• IE interfaces
• /
• v.22 no.2
• /
• pp.104-115
• /
• 2009

The objective of the study is to evaluate the effectiveness of Crew Resource Management (CRM) training program for operators in the Main Control Room (MCR) simulator of APR-1400 Nuclear Power Plant. The experiments were conducted for two different crews of operators performing six different emergency operating scenarios during four-week period. Each crew consisted of the five operators: senior reactor operator, safety technical advisor, reactor operator, turbine operator, and electric operator. All crews (Crew A and B) participated in the training program for the technical knowledge and skills which were required to operate the simulator of the MCR during the first week. To verify the effectiveness of the CRM training program; however, only Crew A was selected to attend the CRM training after the technical knowledge and skills training. The results of the experiments showed that the CRM training program improved the individual attitudes of Crew A significantly. Team skills of Crew A were found to be significantly better than those of Crew B. The CRM training did not have positive effects on enhancing the individual performance of Crew A; however, as compared to that of Crew B. Implication of these findings was discussed further in detail.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.2
• /
• pp.140-145
• /
• 1995

This experiment was canied out to investigate the effect of seeding times on the fresh yield of fodder beet varieties, and to select the most adaptable varieties of fodder beet in Daekwanryeong areas. Three varieties(Kyros, Zorba and Hugin) and six seeding times(25 July, 4 Aug. and 14 Aug. in 1993. and 30 Apr., 10 May and 20 May in 1994) were combined in the experiment. The results obtained were as follows: 1. The seeding time for the highest fresh yield of fodder beet was obtained as 18.29 tonha on 25 July in 1993. Of various varieties, the highest fresh yields were 22.59 ton and 18.89 tonlha for Kyros and Zorba on 25 July, and 19.15 tonha for Hugin on 4 Aug. in 1993. 2. The fresh yield of fodder beet were 20.30 ton, 19.41 ton and 16.93 tonlha on 30 Apr., 10 May and 20 May in 1994, respectively. The highest fresh yield of the varieties were 77.78 ton for Kyms on 20 May, 19.79 ton for Zorba on 30 Apr., and 20.63 tonha for Hugin on 10 May in 1994. 3. Shoot and root(S/R) ratio was different between seedling times. S/R ratio of the varieties were increased in 1993 due to the delayed seeding times, but on the contrary it tended to decrease in 1994 with the delayed seeding times. 4. Shoot and root(S/R) ratios of varieties were 0.94, 0.89 and 1.18 for Kyros, Zorba and Hugin in 1993, and 1.29 for Kyms, and 1.85 for Zorba and Hugin in 1994, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.269-278
• /
• 2013

In this study, in order to examine the applicability of computational fluid dynamics with the porous model to the analysis of APR+ (Advanced Power Reactor Plus) internal flow, simulation was conducted with the commercial multi-purpose computational fluid dynamics software, ANSYS CFX V.14. In addition, among the various reactor internals, the effect of flow skirt geometry on reactor internal flow was investigated. It was concluded that the porous model for some reactor internal structures could adequately predict the hydraulic characteristics inside the reactor in a qualitative manner. If sufficient computation resource is available, the predicted core inlet flow distribution is expected to be more accurate, by considering the real geometry of the internal structures, especially located in the upstream of the core inlet. Finally, depending on the shape of the flow skirt, the flow distribution was somewhat different locally. The standard deviation of the mass flow rate (${\sigma}$) for the original shape of flow skirt was smaller, than that for the modified shape of flow skirt. This means that the original shape of the flow skirt may give a more uniform distribution of mass flow rate at the core inlet plane, which may be more desirable for the core cooling.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.187-194
• /
• 2011

