• 한국전자통신학회논문지
• /
• 제16권6호
• /
• pp.1089-1094
• /
• 2021

재난 및 재해에 의해 파손 또는 기능이 훼손된 항만인프라 시설의 복구와 시공작업 작업을 지원하기 위하여 항만 내 정기순시, 수중환경 모니터링, 항만 내 수중 형상정보 취득 등의 임무수행을 기반으로 작업장비와 연계, 시공지원이 가능한 AUV 플랫폼 분석과 설계에 관련한 내용을 정의한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.451-458
• /
• 2012

수중의 작업 목적에 따라 ROV와 AUV의 두 가지 용도로 사용할 수 있는 새로운 구조의 변신 6자유도 수중로봇의 설계연구를 하였다. CROV의 ROV모드와 AUV모드에 대한 각각의 구조 설계연구를 수행하였으며 각각의 모드에 대한 제어시스템을 설계하고 AUV의 경우에는 추력에 따른 항해속도에 대한 해석을 수행하였다. ROV나 AUV의 정확한 위치 및 속도를 추정할 수 있도록 다양한 센서신호를 퓨전하여 처리하는 센서퓨전보드를 제작하고 확장 칼만필터를 포함하는 전체 제어시스템을 설계하고 제작하였다.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.797-804
• /
• 2013

In this paper, a study of a new hovering six dof underwater robot with redundant horizontal thrusters, titled HAUV (hovering AUV), is presented. The results of study on the structure design, deployment of thrusters, and development of the developed control system of the AUV was presented. For the HAUV structure, a structure design and an analysis of the thrusting system was performed. For navigation, a sensor fusion board which can proceed various sensor signals to identify correct positions and speeds was developed and a total control system including EKF (Extended Kalman Filter) was designed. Rolling, pitching and depth control tests of the HAUV have been performed, and relatively small angle error and depth tracking error results were shown.

• 대한임베디드공학회논문지
• /
• 제10권4호
• /
• pp.257-264
• /
• 2015

For the tracking of the way-points of hovering AUV (HAUV), we suggest a simple PID controller. The way-points are designed to approach to a virtual underwater structure and the heading angles at each way-point are set to look at the structure in the face. The proposed controller consists of a vertical controller to maintain the depth and pitch angle, and a horizontal controller to move to the desired position as well as to adjust the heading angle of the HAUV. In the simulation using Matlab/Simulink, the HAUV with the proposed PID controller is shown to track all the way-points within 1 m range while maintaining proper heading angle at each way-point.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1791-1796
• /
• 2004

Recently, great improvements have been made in developing autonomous underwater vehicles (AUVs) using stateof- the-art technologies for various kinds of sophisticated underwater missions. To meet increasing demands posed on AUVs, a powerful on-board computer system and an accurate sensor system with an well-organized control system architecture are needed. In this paper, a new control system architecture is proposed for AUV, ORCA (Oceanic Reinforced Cruising Agent) which is being currently developed by Korea Research Institute of Ships and Ocean Engineering (KRISO). The proposed architecture uses a hybrid architecture that combines a hierarchical architecture and a behavior based control architecture with an evaluator for coordinating between the architectures. This paper also proposed a sensor fusion structure based on the definition of 4 categories of sensors called grouping and 5-step data processing procedure. The development of the AUV, ORCA involving the system architecture, vehicle layout, and hardware configuration of on-board system are described.

