• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.155-163
• /
• 2010

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on-board the NASA's Terra spacecraft provides along-track digital stereo image data at 15m resolution with a base-height ratio 0.6. Automated stereocorrelation procedure was implemented using the ENVI 4.1 software to derive DEMs with $15m{\times}15m$ in 43km long and 50km wide area using the ASTER stereo images. The accuracy of DEMs was analyzed in comparison with those which were obtained from digital topographic maps of 1:25,000 scale. Results indicate that RMSE in elevation between ${\pm}7$ and ${\pm}20m$ could be achieved. Excluding cloud, water and building areas as the factors which make RMSE value exceeding 10m, the accuracy of DEMs showed RMSE of ${\pm}5.789m$. Therefore for the purpose of elevating accuracy of topographic information, we intended to detect the cloud areas and shadow areas by a landcover classification method, remove those areas on the ASTER DEM and then replace with those areas detached from the cartographic DEM by band math.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.23-32
• /
• 2016

This study evaluates landslide susceptibility using statistical analysis by SVM (support vector machine) and the illite index of clay minerals extracted from ASTER(advanced spaceborne thermal emission and reflection radiometer) imagery which can be use to create mineralogical mapping. Landslide locations in the study area were identified from aerial photographs and field surveys. A GIS spatial database was compiled containing topographic maps (slope, aspect, curvature, distance to stream, and distance to road), maps of soil properties (thickness, material, topography, and drainage), maps of timber properties (diameter, age, and density), and an ASTER satellite imagery (illite index). The landslide susceptibility map was constructed through factor correlation using SVM to analyze the spatial database. Comparison of area under the curve values showed that using the illite index model provided landslide susceptibility maps that were 76.46% accurate, which compared favorably with 74.09% accuracy achieved without them.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.133-143
• /
• 2012

The purpose of this study is to investigate the characteristics of urban heat island considering urban space at nighttime. We used to analyze landuse and landcover data of 1:1,000 scale, DTM, and surface temperature extracted ASTER image satellite of nighttime. According to the analytical results, heat intensity in single-family residential is higher than that in industrial area, public facility area, and commercial area because the anthropogenic heat by energy consumption is released. Likewise, the temperature difference were big in the buildings of industrial area depending on operating hours. Meanwhile, green and river area had cooling impacts mitigating the urban heat island. Therefore, we have to mitigate heat intensity through constructing green space and waterfront area. As mentioned above, we think that the results of this study will be used as base data for effective spatial planning when formulating development planning to mitigate urban heat island at nighttime.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.240-245
• /
• 2006

오늘날 도시인구집중화 현상에 따른 대규모 도시개발과 도시역의 확대로 지표면의 피복 변화가 극심하게 이루어지고 있는 한편 이러한 현상으로 인해 도시의 내 외적 경관변화 뿐만 아니라 지형 및 기온상승, 바람장의 변화 등 복합적인 국지기후 변화를 초래하게 되었다. 본 연구에서는 이러한 도시의 기후 변화에 따라 청계천 복원 전의 도시 지표 열 환경 특성을 분석을 수행하고자 한다 도시지역의 열환경 분석을 위하여 기존에는 주로 Landsat TM/ETM+ 위성영상 자료를 사용하였으나 2003년 5월 위성 센서의 고장으로 위성영상 자료의 사용이 불가피하게 되었다. 이에 대체 방안으로 ASTER 영상 열적외 센서에서 취득한 지표온도 값과 현장에서 취득한 AWS자료와의 상관성 분석을 실시하였으며, 이를 기반으로 청계천 주변의 근접성 분석 및 토지이용별 지표온도 분포 패턴 등 도시 열 환경 변화 탐지 및 분석을 위하여 GIS 및 RS 분석을 실시하였다.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.454-454
• /
• 2006

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.77-83
• /
• 2008

In this study, land cover classification and NDVI evaluation for hazard mitigation precaution are carried out in surrounding areas of Yeongi-gun, Chungcheongnam-do ($132\;km^2$) where a project for multi-functional administrative city is promoted by government. Image acquired from KOMPSAT 2, LANDSAT and ASTER is utilized and comparative evaluation on limitation in classification based on resolution was carried out. The area mainly consists of arable land including mountains, rice fields, ordinary fields, etc thus special attention was paid to the classification of rice fields and ordinary fields. For the classification of image acquired from KOMPSAT 2, segmentation technique for classification of high-resolution image was applied. To evaluate the accuracy of the classification, field investigation was conducted to examine the sample and it was compared with the land usage and classification of land category in land ledger of Korea. Acquired results were made into theme map in shape file format and it would be of great help in decision making of policy for the future-oriented development plan of multi-functional administrative city.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.717-720
• /
• 2005

