• Title/Summary/Keyword: Absorption Properties

검색결과 3,682건 처리시간 0.038초

알긴산을 이용한 코팅쌀의 개발 및 품질 특성 (Development of Alginate-Coated Rice and Its Quality)

  • 박인배;이태훈;이수영;정동옥;박양균;김정목;정순택;강성국
    • 한국식품저장유통학회지
    • /
    • 제12권6호
    • /
    • pp.546-551
    • /
    • 2005
  • 알긴산을 이용한 기능성 쌀을 개발하고자 제조공정을 확립 및 생산설비를 제작하고 알긴산 코팅 쌀을 제조하였으며 코팅정도, 흡습특성, 노화억제 효과 및 관능특성을 분석하여 품질특성을 검토하였다. 알긴산 코팅 쌀의 수분함량은 일반 쌀에 비하여 약 $1.5\%$정도 높은 $16.5\~l8\%$ 수준을 보였다. $2\%$알긴산으로 코팅한 쌀의 경우 일반쌀에 비하여 탄수화물 함량의 증가량을 측정한 결과 약 $0.3\%$정도 코팅됨을 알 수 있었다. 알긴산 코팅 농도가 높을수록 수분 흡습도가 높았으며 $2\%$ 알긴산으로 코팅한 쌀의 경우 $30^{\circ}C$, RH $85\%$의 항온항습조건에서 6주 동안 저장한 결과 일반 쌀에 비하여 $1.8\%$정도 수분함량이 증가하였다. 알긴산 코팅 쌀은 취반 후 상온에서 일반 쌀에 비해 약6시간정도 노화를 지연시켰으며 외관, 점착성, 맛 등에서 일반쌀에 비하여 높은 기호성을 보였다. 뿐만 아니라 알긴산 코팅 쌀은 현대인의 식생활에서 부족할 수 있는 식이섬유를 보충해 줌으로써 영양적인 측면과 쌀의 품질향상과 식미개선 등 기능적 측면에서도 매우 우수하였다.

형광체 기반 X선 광 변조기를 위한 비정질 셀레늄 필름 특성 (Characterization of the a-Se Film for Phosphor based X-ray light Modulator)

  • 강상식;박지군;조성호;차병열;신정욱;이건환;문치웅;남상희
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권2호
    • /
    • pp.306-309
    • /
    • 2007
  • PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.

본차이나 소지용 인산칼슘 분말의 제조 및 적용에 관한 연구 (A Study on the Preparation and Application of Calcium Phosphate Powder to Bonechina Clay)

  • 김윤성;김준이;유중환;김형태
    • 한국세라믹학회지
    • /
    • 제41권12호
    • /
    • pp.921-928
    • /
    • 2004
  • 수용액의 pH, 소성온도, 반응시간 등을 변화한 조건하에서 $Ca(OH)_2$$H_{3}PO_4$ 수용액을 이용하여 인산칼슘계 화합물을 제조하였다. 산성분위기(pH=5.21)에서는 ${\beta}-TCP({\beta}-tricalcium phosphate)$가, pH>7.62에서는 HAp(hydroxyapatite)가 주 결정상으로 관찰되었다. XRD 분석결과, $Ca(OH)_2$$H_{3}PO_4$는 빠르게 반응(5분이내)하여 HAp를 생성하였고, 반응 16시간까지 안정적으로 구조를 유지하였다. 우수한 결정성을 나타내는 소성온도는 $1200^{\circ}C$로 관찰되었다. 주사전자현미경(SEM)에 의한 미세구조 관찰 결과, pH가 5.21일 경우 침상 형태의 ${\beta}-TCP$ 입자가, pH 7.62에서는 침상 형태의 HAp가 합성되었다. 그러나 pH 9.16에서는 매우 작고 균일한 구형의 HAp 입자들이 생성되었고, 다시 작은 입자들이 침상으로 재배열된 형상을 관찰할 수 있었다. 합성된 HAp(pH 9.16)를 본차이나 소지에 일정량 혼합하여 본차이나 물성, 즉 결정성, 흡수율, 색도, 파단면의 형상을 측정${\cdot}$분석하였다.

