• 소음진동
• /
• 제4권3호
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.321-324
• /
• 2008

Water retaining pavement is a pavement to lower the surface temperature by using evaporation of the water that the pavement contains when the pavement is heated by the sun in the daytime, so, to improve performance, the performance can absorb water. Most of the high-performance material that absorbs water swell $2\sim3$ times as much volume when it contact with water. Water retaining material exists independently of the material in the cement. so it doesn't have the space to expand. Therefore, the performance of absorbing water is decreased. Therefore, this study was to develop a foamed concrete and evaluation of performance characteristics using high absorptiveness resin. The result has been evaluated as excellent compared to other materials.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.133-137
• /
• 2003

When a light is projected upon a material, part of its radiation energy is absorbed and the rest is reflected or transmitted according to the nature of the material. The molecules of the substance absorbing a light obtains the radiation energy to the wavelength of the light to make photochemical degradation by ultraviolet ray or thermal reactions like physical damage by infrared ray. The degree of damage by radiation energy varies to the substances of materials, the spectral power distribution of the light source and the duration of irradiation. Because the damage brings about a devaluation of material and once damaged, it is irretrievable, it is necessary to minimize the damage and conserve the native quality of a material by a protective lighting system. A measuring system was set up to measure the temperature rise of each sample by infrared radiation from light sources. And the temperature rise and temperature distribution by various infrared lamps were measured with varying time.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.9-16
• /
• 2021

As the climate changes rapidly due to warming, it is becoming very important to ensure the stability of environmental structures. It is necessary to choose a material that withstands repeated external forces (wind loads) and satisfies members and joints that have energy absorbing power. Even if the strength of the traffic light attachment is sufficient, if the rigidity is insufficient, there is a limit to the displacement during strong winds. Excessive deformation may cause damage and fall, resulting in a safety accident. The author intends to study mechanical properties and resistance to external environment as a structural material capable of withstanding wind load (50m/sec) by fabricating a C/GFRP composite traffic light attachment using the pultrusion method (Pultrusion).

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.593-600
• /
• 2014

본 연구에서는 첨단 함형에 레이더 반사면적 감소기술을 적용하고 특성을 분석하였다. 특히, 레이더 반사면적에 영향을 주는 요소, 레이더 반사면적을 최소화 하는 방안, 표적의 특수 재질 물성에 대한 레이더 반사면적의 변화 영향을 고찰하였다. DDG-1000 type 첨단 함형의 함정 고각별 레이더 반사면적 해석 결과 고각이 10도 높아짐에 따라서 RCS 평균값이 23.91 dBsm 증가하는 것을 확인하였다. 또한, 함정 상부구조물의 경사각이 6도 증가함에 따라서 RCS 평균값이 1.27 dBsm 감소하는 것을 확인하였다. 마지막으로 상부구조물 앞면과 뒷면에 전파흡수체를 부착한 경우 RCS 평균값이 2.27 dBsm 감소 하는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.111-116
• /
• 2018

본 논문은 시스템 에어컨 실외기 포장품의 낙하충격해석 및 시험검증을 수행한 내용을 다룬다. 포장은 낙하충격으로 부터 제품을 보호할 수 있도록 충격에너지를 흡수할 수 있는 완충재질과 이를 제품에 고정하기 위한 부재로 구성되는데 작은 부피로 충분한 완충성능을 발휘하는 포장 설계를 위해서는 충격 시 제품에 가해지는 충격가속도 등을 정확히 평가하는 것이 필수적이다. 본 논문에서는 외연적 시간적분을 활용하는 유한요소해석 기법을 활용하여 실외기 포장품의 낙하충격해석을 수행하였다. 정확한 해석을 위한 해석모델 구축, 재료 시험을 통한 데이터 획득 및 재료 모델의 선정, 신뢰성 있는 해석 데이터 확보를 위한 계측 센서의 모델링 등이 수행되었으며 이렇게 구해진 해석데이터와 시험으로 구해진 가속도 및 변형률 시간이력을 비교하였다. 해석모델에 반영된 감쇄계수 등의 오차로 인하여 대체로 해석결과가 시험 결과에 비해 충격 가속도 및 변형률을 크게 예측하고 있으나 전체적인 데이터의 경향과 낙하 방향의 충격가속도는 정확하게 계산되었다. 이에 본 연구에 사용된 모델 및 해석기법을 에어컨 실외기 포장 설계에 활용할 수 있음을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.481-487
• /
• 2017

