• Wind and Structures
• /
• 제9권5호
• /
• pp.397-412
• /
• 2006

This paper presents the wind excited acceleration responses of a 50 m guyed mast under the action of Typhoon Dujuan. The response of the structure is reconstructed from using a full finite element model and an equivalent beam-column model. The wind load is modelled based on the measured wind speed and recommendations for high-rise structures. The nonlinear time response analysis is conducted using the Newton Raphson iteration procedure. Comparative studies on the measured and computed frequencies and acceleration responses show that the torsional vibration of the structure is significant particularly in the higher vibration modes after the first few bending modes. The equivalent model, in general, gives less accurate amplitude predictions than the full model because of the omission of torsional stiffness of the mast in the vibration analysis, but the root-mean-square value is close to the measured value in general with an error of less than 10%.

• 연구논문집
• /
• 통권33호
• /
• pp.67-79
• /
• 2003

The life of oilless bearing affects the durability of scroll compressor. The main shaft of the scroll compressor is supported by oiiless bearing. Some of the major parameters which influence the life of oilless bearing are rotational speed, normal load, environment of refrigerant and oil film thickness. The reliability evaluation of oiiless bearing is performed through the acceleration life test for reduction of experimental time and costs. In this study, the experimental and computational investigations were performed to verify the effects of various parameters on the life of oilless bearing. The acceleration factor was achieved with the lubrication analysis between the scroll compressor and the developed reliability tester. the expected life of oilless bearing was guaranteed by reliability evaluation accompanied with the acceleration life test.

• 천문학회보
• /
• 제39권1호
• /
• pp.70.1-70.1
• /
• 2014

We study the origin and acceleration mechanism of solar energetic particles (SEPs), which are one of the major causes of hazardous impacts in the space weather. By adopting the velocity dispersion to the multi-channel energy band observations from SOHO/ERNE and Wind/3DP, we estimate the onset time for each energy band and investigate coronal structure and CME's dynamics associated with the SEPs. Through this study we will find clues to answer the questions about the origin and acceleration of SEPs as well as their associated with flare and/or CMEs. We will apply our findings to improve the forecasting system of the solar radiation storms.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.16-21
• /
• 2003

The accuracy in maneuvering target tracking using multiple models is resulted in by the suitability of each target motion model to be used. The interacting multiple model (IMM) method and the adaptive IMM (AIMM) method require the predefined sub-models and the predetermined acceleration intervals, respectively, in consideration of the properties of maneuvers in order to construct multiple models. In this paper, to solve these problems, a genetic algorithm(GA) based-IMM method using fuzzy logic is proposed. In the proposed method, the acceleration input is regarded as an additive noise and a sub-model is represented as a set of fuzzy rules to calculate the time-varying variances of the process noises of a new piecewise constant white acceleration model. The proposed method is compared with the AIMM algorithm in simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2608-2610
• /
• 2000

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method will be used to estimate the vehicle parameters, mass, time constant, etc. The nonlinear model between the driving force and the vehicle acceleration will be chosen to design the state observer for the vehicle velocity and acceleration. It will be shown that the proposed observer is exponentially stable, and that the adaptive controller proposed in this paper is stable. It will be proved that the errors of the relative distance, velocity and acceleration converge to zero asymptotically fast, and that the overall system is also asymptotically stable. The simulation results are presented to investigate the effectiveness of the proposed method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.946-949
• /
• 2004

It is necessary to detect the tilt angle for control or monitoring of various systems such as ship, aircraft recreation facilities etc as well as bridge or building systems. However the electronic liquid charge type tilt sensor which is one of typical tilt sensor has many problems. Those are remarkably slow response time and limited mounting condition because or liquid viscosity coefficient and inertia etc. In this study we propose a tilt angle instrumentation method using piezoelectricity acceleration sensor. The method can he applied on moving mount We verified the validity of the method through experiment.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.37-50
• /
• 2006

The accelerated life tests of the catalytic gas sensor were performed at three different gas concentration conditions. From the test data, the power-Weibull model was estimated and the acceleration factor between test condition 25%LEL(Lowe Explosive Limit) and use condition 5%LEL was about 3 according to this acceleration model. Using this acceleration factor, life test specification for qualifying that B10 lifetime of the catalytic gas sensor meets the goal lifetime (5 years) was designed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.104-105
• /
• 2013

The buildings constructed with steel structure is coated with certified fire resistive material to resist from fire. Coating materials lose their initial performances as time passes, so they need some maintenance. Fireproof spray-application also loses its performance and this performance loss of thr fireproof spray-application is very important because fire resistance of buildings depends on fireproof spray-application. So this study is to develop Acceleration durability test method of Fireproof spray-application, and use the Certification of fire resistant coating system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권1호
• /
• pp.45-50
• /
• 2001

With increasing complexity of digital logic circuits, fast and accurate verification of functional behaviour becomes most critical bottleneck in meeting time-to-market requirement. This paper presents several techniques for accelerating a cycle-based logic simulation. The acceleration techniques include parallel pattern logic evaluation, circuit size reduction, and the partition of feedback loops in sequential circuits. Among all, the circuit size reduction plays a critical role in maximizing logic simulation speedup by reducing 50% of entire circuit nodes on the average. These techniques are incorporated into a levelized table-driven logic simulation system rather than a compiled-code simulation algorithm. Finally, experimental results are given to demonstrate the effectiveness of the proposed acceleration techniques. Experimental results show more than 27 times performance improvement over single pattern levelized logic simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.424-429
• /
• 2013

The trolley carrying the pod moves along by the airfield runway. The pod through the trolley are subjected to vibration arising from the ground state, the precision optical components in the pod can have a significant impact. The road tests were conducted by using the measurement pod to remove the risk for the project. The measurement pod was composed with the ACRA, sensors, battery. The accelerometers were attached to get the acceleration through the road condition. The PSD envelop was calculated by FFT from the acceleration. The driving safety was proven through comparing the measurement data and MIL-STD-810G specification.