MONITORING OBSERVATIONS OF H2O AND SiO MASERS TOWARD POST-AGB STARS

  • Kim, Jaeheon;Cho, Se-Hyung;Yoon, Dong-Hwan
    • 천문학회지
    • /
    • 제49권6호
    • /
    • pp.261-288
    • /
    • 2016
  • We present the results of simultaneous monitoring observations of $H_2O$ $6_{1,6}-5_{2,3}$ (22GHz) and SiO J=1-0, 2-1, 3-2 maser lines (43, 86, 129GHz) toward five post-AGB (candidate) stars, using the 21-m single-dish telescopes of the Korean VLBI Network. Depending on the target objects, 7 - 11 epochs of data were obtained. We detected both $H_2O$ and SiO maser lines from four sources: OH16.1-0.3, OH38.10-0.13, OH65.5+1.3, and IRAS 19312+1950. We could not detect $H_2O$ maser emission toward OH13.1+5.1 between the late OH/IR and post-AGB stage. The detected $H_2O$ masers show typical double-peaked line profiles. The SiO masers from four sources, except IRAS 19312+1950, show the peaks around the stellar velocity as a single peak, whereas the SiO masers from IRAS 19312+1950 occur above the red peak of the $H_2O$ maser. We analyzed the properties of detected maser lines, and investigated their evolutionary state through comparison with the full widths at zero power. The distribution of observed target sources was also investigated in the IRAS two-color diagram in relation with the evolutionary stage of post-AGB stars. From our analyses, the evolutionary sequence of observed sources is suggested as OH65.5+1.3${\rightarrow}$OH13.1+5.1${\rightarrow}$OH16.1-0.3${\rightarrow}$OH38.10-0.13, except for IRAS 19312+1950. In addition, OH13.1+5.1 from which the $H_2O$ maser has not been detected is suggested to be on the gateway toward the post-AGB stage. With respect to the enigmatic object, IRAS 19312+1950, we could not clearly figure out its nature. To properly explain the unusual phenomena of SiO and $H_2O$ masers, it is essential to establish the relative locations and spatial distributions of two masers using VLBI technique. We also include the $1.2-160{\mu}m$ spectral energy distribution using photometric data from the following surveys: 2MASS, WISE, MSX, IRAS, and AKARI (IRC and FIS). In addition, from the IRAS LRS spectra, we found that the depth of silicate absorption features shows significant variations depending on the evolutionary sequence, associated with the termination of AGB phase mass-loss.

Effects of Al2O3 Coating on BiVO4 and Mo-doped BiVO4 Film for Solar Water Oxidation

  • Arunachalam, Maheswari;Yun, Gun;Lee, Hyo Seok;Ahn, Kwang-Soon;Heo, Jaeyeong;Kang, Soon Hyung
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권4호
    • /
    • pp.424-432
    • /
    • 2019
  • Planar BiVO4 and 3 wt% Mo-doped BiVO4 (abbreviated as Mo:BiVO4) film were prepared by the facile spin-coating method on fluorine doped SnO2(FTO) substrate in the same precursor solution including the Mo precursor in Mo:BiVO4 film. After annealing at a high temperature of 450℃ for 30 min to improve crystallinity, the films exhibited the monoclinic crystalline phase and nanoporous architecture. Both films showed no remarkably discrepancy in crystalline or morphological properties. To investigate the effect of surface passivation exploring the Al2O3 layer, the ultra-thin Al2O3 layer with a thickness of approximately 2 nm was deposited on BiVO4 film using the atomic layer deposition (ALD) method. No distinct morphological modification was observed for all prepared BiVO4 and Mo:BiVO4 films. Only slightly reduced nanopores were observed. Although both samples showed some reduction of light absorption in the visible wavelength after coating of Al2O3 layer, the Al2O3 coated BiVO4 (Al2O3/BiVO4) film exhibited enhanced photoelectrochemical performance in 0.5 M Na2SO4 solution (pH 6.5), having higher photocurrent density (0.91 mA/㎠ at 1.23 V vs. reversible hydrogen electrode (RHE), briefly abbreviated as VRHE) than BiVO4 film (0.12 mA/㎠ at 1.23 VRHE). Moreover, Al2O3 coating on the Mo:BiVO4 film exhibited more enhanced photocurrent density (1.5 mA/㎠ at 1.23 VRHE) than the Mo:BiVO4 film (0.86 mA/㎠ at 1.23 VRHE). To examine the reasons, capacitance measurement and Mott-Schottky analysis were conducted, revealing that the significant degradation of capacitance value was observed in both BiVO4 film and Al2O3/Mo:BiVO4 film, probably due to degraded capacitance by surface passivation. Furthermore, the flat-band potential (VFB) was negatively shifted to about 200 mV while the electronic conductivities were enhanced by Al2O3 coating in both samples, contributing to the advancement of PEC performance by ultra-thin Al2O3 layer.