Korea Nuclear Fuel is developing the X-GEN fuel which shows high performance and robust reliability for the worldwide supply. However, the simplified code systems such as CESEC-III which were developed in 1970s are still used in the current Non-LOCA safety analysis of OPR1000 and APR1400 plants. Therefore, it is essential to secure an advanced safety analysis methodology to make the best use of the merits of X-GEN fuel. To accomplish this purpose, the $\b{i}$ntegrated $\b{s}$afety $\b{a}$nalysis $\b{m}$ethodology (iSAM), is developed by selecting the best-estimate thermal-hydraulic code RETRAN. iSAM possesses remarkable advantages, such as generality, integrity, and designer-friendly features. That is, iSAM can be applied to both OPR1000 and APR1400 plants and uses only one computer code, RETRAN, in the whole scope of the non-LOCA safety analyses. Also the iSAM adopts the unique and automatic initialization and run tool, $\b{a}$utomatic $\b{s}$teady-$\b{s}$tate $\b{i}$nitialization and $\b{s}$afety analysis too l (ASSIST), to enable unhandy designers to use the new design code RETRAN without difficulty. In this paper, a brief overview of the iSAM is given, and the results of applying the iSAM to typical non-LOCA transients being checked during the reload design are reported. The typical non-LOCA transients selected are the single control element assembly withdrawal (SCEAW) accident, the asymmetric steam generator transients (ASGT), the locked rotor (LR) accident, and bank CEA withdrawal (BCEAW) event. Comparison to current licensing results shows a close resemblance; thus, it reveals that the iSAM can be applied to the non-LOCA safety analysis of OPR1000 and APR1400 plants.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.347-356
• /
• 2019

Bacillus sp. BS2 showing strong fibrinolytic activity was isolated from sea squirt (munggae) jeotgal, a traditional Korean fermented seafood. BS2 was identified as B. velezensis by molecular biological methods. B. velezensis BS2 grows well at 15% NaCl and at $10^{\circ}C$. When B. velezensis BS2 was cultivated in TSB broth for 96 h at $37^{\circ}C$, the culture showed the highest fibrinolytic activity ($131.15mU/{\mu}l$) at 96 h. Three bands of 27, 35 and 60 kDa were observed from culture supernatant by SDS-PAGE, and fibrin zymography showed that the major fibrinolytic protein was the 27 kDa band. The gene (aprEBS2) encoding the major fibrinolytic protein was cloned, and overexpressed in heterologous hosts, B. subtilis WB600 and E. coli BL21 (DE3). B. subtilis transformant showed 1.5-fold higher fibrinolytic activity than B. velezensis BS2. Overproduced AprEBS2 in E. coli was purified by affinity chromatography. The optimum pH and temperature were pH 8.0 and $37^{\circ}C$, respectively. $K_m$ and $V_{max}$ were 0.15 mM and $39.68{\mu}M/l/min$, respectively, when N-succinyl-Ala-Ala-Pro-Phe-pNA was used as the substrate. AprEBS2 has strong ${\alpha}$-fibrinogenase and moderate ${\beta}$-fibrinogenase activity. Considering its high fibrinolytic activity, significant salt tolerance, and ability to grow at $10^{\circ}C$, B. velezensis BS2 can be used as a starter for jeotgal.

• Journal of Yeungnam Medical Science
• /
• v.38 no.3
• /
• pp.219-224
• /
• 2021

Background: Omental transposition has been used to facilitate perineal wound healing in patients undergoing abdominoperineal resection (APR). However, there is no high-level evidence supporting the effectiveness of omental transposition in this regard. This study aimed to investigate the clinical efficacy of omental transposition in facilitating perineal wound healing after APR. Methods: In this systematic review, we systematically searched the PubMed/MEDLINE, Embase, Scopus, Cochrane Library, and Web of Science databases for literature regarding the topic of our study. Studies published since the inception of each database were considered for review. The outcomes of interest were the perineal wound healing rate at 1 and 3 months postoperatively, perineal wound infection rate, and perineal wound healing period. Results: Of the 1,923 studies identified, four articles representing 819 patients (omental transposition patients, n=295) were included in the final analysis. The wound healing rates at 1 and 3 months postoperatively in the omental transposition group (68.5% and 79.7%, respectively) did not significantly differ from those in the control group (57.4% and 78.7%, respectively) (p=0.759 and p=0.731, respectively). Perineal wound infection and chronic wound complication rates, including sinus, dehiscence, and fistula rates, also did not significantly differ between the omental transposition (8% and 7%, respectively) and control (11% and 7%, respectively) groups (p=0.221 and p=0.790, respectively). Conclusion: Our results suggest that omental transposition does not affect perineal wound healing in patients who undergo APR.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.27-37
• /
• 2020

