• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.539-546
• /
• 1999

Absorbent polymer-cement composites were fabricated by the semi-powder mixing OPC(ordinary Portland cement) with an absorbent polymer. The effects of absorbent polymer on the mechanical properties and the hydration characteristics were observed and the polymer-cement interaction also discussed. Absorbent polymer-cement composites showed the value of total porosity of 8vol% the value of 28 days flexural strength was up to 280 Kgf/cm2 in the case of absorbent polymer-cement composite at 1 wt% absorbent polymer content and microstructure of absorbent polymer-cement composite has been observed more dense than that of OPC paste. Accordingly the permeability of compositewas improved and so the moisture resistance was also increased. Adding polymer did not retard the hydration of OPC. It was considered from the results of IR(infrared) analysis that the functional group of absorbent polymer would be changed from unidentate to bidentate during by the hydration of cement minerals.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.185-191
• /
• 2014

In this paper, absorption and reaction characteristics of low $CO_2$ and alkanolamines were investigated. As MEA concentrations increase 1, 2 and 3 wt%, $CO_2$ loadings decrease 0.34 mol-$CO_2/mol$-absorbent, 0.32 mol-$CO_2/mol$-absorbent and 0.3 mol-$CO_2/mol$-absorbent, respectively. Also, $CO_2$ loadings decrease from 0.32 mol-$CO_2/mol$-absorbent, 0.30 mol-$CO_2/mol$-absorbent and 0.28 mol-$CO_2/mol$-absorbent as AMP concentrations increase 1, 2 and 3 wt%. Experimental results with blending solutions show that $CO_2$ loading was the highest, 0.52 mol-$CO_2/mol$-absorbent, when 0.5 wt% MEA and 0.5 wt% AMP were blended.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.195-199
• /
• 2010

The reversible chemical absorption using MEA (monoethanolamine), one of alkanolamine, is generally used as a conventionally method for $CO_{2}$ capture. Even MEA absorbent has excellent reactivity with $CO_{2}$, it has been known to have the decrease of absorption capacity caused by $CO_{2}$, $O_{2}$ or other acid gases in flue gas, corrosion and thermal degradation. In this study, MEA solutions degraded in the steam reforming process of refinery used and the absorption performance were compared for the used of conventional MEA solution. In case of 30 wt% MEA and mixture of 20 wt% thermal degraded absorbent (DP) and 10 wt% PZ, the absorption capacities were $0.5365mol-CO_{2}$/mol-absorbent and $0.5939mol-CO_{2}$/mol-absorbent respectively. PZ added thermally degraded absorbent showed the enhanced absorption capacity. On the contrary, the absorption rates were $1.1610kg_{f}/cm^2{\cdot}min$ for 30 wt% MEA, $0.5310kg_{f}/cm^2{\cdot}min$ for mixture of 20 wt% thermal degraded absorbent (DP) and 10 wt% PZ and $0.3525kg_{f}/cm^2{\cdot}min$ for 30 wt% thermally degraded absorbent only. The absorption rates of PZ added thermally degraded absorbent was higher than that of thermally degraded absorbent only. Therefore, it can be confirmed that thermally degraded absorbent can be reused as an absorbent for $CO_{2}$ by the addition of suitable additives.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.39-44
• /
• 1998

An experimental study on oil absorbent was conducted to investigate the feasibility of utilizing absorbents in oil separation from water-oil mixture for spilt oil recovery. Experiments included investigations of absorptivity and filtering performance of a commercial oil absorbent for different diesel oil concentrations. The measured average absorptivity of the absorbent was above 92% for oil concentrations, 5, 10, 15vo1%, that shows good absorbing performance. Filtering the oil-water mixture, however, was too slow to be used for oil separation. An absorbent baffle system was suggested for oil separation which collects oil panicles by increasing contact between the absorbent and oil particles.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.217-218
• /
• 2023

This study is to develop porous concrete using super absorbent polymer, which possesses insolubility and high absorption capacity, as a substitute material for lightweight soil. Various mixtures were prepared using aggregates, cement, mixing water, and super absorbent polymer, and the absorption ratio and compressive strength were examined for each mixture. As the amount of super absorbent polymer added increased, the absorption ratio also increased, reaching up to 35-105%. However, the compressive strength decreased by 49.5% to 65.3%. This is believed to be due to the inherent properties of super absorbent polymer, which led to an increase in the absorption ratio but, in turn, reduced the binding strength of cement paste particles, resulting in a decrease in compressive strength.