본 연구에서는 유기계 소재의 폴리우레탄 스펀지를 무기계 바인더 용액에 함침시킴으로써 유무기 하이브리드 구조의 흡음재를 개발하였다. 무기계 바인더 용액은 ${\alpha}$형 반수석고에 60%의 물과 경화 지연제, 유동화제, 아크릴 수지 등의 혼화 재료를 첨가하여 슬러리 용액으로 제조하였으며, 무기계 바인더 용액에 함침시킨 유기계 스펀지를 함침, 가압탈수, 건조시킴으로서 특성평가용 시료를 제작하였다. 개발 시료의 흡음률을 임피던스 관내법을 이용하여 시험 평가한 결과, NRC 흡음계수 값은 0.41로 기존에 시판되고 있는 흡음재들과 비교하여 2배 이상으로 우수한 흡음성능을 나타냈으며, 불연성능 시험평가 결과 준불연재료(2급) 기준을 만족함을 확인하였다. 또한 건축 내장재로서의 기초 시험평가 및 EL248. 규격에 따른 유해성분 시험평가를 통해 본 연구에서 개발한 유무기 하이브리드 소재가 흡음재뿐만 아니라 단열 및 보온재로서의 역할이 가능하며, 유해성 기준을 만족하는 친환경 건축소재로 활용 가능함을 확인하였다.

• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.28-34
• /
• 2019

점화원이 무엇이든 화염의 확산과 인체에 영향을 미치는 직접적인 요소는 가연물이다. 음악학원, 노래방 등에서 사용하고 있는 마감재인 흡음재는 폴리우레탄으로 구성되며 연소 시 다량의 유독가스를 발생한다는 것은 알려진 사실이다. 그럼에도 현행법은 학원의 경우 수용인원 100명 미만의 경우 난연 마감재를 사용해야 한다는 강행규정이 없다. 본 연구에서는 실제 음악학원에 설치된 흡음재를 수거하여 실화재 연소실험을 통해 화염확산 속도를 측정하였으며, MultiRaelite 복합가스 측정기(타겟물질 VOC, HCHO, SO₂, CO₂, CO, HCN, NO₂)를 이용하여 유독가스를 측정한 결과 Time weighted average (TWA)와 Short term exposure limit (STEL)의 허용농도를 초과하여 기기한계값이 측정되었다. 또한 시중에 판매중인 난연 흡음재와 비난연 흡음재를 비교 연소 실험한 결과, 착화 및 확산에 있어 현격한 차이를 보였다. 따라서 실험결과를 바탕으로 수용인원 100명 미만의 학원에도 난연 마감재 사용을 강제할 필요가 있음을 제언하고자 한다.

• Journal of Forest and Environmental Science
• /
• 제40권2호
• /
• pp.90-98
• /
• 2024

This study analyzes the characteristics of sound-absorbing materials made from forest by-products of the deciduous tree species Zelkova serrata (Z. serrata) by evaluating their sound absorption performance. Accordingly, sound-absorbing materials with varying sample thicknesses, leaf sizes, and drying conditions were fabricated. The sound absorption properties were measured using the impedance tube method via middle-type measurement tube (100 Hz-3,200 Hz). The sound absorption properties were evaluated using the average sound absorption coefficient (ASAC), which was calculated from the measured sound absorption coefficients at 250 Hz, 500 Hz, 1,000 Hz, and 2,000 Hz. The ASAC value significantly improved as the leaf size increased to 0.5×0.5 cm², 1.0×1.0 cm², and 2.0×2.0 cm². The ASAC values under the two drying conditions were similar. There was no significant difference in ASAC according to the leaf size under the air-dried leaf condition, with a thickness of 2.50 cm. The highest ASAC value according to the sound-absorbing material thickness was 0.47 at a thickness of 2.50 cm and leaf size of 2.0×2.0 cm² under the air-dried leaf condition. In addition, the variation in ASAC was 0.23, indicating that the sound absorption performance according to leaf thickness was more significant than the difference in absorption properties according to leaf size. A sound absorption coefficient (SAC) of 0.4 or higher was observed across the measurable frequency band (100 Hz-3,200 Hz). Furthermore, the SAC values with respect to leaf size and thickness were close to 1 in the high-frequency range above 2,000 Hz. Therefore, it is considered that sound-absorbing materials using Z. serrata leaves are advantageous in the field of absorbing noise in a high-frequency band of 2,000 Hz or more, and it is better to manufacture a thickness of 2.50 and 2.0×2.0 cm².

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.25-26
• /
• 2023

The internal core material and external color of a sandwich panel have a significant impact on the performance of the sandwich panel. For use on roofs and walls, the internal core material and external color must be considered. Therefore, the surface and back side temperatures were measured for each exterior color and inner core material type. For the internal core materials, urethane foam and Expanded Poly Styrene(EPS), which are core materials mainly used in sandwich panels, were selected. As colors, black and ivory were selected according to brightness, and a total of five colors were selected: red, blue, and green, which are the three primary colors of light. As a result, there were differences in surface and temperature depending on the external color and type of internal core material. Regardless of the color, the temperature was measured lower for panels with urethane foam than for panels with an internal core of EPS. This is believed to have been influenced by the difference in thermal conductivity of urethane foam being 0.023W/(m·K) and that of EPS being 0.032W/(m·K). In addition, panels with a black exterior color were found to have higher surface and back temperatures than panels of other colors, and ivory-colored panels had lower back temperatures regardless of the core material. This is proportional to the brightness and light-absorbing characteristics.