patients for sending click message to computer operating system. We performed evaluation experiment for patients with upper-extremities disabled from spinal cord injury. The results show that the displacement error of the cursor position against the target position during linear (vertical/horizontal) movement manipulation decreased with trial number. The click rate per minute also increased with trial number. This indicates the developed wireless gyro-mouse system would be more useful to the patients with repetitive use.

• Journal of Food Hygiene and Safety
• /
• v.18 no.3
• /
• pp.133-138
• /
• 2003

The data on outbreaks of puffer fish poisoning during 1991 to 2002 in Korea were gathered from press reports, and characterized information collected. During the period, a total of 32 outbreaks of puffer fish poisoning was reported. These outbreaks caused 111 persons to become poisoning, among the cases 30 persons were fatal. The mean case fatality rate was 27.0%, and most of deaths (93.3%) were the male of above 29 years old. Patient number of below 4 persons per a poisoning accident occupied 75.0% of total outbreaks; 65.8% of total cases; and 66.7% of total deaths) was occurred in the months, November through January. Most of puffer fish poisoning (75.0% of total outbreaks; 68.5% of total cases; and 73.3% of total deaths) were found along the south coastal area of Korea, including Busan, Gyeongsangnam-do, Jeollanam-do and Jeju-do. Over than 80% of puffer fish poisoning outbreaks occurred at fishing boat and home where privately made food was cause, and outbreaks in restaurants accounted for 15.6%. Most commonly implicated foods were Guk, boiled soup with puffer fish meat and spices.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.77-86
• /
• 2016

Before urban railway vehicles reach their design life-span, operating agencies should determine when to buy new vehicles. Previous LCC (Life Cycle Cost) studies were limited because they independently focused on existing vehicles based on costs that directly impacted only the operating agency without considering effects such as social costs and the reduction of maintenance costs. Thus, it is difficult to systematically determine when to buy new vehicles. This study investigated the operating and maintenance related costs, especially from additional expenses and social costs due to unexpected vehicle failures and safety accidents, and did an economic analysis of scenarios with different discount rates. Considering that the public is very concerned about safety after the Sewol ferry accident, additional costs, which include social costs, should be included in the analysis. This study shows that the economic priority of scenarios may change depending on whether those costs are included and on the discount rate. The results of this study can help in the decision-making process for the planning and buying of new trains.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.593-596
• /
• 2018

The speed of vehicles has remained a significant factor that influences the severity of accidents and traffic accident rate in many parts of the world including South Korea. This behavior where drivers drive at speeds which exceed a posted safe threshold is known as 'speeding'. Over the past twenty years, the Korean National Police Agency (NPA) has become aware of an increased frequency of drivers who are speeding. Therefore, fixed-type ASE systems [1] have been installed on hazardous road sections of many highways. These system monitor vehicle speeds using a camera. However, the use of ASE systems has changed the behavior of the drivers. Specifically, drivers reduce speed or avoid the route where the cameras are mounted. It is not practical to install cameras at every possible location. Therefore, it is challenging to thoroughly explore the location where speeding occurs. In view of these problems, the author of this paper designed and implemented a prototype visualization system in which point and color are used to show vehicle location and associated over-speed information. All of this information was used to create a comprehensive visualization application to show information about vehicle driving. In this paper, we present an approach detecting vehicles moving at speeds which exceed a threshold and visualizing the points those violations occur on a map. This was done using vehicle trajectory data collected in Daegu city. We propose steps for exploring the data collected from those sensors. The resulting mapping has two layers. The first layer contains the dynamic vehicle trajectory data. The second underlying layer contains the static road networks. This allows comparing the speed of vehicles on roads with the known maximum safe speed of those roads, and presents the results with a visualization tool. We also compared data about people who drive over threshold safe speeds on each road on days and weekends based on vehicle trajectories. Finally, our study suggests improved times and locations where law enforcement should use monitoring with speed cameras, and where they should be stricter with traffic law enforcement. We learned that people will drive over the speed limit at midnight more than 1.9 times as often when compared with rush hour traffic at 8 o'clock in the morning, and 4.5 times as often when compared with traffic at 7 o'clock in the evening. Our study can benefit the government by helping them select better locations for installation of speed cameras. This would ultimately reduce police labor in traffic speed enforcement, and also has the potential to improve traffic safety in Daegu city.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.349-357
• /
• 2016

Recently, the quantity of risk in construction project has been inflated due to the fact that current construction projects have been large and complicated. Therefore, a study on the risk management methods is necessary that can predict and respond to the need in complicated modern construction projects. In this study, the objective is to analyze the cause of accident in actual construction sites and develop a risk assessment model based on insurance claims records. To reach the goal of this study, first, the frequency and severity of accidents are analyzed the causes of accidents based on the classification; progress rate, season, and total construction costs. Second, a risk assessment model is developed by utilizing a multiple regression analysis. The dependent variable is loss ratio of material damage and three categories; natural hazards, geographic information, and construction method & ability, are used as the independent variables. The model's adjusted R-square is 0.455. The contributions of this study will be used as a material for a quantitative risk analysis model development and review of the construction risk factors for future study.