• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.15-22
• /
• 2000

The analysis of power spectrum based on linear AR model is applied widely to quantize the response of autonomic nerve noninvasively, In this paper, we estimate the power spectrum density for heartrate variability of the electrocadiogram and pulse wave for short term data(less than two minute), The time series of heart rate variability is obtained from the time interval(RRI, PPI) between the feature point of the electrocadiogram and pulse wave for normal person, The generated time series reconstructed into new time series through polynomial interpolation to apply to the AR mode. The power spectrum density for AR model is calculated by Burg algorithm, After applying AR model, the power spectrum density for heart rate variability of the electrocadiogram and the pulse wave is shown smooth spectrum power at the region of low frequence and high frequence, and that the power spectrum density of electrocadiogram and pulse wave has similar form for same subject.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.713-719
• /
• 2009

In this paper, we develope a water demand forecasting algorithm using AR(Auto-regressive) and MLP(Multi-layer perceptron). To show effectiveness of the proposed method, we analyzed characteristics of time-series data collected in "A" purification plant at Jeon-Buk province during 2007-2008, and then performed the proposed method with various input factors selected through various analyses. As noted in experimental results, the performance of three types model such as multi-regressive, AR(Auto-regressive), and AR+MLP(Auto-regressive + Multi-layer perceptron) show 5.1%, 3.8%, and 3.6% with respect to MAPE(Mean Absolute Percentage Error), respectively. Thus, it is noted that the proposed method can be used to predict short-term water demand for the efficient operation of a water purification plant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.181-189
• /
• 2021

In order to increase the practical usability of the virtual reality(VR)-based BIM object in the construction site, the difference between the virtual image and the real image should be resolved, and when it is applied to the construction schedule management function, it is necessary to reduce the image gap between the virtual completion and the actual completion. In this study, in order to solve this problem, a prototype of 4D model is developed in which augmented reality (AR) and 3D printing technologies are linked, and the practical usability of a 4D model linked with two technologies is verified. When a schedule simulation is implemented by combining a three-dimensional output and an AR object, it is possible to provide more intuitive information as a tangible image-based schedule information when compared to a simple VR-based 4D model. In this study, a methodology and system development of an AR implementation system in which subsequent activities are simulated in 4D model using markers on 3D printing outputs are attempted.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.69-73
• /
• 1996

Tool wear monitoring is very important aspect in metal cutting because tool wear effects quarity and precision of workpiece, tool life etc. In this study we detected force signal through tool dynamometer in turning and using it we conducted 6th AR modeling and fractal analysis. Finally the back-propagation model of the neural network is utilized to monitor tool wear and features are extracted through AR model and fractal analysis.

• Journal of Internet of Things and Convergence
• /
• v.7 no.4
• /
• pp.23-28
• /
• 2021

Through the 4^th industrial revolution, it is rapidly developing in various fields such as artificial intelligence, AR/VR, and big data, and software is at the center. In the field of education as well, the importance of integrated education to support the development of technology is being emphasized, and in order to compete in software technology, securing human resources for software development should be prioritize in domestic. However, unlike the hardware-centric society of the past, the role of software technology human resources is very important, and the reality is that they are discharging human resources that are far from the human resources image that companies need. In this paper, present an immersed education model for training AR software professionals, and based on this, propose an evaluation index that can grasp the quality of the program of the immersed AR education model. Through the AR education model, it is expected that the weaknesses and strengths of the model can be identified, and it can contribute to setting the direction for improvement of the education program.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.48-55
• /
• 2003

Hidden Markov Model(HMM) has a doubly embedded stochastic process with an underlying stochastic process that can be observed through another set of stochastic processes. This structure of HMM is useful for modeling vector sequence that doesn't look like a stochastic process but has a hidden stochastic process. So, HMM approach has become popular in various areas in last decade. The increasing popularity of HMM is based on two facts : rich mathematical structure and proven accuracy on critical application. In this paper, we applied continuous HMM (CHMM) approach with AR coefficient to detect and predict the chatter of lathe bite and to diagnose the wear of oil Journal bearing using rotor shaft displacement. Our examples show that CHMM approach is very efficient method for machine health monitoring and prediction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.249-256
• /
• 2022

Various studies are being actively conducted to show that the real-time visualization technology that combines BIM (Building Information Modeling) and AR (Augmented Reality) helps to increase construction management decision-making and processing efficiency. However, when large-capacity BIM data is projected into AR, there are various limitations such as data transmission and connection problems and the image cut-off issue. To improve the high efficiency of visualizing, a mesh optimization algorithm based on the k-nearest neighbors (KNN) classification framework to reconstruct BIM data is proposed in place of existing mesh optimization methods that are complicated and cannot adequately handle meshes with numerous boundaries of the 3D models. In the proposed algorithm, our target BIM model is optimized with the Unity C# code based on triangle centroid concepts and classified using the KNN. As a result, the algorithm can check the number of mesh vertices and triangles before and after optimization of the entire model and each structure. In addition, it is able to optimize the mesh vertices of the original model by approximately 56 % and the triangles by about 42 %. Moreover, compared to the original model, the optimized model shows no visual differences in the model elements and information, meaning that high-performance visualization can be expected when using AR devices.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2954-2972
• /
• 1998

It is expected that the transport of compressed video will become a significant part of total network traffic because of the widespread introduction of multimedial services such as VOD(video on demand). Accordingly, VBR(variable bit-rate) encoded video will be widely used, due to its advantages in statistical multiplexing gain and consistent vido quality. Since the transport of video traffic requires larger bandwidth than that of voice and data, the characterization of video source and traffic modeling is very important for the design of proper resource allocation scheme in ATM networks. Suitable statistical source models are also required to analyze performance metrics such as packet loss, delay and jitter. In this paper, we analyzed and described on the characterization and traffic modeling of MPEG video sources. The models are broadly classified into two categories; i.e., statistical models and deterministic models. In statistical models, the models are categorized into five groups: AR(autoregressive), Markov, composite Marko and AR, TES, and selfsimilar models. In deterministic models, the models are categorized into $({\sigma},\;{\rho}$, parameterized model, D-BIND, and Empirical Envelopes models. Each model was analyzed for its characteristics along with corresponding advantages and shortcomings, and we made comparisons on the complexity of each model.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.8-12
• /
• 2010

In this paper, we studied on AR model order decision for extraction of EMG median frequency by t-test and ANOVA and comparison of median frequency. And we extracted well-known parameters such as zero crossing rate(ZCR), low band energy(Band) and median frequency(MDF) from surface electromyogram (EMG). And we compared to evaluate themselves as measures for fatigue.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.177-186
• /
• 2016

Drought is a water-related natural disaster which can be simply described as spatially and temporally sequential absence of water. However, its characteristics are very difficult to define. For this reason, the preparation and mitigation from drought events have not been successful. In the current study, we illustrated a design drought estimation approach of water resources infrastructures as well as the existing theoretical one to prepare and mitigate drought disasters. Theoretical and simulation methods were tested including three time series models such as autoregressive (AR), Gamma AR, Copula AR models. The results indicated that for South Korea region, the simulation-based method to estimate drought frequency presented better performance and all the three time series models show similar performance to each other. The current drought event occurring in South Korea was investigated with dividing South Korea into four basins as Han River, Nakdong River, Geum River, and Nakdong River basins. The results showed that two middle and north basins presented significant drought events with 3 year drought duration and around 40 year return period while the other two southern regions illustrated relatively weaker drought events.