• Food Science and Preservation
• /
• v.5 no.4
• /
• pp.363-367
• /
• 1998

Kimchi attached gas-absorbent and unattached one were stored at 20$^{\circ}C$, examined for the storage effects by measuring changes of pH, acidity, CO$_2$ contents, total microbe and lactic acid bacteria. pH of kimchi attached KOH is higher than that of the others during storage. Acidity of kimchi attached KOH is lower than that of the others during storage. The CO$_2$ contents of kimchi used KOH as Bas-absorbent is 1.5 mg% at 6 days, after it's value is constant during storage. And the CO$_2$ content of kimchi attached gas-absorbent is lower than that of kimchi unattached gas-absorbent. Total microbe number of kimchi unattached gas-absorbent, treated Ca(OH)$_2$ and treated KOH are the highest value at 6, 6 and 8 days, respectively. Lactic acid bacteria number of kimchi is increased during storage and that of kimchi attached gas-absorbent is higher than that of kimchi unattached gas-absorbent.

• The Research Journal of the Costume Culture
• /
• v.11 no.1
• /
• pp.66-74
• /
• 2003

This study is to improve the worst lightfastness of a natural dye. To modify the fiber surface, low temperature oxygen plasma was carried out on silk fabric. The result is followed below after the examination of surface shape, dyeability, color change, UV absorbent influence and lightfastness. 1. When electric discharge outputs are 60W, 80W and 100w, and processing times are 10minutes, 20minutes and 40minutes, the etching effect of surface increased as electric discharge outputs and processing times increased. 2. When examined UV absorbent for 5hours, 10hours, 20hours, 40hours and 80hours, the value changes of E are 1.47, 2.51, 2.91, 3.71, 4.51 and 5.31 in case of Al pre-mordanting/ prasma 80W, 20min./ UVabsorbent 5% (100:1), 2.31, 2.47, 3.84, 3.90, 3.61 and 4.42 in case of Al pre-mordanting/prasma 80W, 20min.1 UV absorbent 5% (o.w.f.). The lightfastness decreased when UV absorbent increased. 3. Dyeability of the samples pre-treated with five different methods was in the following order: plasma processing for 20minutes at 60W/Al pre-mordanting > Al pre-mordanting > plasma processing for 20minutes at 60W > Al after-mordanting. non mordanting Plasma treatment had superior effect on dyeability. 4. When UV absorbent was applied in fabric, the sample under higher electric discharge out puts showed more effective in improving lightfastness.

• Journal of applied mathematics & informatics
• /
• v.32 no.3_4
• /
• pp.323-330
• /
• 2014

The notion of transitive filters is introduced in lattice implication algebras. A necessary and sufficient condition is derived for every filter to become a transitive filter. Some sufficient conditions are also derived for a filter to become a transitive filter. The concept of absorbent filters is introduced and their properties are studied. A set of equivalent conditions is obtained for a filter to become an absorbent filter.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.297-303
• /
• 2020

The reaction of carbon dioxide with the amine-based absorbents which have various substituents in the molecule was described. In the case of MEA which is a representative primary amine, the absorption reaction was proceeded very fast while the regeneration reaction was took place slowly due to the strong bond strength between the absorbent and carbon dioxide. The more substituents on N atom of the absorbent, the slower the absorption reaction between carbon dioxide and the absorbent, which in turn causes faster the regeneration rate from the reaction intermediate, carbamate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.909-918
• /
• 1999

The indigo-dyed blue denim garments are favored not only by young people but also by almost everyone of life, In the early years they were casually worn on most occasions but became universal recently. Such denim garments are treated with various process to give it optimal softness and color contrast of blue and white. The processess can generate photoyellowing and thus the yellowing may damage their appearance and quality. So this study is to find the solutions to reduce the photoyellowing problem. For this prupose sample denim were treated with cellulase fluorescent brightener UV absorbent etc. The results were as follows; The yellowing would be more accelerated by fluorescent brightening. Since the yellowing was reduced by 90% In particular the application of the UV absorbent before using of the fluorescent brightener was most effective. The optimal concentration was 0.5% (o.w.f) and the benzophenone compounds were found most effective for the indigo denim. And reduction effect of yellowing by UV absorbent was lowered with repeated laundering but metal compound treatment on fabric made a removal of UV absorbent by laundering prevented.