단호박 분말을 첨가한 국수의 품질 특성 (Selected Physicochemical and Consumer Preference Characteristics of Noodles Incorporated with Sweet Pumpkin Powder)

  • 박주환;최지은;이준호
    • 한국식품영양과학회지
    • /
    • 제44권2호
    • /
    • pp.291-295
    • /
    • 2015
  • 단호박 분말의 첨가량을 달리하여 국수를 제조한 후 물리화학적 및 관능적 품질 특성을 비교하였다. 단호박 분말 첨가량이 증가할수록 국수의 pH, 당도 및 탁도는 유의적으로 증가하는 경향이 나타났다(P<0.05). 부피는 20% 첨가군(52.67 mL)이 가장 높았으며 단호박 분말의 첨가량이 많을수록 유의적으로 증가하였으나(P<0.05), 5~15% 첨가군 사이에서 유의적인 차이는 발견되지 않았다(P>0.05). 국수의 함수율은 대조군이 81.47%이며, 20% 첨가군이 53.80%로 단호박 분말 첨가량이 증가함에 따라 유의적으로 감소하는 경향을 나타내었으며(P<0.05), 수분결합능력 또한 유의적으로 감소하였다(P<0.05). 국수의 L* 값은 분말의 첨가량이 증가할수록 유의적으로 감소하였고(P<0.05), a* 값은 단계적인 유의적 증가를 보였으며(P<0.05), b* 값은 첨가군이 대조군보다 유의적으로 높았으나 첨가군(5~20%) 내에서 유의적인 차이는 발견되지 않았다(P>0.05). 국수의 전자공여능은 단호박 분말의 첨가량이 증가할수록 유의적으로 증가하였으나(P<0.05), 대조군과 5% 첨가군에서는 유의적인 차이가 발견되지 않았다(P>0.05). 한편 소비자 선호도 검사결과 씹힘성을 제외한 모든 항목에서 10% 첨가군이 다른 시료에 비해 유의적으로 높게 평가되었으며(P<0.05), 따라서 관능적 품질을 유지하면서 단호박 분말의 기능성 효과를 기대하기에 최적 첨가 농도는 10%가 가장 적절할 것으로 판단된다.

식용피 첨가에 의한 밀가루 반죽 및 국수의 특성 (Characteristics of Wheat Flour Dough and Noodles with Barnyard Millet (Echinochloa spp.))

  • 이윤상;윤향식;이상영;이정관;박철수;서우덕;우선희;송인규
    • 한국식품영양학회지
    • /
    • 제25권4호
    • /
    • pp.706-712
    • /
    • 2012
  • 국내에서 재배한 식용피의 소비 촉진을 위해 식용피 첨가가 밀가루의 제면 특성과 국수의 특성에 미치는 영향을 조사하였다. 밀가루에 식용피를 10~30% 첨가한 혼합분의 물리적인 특성, 아밀로오스 함량과 호화 특성, 단백질 함량과 침전가, 면대 두께 및 색도, 물성을 분석하였으며, 국수의 관능검사를 실시하였다. 식용피의 입자 크기와 회분은 $161.40{\mu}m$, 0.53%이었으며, 밀가루는 $82.11{\mu}m$와 0.53%이었다. 식용피 첨가량이 증가함에 따라 혼합분의 입자 크기는 증가와 회분 함량은 증가하였으며, 명도는 감소하였다. 호화 특성인 최고점도(peak viscosity), holding strength, 최종점도(final viscosity), setback은 식용피가 밀에 비해 높게 나타났으며, 식용피 첨가량에 따른 혼합분의 호화 특성은 일정한 경향을 보이지 않았다. 식용피 첨가에 의해 단백질 함량은 14.18%에서 11.96%로 감소하였으며, 침전가 또한 $54m{\ell}$에서 $32m{\ell}$로 감소하였다. 면대 두께는 1.65~1.8 mm로 범위에 속하였으며, 식용피 20% 첨가까지는 유의차가 없은 것으로 나타났다. 식용피 첨가에 의해 국수의 경도, 탄성, 점성은 모두 감소하는 경향을 나타내었다. 관능검사 결과, 식용피 첨가량 20%까지는 맛과 전반적인 기호도면에서 밀가루 국수와 유의차가 없는 것으로 나타났다.