Recently as large sized urban development and the city ward drifting of population are caused, the urban surface temperature is raised very seriously and rapidly. These artificial developments have destroyed the inner and outer landscapes such as topography and have changed complex local climate such as a sudden rise in temperature, the change of wind field and air pollution. In order to clarify this problem visually, the studies on extracting the thermal infrared and the characteristic analysis of local climate in urban area had been performed by using the sixth band of Landsat TM and ETM+. However, there is a need to alternate Landsat TM and ETM+ because these satellite images are not applied any more. Therefore, in this paper it is proposed to use 2 Aster image (2004.4.17 daily 2b03, 2004.10.10 night 2b03) of EOS AM and to extract the surface temperature. Also, the pattern of surface temperature in urban area and the application possibility in local climate study are proposed by verifying the correlation with A WS data. Also, IKONOS image was used to figure out the artificial development area in visual.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.81-88
• /
• 2015

Various satellite sensors having ranges of the visible, infrared, and thermal wavelengths have been launched due to the improvement of hardware technologies of satellite sensors development. According to the development of satellite sensors with various wavelength ranges, the fusion and integration of multisensor images are proceeded. Image matching process is an essential step for the application of multisensor images. Some algorithms, such as SIFT and SURF, have been proposed to co-register satellite images. However, when the existing algorithms are applied to extract matching points between optical and thermal images, high accuracy of co-registration might not be guaranteed because these images have difference spectral and spatial characteristics. In this paper, location of control points in a reference image is extracted by SURF, and then, location of their corresponding pairs is estimated from the correlation of the local similarity. In the case of local similarity, phase correlation method, which is based on fourier transformation, is applied. In the experiments by simulated, Landsat-8, and ASTER datasets, the proposed algorithm could extract reliable matching points compared to the existing SURF-based method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.144-158
• /
• 2012

A higher spatial resolution is preferable to support the accuracy of detailed climate analysis in urban areas. Airborne LiDAR (Light Detection And Ranging) and satellite (KOMPSAT-2, Korea Multi-Purpose Satellite-2) images at 1 to 4 m resolution were utilized to produce digital elevation and building surface models as well as land cover maps at very high(5m) resolution. The Climate Analysis Seoul(CAS) was used to calculate the fractional coverage of land cover classes in built-up areas and thermal capacity of the buildings from their areal volumes. It then produced analyzed maps of local-scale temperature based on the old and new input data. For the verification of the accuracy improvement by the precise input data, the analyzed maps were compared to the surface temperature derived from the ASTER satellite image and to the ground observation at our detailed study region. After the enhancement, the ASTER temperature was highly correlated with the analyzed temperature at building (BS) areas (R=0.76) whereas there observed no correlation with the old input data. The difference of the air temperature deviation was reduced from 1.27 to 0.70K by the enhancement. The enhanced precision of the input data yielded reasonable and more accurate local-scale temperature analysis based on realistic surface models in built-up areas. The improved analysis tools can help urban planners evaluating their design scenarios to be prepared for the urban climate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.519-528
• /
• 2012

It was pointed out that the terrain distortion of SAR image is even worse than that of optical image although SAR imagery has the advantages of being independent of solar illumination and weather conditions. It is thus necessary to correct terrain distortion in SAR image for various application areas to integrate SAR and optical image information. There has to be a clear evaluation of terrain correction of high resolution SAR image according to the quality of DEM because the DEM of study site is generally used in the process of terrain correction. To achieve this issue, this paper compared the effects of quality of Digital Elevation Model(DEM) in the process of terrain correction of high resolution SAR images, using the DEM produced from 1:5000 topographic contour maps, LiDAR DEM, ASTER GDEM, SRTM DEM. We used TerraSAR-X and Cosmo-SkyMed, as the test data set, which are constructed on the same X-band SAR system as KOMPSAT-5. In order to evaluate quantitatively the correction results, we conducted comparative evaluation with the KOMPSAT-2 ortho image of the same region. The evaluation results showed that the DEM produced from 1:5000 topographic contour maps achieved successful results in the terrain correction of SAR image compared with the other DEM data, and the widely used SRTM DEM data in various applications was not suitable for the terrain correction of high resolution SAR images.