The Fukushima Daiichi accident in 2011 revealed some vulnerabilities of existing Nuclear Power Plants (NPPs) under extended Station Blackout (SBO) accident conditions. One of the key Severe Accident Management (SAM) strategies developed post Fukushima accident is the In-Vessel Retention (IVR) Strategy which aims to retain the structural integrity of the Reactor Pressure Vessel (RPV). RELAP/SCDAPSIM/MOD3.4 is selected to predict the thermal-hydraulic response of APR1400 undergoing an extended SBO. To assess the effectiveness of the IVR strategy, it is essential to quantify the underlying uncertainties. In this work, both the epistemic and aleatory uncertainties are considered to identify the success window of the IVR strategy. A set of in-vessel relevant phenomena were identified based on Phenomena Identification and Ranking Tables (PIRT) developed for severe accidents and propagated through the thermal-hydraulic model using Wilk's sampling method. For this work, a Systems Engineering (SE) approach is applied to facilitate the development process of assessing the reliability and robustness of the APR1400 IVR strategy. Specifically, the Kossiakoff SE method is used to identify the requirements, functions and physical architecture, and to develop a design verification and validation plan. Using the SE approach provides a systematic tool to successfully achieve the research goal by linking each requirement to a verification or validation test with predefined success criteria at each stage of the model development. The developed model identified the conditions necessary for successful implementation of the IVR strategy which maintains the vessel integrity and prevents a melt-through.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.268-278
• /
• 2003

Purpose：The aim of this study was to evaluate the striatal binding ratio, the anterior/posterior ratio and reproducibility using a template based registration method using the standard MR template as a replacement for each patients MR image. Materials and Methods：This study analyzed the 123I IPT SPECT images of 30 patients with IPD, who were subdivided into 17 patients (56.6$\pm$10.8 yr, M/F : 8/9.) with mild IPD, and 13 patients (56.4$\pm$11.1 yr, M/F : 8/5) with severe IPD. In addition, 11 normal controls (57.8$\pm$14.4 yr, M/F : 4/7) were also analyzed. The ROIs were positioned manually in the same slice showing the highest striatal activity using the traditional manual method, whereas those were positioned automatically in a mid striatal slice of the SPECT image coregistered to the standard T1 weighted MR template. Results : The specific binding ratio (SBR) obtained using the template based registration method strongly correlated with those using the manual method in all groups : normal controls (r=0.85, P<0.001), mild IPD (r=0.84, P<0.001) and severe IPD (r=0.7, P=0.01). The SBRs obtained using both methods were significantly different among the three groups (P=0.05) and the SBRs obtained by the template based registration method were higher than those by the manual method (P=0.05) in all three groups. The APRs obtained by the template based registration correlated with those using manual method in only mild IPD (r=0.72, P=0.0). The APRs obtained by the template based registration method were significantly different from the normal controls and those with mild or severe IPD (P<0.05), whereas those obtained using the manual method were not significantly different among the three groups (P＞0.1). The reproducibility (rmsCV) of the template based registration method was 7.2% (normal controls：5.2%, mild IPD：4.2%, severe IPD：10.8%), whereas the reproducibility of the manual method was 31% (normal controls：19.7%, mild IPD：21.7%, severe IPD：46.2%). Conclusion：These results show that the use of $^{123}$ I-IPT SPECT for assessing IPD is affected by the methods used to position the striatal ROI. The template based registration method using the standard MR template can be useful in diagnosing IPD and assessing the disease severity with a high reproducibility. Therefore, the template based registration method appears to be a good replacement for the manual method.

