• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.5-10
• /
• 2013

The pole side crash caused fatal injury by comparison with other crash impact mode such as frontal and rear crash. EuroNCAP proposed the pole side crash test using WorldSID(World Side Impact Dummy). The objective of this study is to develop the pole side impact sled test using dummy rib deflection between crash and sled test. In the pursuit of this purpose, we fabricated new pole side sled buck and test preliminary pole sled using ES-2re. Through this, we found the sled acceleration pulse scale. Hardness and thickness of the EPP affects the rib deflection. We conducted the pole sled test using WorldSID based on the preliminary results. As a result, rib deflection was shown to correlate well between crash test and pole side sled test.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.267-274
• /
• 1999

An understanding of the natural frequencies of a beam is virtually a prerequisite to the understanding of its response in forced vibration due to shock, ground acceleration or moving loads. Contrary to the frequencies of the prismatic bars with arbitrary boundary conditions, those of a tapered bar are hard to determine when one employs convevtional neutral equilibrium or energy method. In this paper, finite element method is adopted to determine the fundamental frequencies of the non-symmetrically tapered bars. The bars assume the shapes of straight lines along the axis. The parameters considered in this study are sectional parameter, m,n and taper parameter, $\alpha$ For the structural engineer's convenience, the results by finite element method are expressed by simple algebraic equations, by which first mode frequencies are easily estimated. And they agree fairy well with those by F.E.M in most cases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.873-878
• /
• 2013

An EOTS (Electro-Optical Tracking System) provides stabilized images while tracking a moving target. This paper presents a novel concept of driving the outer gimbal first for improving the maneuverability of an EOTS, contrary to the conventional inner gimbal mode. It has the advantages of faster positioning performance and stable operation in Nadir-point. Analysis of frequency responses reveal that the present scheme results in a wider control bandwidth and larger gain margin, compared to those of the previous one. The actual experimental results confirm that the maneuvering is stable although the input command has a large angular acceleration.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.10
• /
• pp.701-707
• /
• 2000

This paper proposes a tension control to compensate friction loss using on-line friction torque observer for a continuous strip processing line. Friction loss of roller results in significant deviation of strip tension, accordingly it has an influence on the operation of other adjacent rolls. To avoid tension variation of the strip, a friction torque observer is designed in adjacent roll, which operates in speed control mode. The observed torque is added to the torque limit reference of the pay-off reel for on-line compensation of both friction loss and acceleration/deceleration torque at the same time. The simulation and experimental results show improvement of tension control performance by the proposed friction compensation method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.156-160
• /
• 2012

Recently WCDMA signal transmission technology by large output microwave antenna have showed reduction of human resources and operating expense. But the existing antenna brackets cost is very expensive also its structure and functions are complicated. Unit brackets, suspending some sensors, subjected to acceleration loads, often fail due to self-vibration. To prevent such failures, it is necessary to understand the fatigue failure mode and to evaluate the fatigue life using tests or analysis techniques. The objective of this study is to develop the component test specifications, which are applicable to predict fatigue life at initial product design step, for unit brackets using vibration fatigue technique. So its application is limited to installation and management. In this project, we studied about more convenient bracket for microwave antennas through improvement on the existing antenna bracket's shortcoming and could develop an improved universal antenna bracket system for simple installation and application.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.18 no.3
• /
• pp.11-27
• /
• 1981

This paper is prepared to solve the problem of two-dimensional sinusoidal motion of hydrofoil, which can be related not only to the prediction of unsteady forces acting on the marine propeller blade but to the study of aquatic animal's undulatory mode of propulsion. For convenience's shake, this manuscript can be devided into two parts. In the first part, the lift and moment coefficients have been calculated by the method of conformal transformation. In the other part, the thrust and the hydromechanical efficiency have been evaluated, using Lagally's technique having extended to the unsteady case, they also have been compared with the results, which had been obtained by Lighthill[6] and Wu[7] using Prandtl's acceleration potential.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.2
• /
• pp.99-108
• /
• 2000

구조물의 능동제어 시스템에서 제어기 설계에 사용되는 구조계의 모델과 실구조계의 차이는 시스템의 성능저하 및 불안정성을 유발할 수 있다 이연구에서는 무시된 고차모우드와 같이 주파수영역에서 표현되는 비구조적 불확실성에 대하여 시스템의 안정성을 보장하도록 강인성을 가지는 LQG/LTR제어이론을 사용하여 구조물의 지진응답제어에 효과적으로 사용할 수 있는 제어기 설계방법을 제시한다 특히 고층건물이나 교탑과 같은 구조물의 지진응답 제어에 적용할 수 있도록 각층의 절대 가속도를 측정변수로 층간상대변위를 제어변수로 설정하여 최적제어기를 구성한다 El Centro 지진압력을 받는 6자유도 전단빌딩모델에 대하여 제어기를 설계하거 수치모사를 수행하여 제시한 제어기가 안정도-강인성을 가지고 지진응답제어에 효과적임을 보인다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.5
• /
• pp.237-244
• /
• 2017

This study proposes a numerical model to explain the closely placed double modes in the vibration of a layered stone pagoda system. The friction surface between the stones is modelled as the Timoshenko finite element while each stone layer is modelled as a rigid body. It is assumed that the irregular asperity on the friction surface enables the stone to be excited. This results in the closely placed modes that are composed of natural modes and self-excited modes. To examine the validity of the proposed model, a set of modal testing and analysis for a layered stone pagoda mock-up model has been conducted and a set of closely placed double modes are extracted. Applying the extended sensitivity-based system identification technique, the various system parameters are identified so that the modal parameters of the proposed numerical model are the same with those of the experimental mock-up. For a horizontal impulse excitation, the simulated acceleration responses are compared with measurements.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.69-72
• /
• 2004

The N-alkylation of 4-aminopyrimidine with a tetrahydro-3-aza-cyclopropa[c]inden-5-one, which is a model reaction of the pharmacophore of duocarmycins, was studied with a quantum chemical method. We consider two factors for the acceleration of the N-alkylation; distortion and protonation of the model pharmacophores. The distortion of the spirocyclopropyl moiety in the model spirocyclopropylcyclohexadienone could induce an intrinsic energy of 3-4 kcal/mol, but the protonation on the carbonyl oxygen of the model cyclohexadienone lowers the transition energy of the N-alkylation of 4-aminopyrimidine dramatically (~46 kcal/mol) and is considered to play a major role in the enzyme reaction. The distorted and protonated spirocyclohexadienone is exothermally relieved to a phenol with the heat of reaction of -37 kcal/mol. The protonation process is proposed to be the mode of action of duocarmycins in the DNA alkylation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1092-1099
• /
• 1992

In this paper, a sensitivity of the gravity acceleration $(0{\sim}1G)$ for a fiber-optic accelerometer is demonstrated. A single mode optical fiber Mach-Zehnder interferometer was used to detect the change in optical path length produced by the strain in the fiber from probe mass about 1 gram. The phase conversion gain of the piezoelectric cylinder in the reference arm with this system measures 0.88rad./v.