• Smart Structures and Systems
• /
• 제8권2호
• /
• pp.157-172
• /
• 2011

A new method for both local damage(s) identification and input excitation force identification of beam structures is presented using the dynamic response sensitivity-based finite element model updating method. The state-space approach is used to calculate both the structural dynamic responses and the responses sensitivities with respect to structural physical parameters such as elemental flexural rigidity and with respect to the force parameters as well. The sensitivities of displacement and acceleration responses with respect to structural physical parameters are calculated in time domain and compared to those by using Newmark method in the forward analysis. In the inverse analysis, both the input excitation force and the local damage are identified from only several acceleration measurements. Local damages and the input excitation force are identified in a gradient-based model updating method based on dynamic response sensitivity. Both computation simulations and the laboratory work illustrate the effectiveness and robustness of the proposed method.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.103-111
• /
• 2017

Purpose: Accelerated degradation tests can speed time to market and reduce the test time and costs associated with long term reliability tests to verify the required service life of a product or material. This paper proposes a service life prediction method for components or materials using an accelerated degradation tests based on the relationships between temperature and the rate of failure-causing chemical reaction. Methods: The relationship between performance degradation and the rate of a failure-causing chemical reaction is assumed and least square estimation is used to estimate model parameters from the degradation model. Results: Methods of obtaining acceleration factors and predicting service life using the degradation model are presented and a numerical example is provided. Conclusion: Service life prediction of a component or material is possible at an early stage of the degradation test by using the proposed method.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.616-623
• /
• 1999

엘리베이터의 속도패턴은 출발시부터 목표 위치 근처에 다다를 때까지의 시간기준 속도패턴과 정밀한 정위치 정지를 위한 거리기준 속도패턴등로 이루어진다. 시간기준 속도패턴에서 거리기준 속도패턴으로 절환시 속도와 가속도의 급격한 변화가 없도록 하여야 패턴 절환시의 충격을 최소화하여 안락한 승차감을 얻을 수 있다. 본 논문에서는 속도패턴 절환 시 항상 속도와 가속도가 연속이 되도록 하고, 또한 목표 위치로의 수렴 속도를 개선한 새로운 엘리베이터 속도패턴 발생 방법을 제시한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.637-644
• /
• 2006

Acceleration time history used in the seismic analysis of nuclear porter plant structure should envelop a target power spectral density (PSD) function in addition to design response spectrum. Current regulation guide defines the target PSD function only for the U.S. URC RG 1.60 Design Response Spectrum. This paper proposes a technical scheme to obtain the target PSD function compatible with generally defined design response spectrum. The scheme includes the methodology for design-spectrum compatible motion history in order to minimize the variation of the derived target PSD function. The PSD calculation procedure follows simple and practical methods allowed within regulation. Effectiveness of the proposed scheme is identified through an example problem. The design response spectrum In the example is based on U.S. NRC RG 1.60 but amplifies the spectral acceleration amplitudes above 9Hz. The target PSD function with little variation can be constructed with the reduced time history ensemble.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.237-244
• /
• 2022

Eco-driving of vehicles today presents an advantage that aims to reduce energy consumption and limit CO2 emissions. The application for this option is possible to older vehicles. In this paper, we propose an efficient implementation for IoT (Internet of Things) system for controlling vehicle components that affect the quality of driving (acceleration, braking, clutch, gear change) via Smartphone using Wi-Fi and BLE as communication protocol. The user can see in real-time data from sensors that control driver action on vehicle driving systems such as acceleration, braking, and vehicle shifting through a web interface. Thanks to this communication, the user can control his driving quality and, hence, eco-driving can be achieved

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.55-64
• /
• 2023

Energy-based seismic design and evaluation methods are promising to be involved in the next generation design codes. Accordingly, determining the distribution of earthquake input energy demand among floor levels is quite imperative in order to develop an energy-based seismic design procedure. In this paper, peak floor input energy demands are achieved from relative input energy response histories of several reinforced concrete (RC) frames. A set of 22 horizontal acceleration histories selected from recorded near-fault earthquakes and scaled in time domain to be compatible with the elastic acceleration design spectra of Turkish Seismic Design Code are used in time history analyses. The distribution of the computed input energy per mass values and the arithmetic means through the height of the considered RC frames are presented as a result. It is found that spatial distribution of input energy per mass is highly affected by the number of stories. Very practical yet consistent formulation of distributing the total input energy to story levels is achieved, as a most important contribution of the study.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.25-32
• /
• 1995