• Ocean Systems Engineering
• /
• 제4권1호
• /
• pp.1-19
• /
• 2014

Hydrodynamic coefficients strongly affect the dynamic performance of autonomous underwater vehicles (AUVs). A novel kind of underwater vehicle (Heavier-than-water AUV) with higher density than water is presented, which is different from conventional ones. RANS method and overlapping grids are used to simulate the flow field around the vehicle. Lifts, drags and moments of different attack and drift angles in steady state are calculated. The hydrodynamic performances and how the forces change with the attitude are analyzed according to the flow field structure. The steady-state results using overlapping grid method are compared with those of software FLUENT and wind tunnel tests. The calculation results show that the overlapping grid method can well simulate the viscous flow field around the underwater vehicle. Overlapping grid skills have also been used to figure out the planar-motion-mechanism (PMM) problem of Heavier-than-water AUV and forecast its hydrodynamic performance, verifying its effectiveness in dealing with the dynamic problems, which would be quite helpful for design and control of Heavier-than-water AUV and other underwater vehicles.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.679-687
• /
• 2019

This paper presents the autonomous swimming technology developed for an Autonomous Underwater Vehicle (AUV) operating in the underwater jacket structure environment. To prevent the position divergence of the inertial navigation system constructed for the primary navigation solution for the vehicle, we've developed kinds of marker-recognition based underwater localization methods using both of optical and acoustic cameras. However, these two methods all require the artificial markers to be located near to the cameras mounted on the vehicle. Therefore, in the case of the vehicle far away from the structure where the markers are usually mounted on, we may need alternative position-aiding solution to guarantee the navigation accuracy. For this purpose, we develop a sonar image processing based underwater localization method using a Forward Looking Sonar (FLS) mounted in front of the vehicle. The primary purpose of this FLS is to detect the obstacles in front of the vehicle. According to the detected obstacle(s), we apply an Occupancy Grid Map (OGM) based path planning algorithm to derive an obstacle collision-free reference path. Experimental studies are carried out in the water tank and also in the Pohang Yeongilman port sea environment to demonstrate the effectiveness of the proposed autonomous swimming technology.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.406-413
• /
• 2007

This paper proposes a self-recurrent wavelet neural network(SRWNN) based adaptive backstepping control technique for the robust steering control of autonomous underwater vehicles(AUVs) with unknown model uncertainties and external disturbance. The SRWNN, which has the properties such as fast convergence and simple structure, is used as the uncertainty observer of the steering model of AUV. The adaptation laws for the weights of SRWNN and reconstruction error compensator are induced from the Lyapunov stability theorem, which are used for the on-line control of AUV. Finally, simulation results for steering control of an AUV with unknown model uncertainties and external disturbance are included to illustrate the effectiveness of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.227-237
• /
• 1997

Autonomous Underwater Vehicles(AUVs) have become an important tool for various purposes in subsea: inspection, recovery, construction, etc., and the development of autonomous control system is luglay desirable- thete zffe many problems associated with designing the control system for AUV due to unknown underwater envimn-Tnent, the possibility of subsystem failures, and unpredictable changes in the dynamics of the vehicle. In this paper, an autonomous control system based on the intelligent control theory to enhance operation efficiency of the ALTV is presented. The control system has a hierarchical structure which consists of mission planning level, mission control level, navigation level, and execution level. The performance of the control system is investigated by computer simulation. The results show that the proposed control system can be applied successfully to the AUV in spite of the possibility of failures in the vehicle and the collision hazard in the sea environment.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.169-179
• /
• 1997

This paper presents a discrete-time sliding mode control of an autonomous underwater vehicle with parameter uncertainties and long sample interval based on discrete variable structure system. Although conventional sliding mode montrol techniques are robust to system uncertainties, in the case of the system with long sample interval, the sliding control system reveals chattering phenomenon and even makes the system unstable. This paper considers the AUV which acquires position informations from a surface ship through an acoustic telemetry system with a certain discrete interval. The control system is designed on the basis of a Lyapunov function and a sufficient condition of the switching gain to make the system stable is give. Each component of the switching gain can be determined separately one another. The controller is robust to the uncertainties, and reaching condition of the control system is satisfied for any initial condition. This control law is a generalized form of the discrete sliding mode control and reduce the chattering problem considerably. Motion control of the AUV in the vertical plane shows the effectiveness of the proposed technique.