• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.115-120
• /
• 2009

The 3wt.% Al-doped zinc oxide (AZO) thin films were fabricated on Coming 1737 substrates at a fixed oxygen pressure of 200 mTorr with various substrate temperatures ($100\;{\sim}\;250^{\circ}C$) by using pulsed laser deposition in order to investigate the microstructure, optical, and electrical properties of AZO thin films. All thin films were shown to be c-axis oriented, exhibiting only a (002) diffraction peak. The AZO thin film, fabricated at 200 mTorr and $250^{\circ}C$, showed the highest (002) orientation and the full width at half maximum (FWHM) of the (002) diffraction peak was $0.44^{\circ}$. The optical transmittance in the visible region was higher than 85 %. The Burstein-Moss effect, which shifts to a high photon energy, was observed. The electrical property indicated that the highest carrier concentration ($3.48{\times}10^{20}cm^{-3}$) and the lowest resistivity ($1.65{\times}10^{-2}{\Omega}cm$) were obtained in the AZO thin film fabricated at 200 mTorr and $250^{\circ}C$.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.145-148
• /
• 2016

This paper, Al-doped ZnO(AZO) thin films for application as transparent conducting oxide films were deposited on the Corning glass substrate by using RF magnetron sputtering system. The effects of various Argon gas flow rates on optical and electrical characteristics of AZO films were investigate sputtering method. The Carrier Concentration is enhanced as Ar gas rate increases, and also the oxygen vacancy concentration. The figure of merit obtained in this study means that AZO films which deposited Ar gas rate of 75 sccm have the highest Carrier concentration and Hall mobility, which have the highest photoelectrical performance that it could be used as transparent electrodes.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.57-60
• /
• 2009

Transparent electrode ZnO:Al(AZO)films were deposited on a PES (polyethersulfone) polymer substrate for thin film solar cells applications. A PES substrate with a thickness of 0.2mm and transmittance > 90% in the visible range was used because it is light weight and can deform easily. AZO thin films were prepared at a fixed DC power, $PO_2\;=\;P(O_2)/[P(O_2)\;+\;P(Ar)]$, and various substrate temperatures. The properties of AZO thin films were examined by X-ray diffraction, UV/VIS spectroscopy, four-point probe, Hall measurements, and field emission scanning electron microscopy. The lowest resistivity of all the films was $4.493\;{\times}\;10^{-4}\;[\Omega-cm]$ and the transmittance was > 80% in the visible range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.169-169
• /
• 2016

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.2
• /
• pp.116-125
• /
• 2018

Aluminum-doped zinc oxide (AZO) is a commonly used material for the front contact layer of chalcopyrite $CuInGaSe_2$ (CIGS) based thin film solar cells since it satisfies the requisite optical and electrical properties with low cost and abundant elemental availability. Low-resistivity and high-transmission front contacts have been developed for high-performance CIGS solar cells, and nearly meet the required performance. However, the durability of the cell especially for the corrosion resistance of AZO films has not been studied intensively. In this work, AZO films were prepared on Corning glass 7059 substrates by radio frequency magnetron sputtering depending on the hydrogen content. The electrical and optical properties and electrochemical corrosion resistance of the AZO films were evaluated as a function of the hydrogen content. With increasing hydrogen content to 6 wt%, the crystallinity, crystal size, and surface roughness of the films increased, and the resistivity decreased with increased carrier concentration, Hall mobility, oxygen vacancies, and $Zn(OH)_2$ binding on the AZO surface. At a hydrogen content of 6 wt%, the corrosion resistance was also relatively high with less columnar morphology, shallow pore channels, and lower grain boundary angles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.331-331
• /
• 2008

Transparent conductive oxide (TCO) are necessary as front electrode or anti-reflecting coating for increasing efficiency of LED and Photodiode. In this paper, aluminum-doped Zinc oxide films(AZO) were prepared by RF magnetron sputtering on Si substrate at room temperature with application of substrate bias from -60 to 60 V. Then annealed at temperature of 200, 300 and $400^{\circ}C$ for 1hr in $H_2$ ambient. Structural and electrical property of AZO thin films were investigated.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2012

Al doped ZnO (AZO) thin film was deposited by using Facing Target Sputtering (FTS) system. This work examined the properties of AZO thin film as a function of the substrate temperature. The sputtering targets were 4 inch diameter disks of AZO (ZnO : $Al_2O_3$ = 98 : 2 wt.% ). The properties of electrical, structural and optical were investigated by 4-point probe, Hall effect measurement, x-ray diffractometer (XRD), field-emitting scanning electron microscopy (FE-SEM), and UV/VIS spectrometer. The lowest resistivity of films was $5.67{\times}10^{-4}{\Omega}.cm$ and the average optical transmittance of the films was above 85% in the visible range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1542-1545
• /
• 2005

Transparent conducting aluminum-doped zinc oxide (AZO) thin films have been deposited on corning 1737 glass by DC magnetron sputter. The structural, electrical and optical properties of the films were investigated as a function of various substrate temperatures. AZO thin films were fabricated by dc magnetron sputtering with AZO ceramic target $(Al_2O_3: 2wt %)$. The obtained films were poly crystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The lowest resistivity is $6.0{\times}10^{-4}$ Ocm with the carrier concentration of $2.694{\times}10^{20}\;cm^{-3}$ and Hall mobility of $20.426cm^2/Vs$. The average transmittance in the visible range was above 90%.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1149-1150
• /
• 2015

In this study, hafnium was doped into aluminum zinc oxide (AZO) films were deposited on glass and Si substrates at room temperature via co-sputtering by varying the electric power applied to the Hf target. The properties of deposited Hf-doped AZO films, such as crystalline structure, optical transmittance, and band gap were analyzed using various methods such as X-ray diffraction (XRD) and UV/visible spectrophotometer. The experimental results confirmed that the abovementioned properties of Hf-AZO films strongly depended on the Hf sputtering power.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.480-492
• /
• 1996

AZO (Aluminum doped Zinc Oxide) transparent conducting thin films were fabricated by reactive DC mangnetron sputtering method using zinc target containing 2 wt% of Al. Transition range with optimum transmittance and conductivity was obtained by contrlling partial pressure of reactive oxygen gas. Sputtering condition for this transition range could be kept stable by regulating the target voltage. According to XRD analysis, there was only one peak for (002) plane in AZO films and the films deposited in transition range.