졸겔법으로 제조된 MO-$SiO_2$(M=Zn,Sn,In,Ag,Ni)의 구조특성 (Structural Properties of MO-SiO$_2$(M=Zn, Sn, In, Ag, Ni) by Sol-Gel Method)

  • 신용욱;김상우
    • 한국재료학회지
    • /
    • 제11권7호
    • /
    • pp.603-608
    • /
    • 2001
  • 졸겔법에 의해 제조된$ MO-SiO_2$(M=Zn, Sn, In, Ag, Ni)이성분계 실리카 겔에서 금속이온의 종류에 따른 실리카 구조의 변화를 XRD, FT-lR, $^{29}$Si-NMR로 분석하였다. XRD peak을 관찰한 결과 $Ag-SiO_2$겔에서 $AgNO_3$의 부분적인 재결정화가 나타났지만, 첨가된 금속이온과 실리카 매트릭스의 결합에 의한 결정상은 관찰되지 않았다. FT-IR 분석결과 첨가되는 금속이온 중 Zn, Sn, In은 부분적으로 Si-O-M의 결합형태를 이루어 Si-O-Si 대칭 진동에 의한 흡수 peak의 위치를 변화시켰다. $^{29}$Si-NMR 관찰에 의해 Zn, Sn, In등의 금속이온은 실리카의 저온 졸겔 반응에 영향을 미치지 않고 불완전한 네트워크를 갖는 선형적 실리카 구조 내에서 비가교 산소와 결합하며 존재하였다. Ag, Ni는 실리카 네트워크가 형성되는 과정에서 실리카 형성을 위한 졸겔반응의 촉매로서 작용하여, 이러한 금속이온이 첨가된 실리카 네트워크는 보다 치밀한 구조적 특성을 나타내었다.

  • PDF

밀가루의 회분 함량이 냉동 생지 반죽의 물성에 미치는 영향 (The Effects of the Ash Content in Flour on the Rheological Properties of Frozen Dough)

  • 김석영;한재흥;송영;이시경
    • Applied Biological Chemistry
    • /
    • 제46권1호
    • /
    • pp.39-45
    • /
    • 2003
  • 냉동 생지 제조시 같은 밀을 이용해 회분 함량을 달리하여 제분한 밀가루로 만든 냉동 생지의 물성에 미치는 영향인 farinogram, amylogram. extensogram을 비교 조사하였고, 냉동 생지의 품질을 결정하는 2차 발효 시간, 빵 제품의 수분 함량,굽기 손실, 부피 및 경도에 미치는 영향을 $-20^{\circ}C$ 냉동고에서 제조직후부터 12주까지 저장하면서 비교 조사하였다. 회분 함량이 높은 밀가루의 경우 farinogram에서 흡수율과 약화도는 증가하였고, 반죽 전체의 강력도는 감소하였으며, 회분 함량이 낮은 밀가루의 경우 amylogram에서 반죽의 최고 점도시 온도와 최고 점도가 높게 나타났고, extensogram에서 면적과 저항도가 높게 나타났으며 발효 시간이 증가할수록 신장도는 감소하였고 2차 발효 시간도 가장 짧게 나타났다. 회분 함량이 높은 밀가루로 제조한 빵 제품의 수분 함량이 높게 나타났고 굽기 손실은 낮게 나타났으며 저장 기간에 따른 빵 제품의 경도 변화는 서서히 증가한 반면 회분 함량이 낮은 밀가루로 제조한 빵 제품의 부피가 가장 크게 나타났으며 경도는 낮게 나타났다. 냉동 저장 기간은 짧을수록 제품에 좋은 영향을 미치며 4주 이하가 가장 양호한 것으로 나타났다.

DETERMINATION OF MOISTURE AND NITROGEN ON UNDRIED FORAGES BY NEAR INFRARED REFLECTANCE SPECTROSCOPY(NIRS)

  • Cozzolino, D.;Labandera, M.;Inia La Estanzuela
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1620-1620
    • /
    • 2001
  • Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

  • PDF