In highly automated milling process, in-process monitoring of the malfunction is indispensable to ensure efficient cutting operation. Among many malfunctions in milling process, chatter vibration deteriorates surface finish, tool life and productivity. In this study, the monitoring system of chatter vibration for face milling process is proposed and experimentally estimated. The monitoring system employs two types of sensor such as cutting force and acceleration in sensory detection state. The RMS value and band frequency energy of the sensor signals are extracted in time domain for the input patterns of neural network to reduce time delay in signal processing state. The resultes of experimental evaluation show that the system works well over a wide range of cutting conditions.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.149-156
• /
• 1995

This paper presents a method of detecting chatter vibration in end-mill process. The detecting system consists of an adaptive signal processing scheme which uses an autore- gressive time-series model and a neural network is proposed and is verified its effectiveness by using acceleration and cutting force signals recorded during slotting in end-mill operations. Expeerimental results indicate that the proposed system provides excellent detection when chatter is occured within the ranges of cutting conditions considered in this study and an effectiveness of the integration of signals is confirmed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권3호
• /
• pp.130-139
• /
• 2016

국내의 지진 발생 추이가 증가세를 보이고 있으며, 이에 따라 시설물 피해를 주고 큰 인명 피해를 초래하는 지진재해에 대한 대비의 중요성이 대두되고 있다. 지진재해에 대비하기 위해서는 지진 또는 진동가속도에 대한 실시간 계측을 하는 것이 중요하다. 일본과 미국의 경우 중요 시설물에 대하여 이미 실시간 지진가속도계측을 시행하고 있으며 계측된 지진가속도데이터는 데이터베이스화되어 관리되고 있다. 이를 이용해 내진설계기준 개정시 또는 지진으로 인한 피해 예측시 활용하고 있다. 국내의 경우, 최근 지진재해대책법 및 시행규칙이 개정되어 공포되었으며, 국민안전처에서 지진가속도계측자료 통합관리시스템을 구축해 나가고 있는 상황이다. 본 연구의 목적은 국민안전처 통합관리시스템에 연계가 가능한 시설물 실시간 진동 감지 및 분석 시스템을 개발 하는 것이다. 이 시스템은 지진가속도계측데이터 모니터링 기능을 포함하며, 또한 고속푸리에변환, 고유진동수 추출, 응답스펙트럼, 파워스펙트럼, 진도 표출, 시설물 건전도 평가 등 다양한 가속도데이터 분석 기능을 갖추고 있을 뿐만 아니라 국민안전처 지진가속도계측자료 시스템에 연계가 가능하도록 설계되었다. 개발된 시스템은 시설물의 안전관리 네트워크 구축, 지진 또는 진동으로 인한 시설물의 피해에 대한 대비, 유지관리 비용의 최소화에 긍정적인 효과가 있을 것이라고 판단된다.

• Water Engineering Research
• /
• 제2권4호
• /
• pp.243-259
• /
• 2001

Local phenomena around bridge piers and abutments are generally considered to be similar, nevertheless the presence of the incoming boundary layer on the side wall in the abutment case generates extra pressure gradients and consequently a more complex vortex pattern. In the literature, experimental data for bridge abutments are relatively scarce; in particular almost no data are available for the time evolution of the scour. In this work we present the results of several long duration (3 days longrightarrow5weeks) clear water scour laboratory tests around bridge abutments; the time evolution of the erosion process is analysed with respect to local and global characteristic values (maxima, volume, hole shape). In particular we analyse the effect of the constriction ratio b/B between the transversal obstacle dimension and the flume width: in many practical situations abutments (or piers) obstruct a significant portion of the channel, so that the average acceleration due to constriction is expected to increase the scour effects of the local acceleration around the obstacle. Measured values for maximum scour are poorly predicted by literature formulas. Scour depths are positively correlated with the constriction ratio, but increases are smaller than expected from literature indications. Experimental results show that models for bridge piers cannot be directly applied to abutments; in particular, time scales for the latter are significantly larger than for piers.