• Applied Biological Chemistry
• /
• v.41 no.7
• /
• pp.533-538
• /
• 1998

In order to gain fundamental information on the utilization of lipids as energy source in mud-skipper, muscle lipids and their fatty acid composition were investigated with respect to life cycle-maturation (Aug), before-hibernation (Nov), and after-hibernation (Apr). Crude and neutral lipid were found to decrease from 1.2, 68.3% (Aug) via 0.7, 53.8% (Nov) to 0.4, 42.6% (Apr), respectively, whilst phospholipids and glycolipids increased from 29.5 and 2.2% (Aug) to 52.1 and 5.3% (Apr), respectively. In neutral lipids, TG contents gradually decreased from 53.8% (Aug) via 33.6% (Nov) to 23.1% (Apr), while FFA and sterol contents increased from 13.5 and 14.2% (Aug) to 22.3 and 24.5% (Apr), respectively. In phospholipids, PC content decreased from 61.2% (Aug) to 50.6% (Apr), while changes in PS and PE contents, as a whole, showed the opposite trends. In neutral lipids, the levels of some fatty acids such as 16:0, 16:1, 18:0, 18:1 and 20:5 $({\omega}3)$ were analyzed to be high, with the 20 : 5 being predominant, and the levels of saturated and monoene-acids gradually decreased, while polyene-acids increased in before and after hibernation. In before hibernation, 16:0, 16:1, 18:1 mainly decreased but 18:2, 18:3 $({\omega}3)$ and most of saturated and monoene acids such as 14:0, 14:1, 16:1, 18:0, 18:1 slightly decreased in after hibernation. From these findings, it was suggested that those fatty acids decreased during hibernation were used as a energy source, particularly 16:1 and 18:1 being most preferentially used. In phospholipids, the levels of 16:0, 18:0, 20:5 $({\omega}3)$, 22:5 $({\omega}3)$ and 22:6 $({\omega}3)$ were found to be high. Throughout the life cycle, the levels of monoene-acids in phospholipids stayed constant, whilst those of 18:2, 18:3 $({\omega}3)$ and saturated acids such as 16:0, 18:0 were found to be decreased gradually in before and after hibernation, whereas those for the high degree of polyene-acids such as 20:4 $({\omega}6)$, 20:5 $({\omega}3)$, 22:5 $({\omega}3)$, 22:6 $({\omega}3)$ increased, particularly 20:4 $({\omega}6)$, 20:5 $({\omega}3)$ being most increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1175-1183
• /
• 2013

Even if some CFD software developers and its users think that a state-of-the-art CFD software can be used to reasonably solve at least single-phase nuclear reactor safety problems, there remain limitations and uncertainties in the calculation result. From a regulatory perspective, the Korea Institute of Nuclear Safety (KINS) is presently conducting the performance assessment of commercial CFD software for nuclear reactor safety problems. In this study, to examine the prediction performance of commercial CFD software with the porous model in the analysis of the scale-down APR (Advanced Power Reactor Plus) internal flow, a simulation was conducted with the on-board numerical models in ANSYS CFX R.14 and FLUENT R.14. It was concluded that depending on the CFD software, the internal flow distribution of the scale-down APR was locally somewhat different. Although there was a limitation in estimating the prediction performance of the commercial CFD software owing to the limited amount of measured data, CFX R.14 showed more reasonable prediction results in comparison with FLUENT R.14. Meanwhile, owing to the difference in discretization methodology, FLUENT R.14 required more computational memory than CFX R.14 for the same grid system. Therefore, the CFD software suitable to the available computational resource should be selected for massively parallel computations.