• Advances in nano research
• /
• v.16 no.3
• /
• pp.303-311
• /
• 2024

This paper conducts a thorough economic evaluation of integrating nanoparticles into concrete structures within the construction industry, aiming to elevate the material properties of concrete. Employing the Halpin-Tsai micromechanics theory for deriving the effective material properties of the nanocomposite concrete structure, the research investigates the nuanced impact of nanoparticles on various mechanical properties, including the modulus of elasticity, compressive strength, and their indirect effects on the percentage of reinforcement. Implementing the Euler theory to formulate the governing equation based on Hamilton's principle, the study delves into the pricing dynamics of nanoparticles and their influence on the overall cost structure of concrete structures. Notably, the findings reveal that a measured increase in the volume percentage of nanoparticles, up to 1%, results in a remarkable 78% improvement in elastic modulus and a substantial 142% reduction in armature percentage. Remarkably, from an economic perspective, the incremental cost associated with the integration of nanoparticles is relatively modest (around $1 per ton of concrete), considering the substantial enhancements in mechanical properties achieved.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.751-759
• /
• 2016

It is known that the poor soil fertility of newly reclaimed saline soils is due to the lack of organic matter and available mineral nutrients for crop production. The effect of green manuring with Sesbania aculeata in combination with five rates of urea-N treatments (N0. N25, N50, N75, N100) on the productivity of a subsequent whole-crop barley and the fertility of the reclaimed saline soil in Saemangeum was evaluated in the field during 2013-2014 growing season. Sesbania was grown during summer season (June to October). The amount of Sesbania incorporated was $16.2Mg\;ha^{-1}$. Sesbania contributed to $393kg\;N\;ha^{-1}$ to the soils when ploughed down and incorporated before whole-crop barley cultivated. The performances of whole-crop barley following sesbania incorporation were significantly affected by a combination of Sesbania manuring and different N rates. The N fertilizer equivalence without N fertilizer following Sesbania was 42.6% ($63.9kg\;N\;ha^{-1}$), compared with N100 ($150kg\;N\;ha^{-1}$) in fallow soils. The whole-crop barley yield responded to N fertilizer rates in both sesbania-amended and fallow soil. The yield response to nitrogen rates in fallow soil was linear (Y=0.0586X+3.3011, $R^2=0.9534$), whereas that in sesbania-amended soils was quadratic (Y= -0.001X2+0.1322X+5.7143, $R^2=0.9576$). The yield of whole-crop barley in sesbania-amended with increasing N rates was increased up to SN75 (115 kgN) $10.3Mg\;ha^{-1}$. Apparent N recovery (ANR) of whole-crop barely showed decreased with sesbania plus increasing rates of N fertilizer. Despite higher yield with sesbania manuring plus increasing N rates, the contributions of N from Sesbania with increasing N rates to whole-crop barley were decreased, whereas those from fertilizer increment due to excessively mineralized Nitrogen. Considering yield, ANR, N contribution from Sesbania and nitrogen fertilizer, the optimum N rate was N50 rate following sesbania incorporation.

• Advances in nano research
• /
• v.2 no.4
• /
• pp.219-225
• /
• 2014

A simple preparation method on creating superhydrophobic surface using non-aligned carbon nanotubes (CNTs) was demonstrated. Superhydrophobic CNT thin films were prepared by doping a sonicated mixture of CNTs and chloroform onto a glass slide. Water contact angles of the CNT thin films were measured using a contact angle goniometer. The thin films were characterized using laser microscope and scanning electron microscope. Experimental results revealed that the highest average contact angle of $162{\pm}2^{\circ}$ was achieved when the films' thickness was $1.628{\mu}m$. The superhydrophobic surface was stable as the contact angle only receded from $162{\pm}2$ to $157{\pm}2^{\circ}$ after 10 min under normal atmospheric condition.

• Advances in nano research
• /
• v.16 no.2
• /
• pp.175-186
• /
• 2024

Dynamical behaviors of one-dimensional (1D) nano-sized structures are of great importance in nanotechnology applications. Therefore, the torsional dynamic response of functionally graded nanorods which could be used to model the nano electromechanical systems or micro electromechanical systems with torsional motion about the center of twist is examined based on the theory of strain gradient nonlocal elasticity in this work. The mathematical background is constructed based on both strain gradient theory and Eringen's nonlocal elasticity theory. The equation of motions and boundary conditions of radially functionally graded nanorods are derived using Hamilton's principle and then transformed into the eigenvalue analysis by using Fourier sine series. A general coefficient matrix is obtained to assemble the Stokes' transformation. The case of a restrained functionally graded nanorod embedded in two elastic springs against torsional rotation is then deeply investigated. The effect of changing the functionally graded index, the stiffness of elastic boundary conditions, the length scale parameter and nonlocal parameter are investigated in detail.

• Advances in nano research
• /
• v.11 no.6
• /
• pp.649-655
• /
• 2021

Nanotechnology is widely considered a major technology of the twenty-first century. Nanoparticles (NPs) has been shown to pass through reproductively significant biological barriers such as the blood-testicle and placental barriers. Thus, the purpose of this study was to determine the effect of silver Nanoparticles (Ag-NPs) on sperm-egg interaction and spermatozoa quality parameters in quail spermatozoa. Semen was suspended in Ringer solution containing Ag-NPs levels at 5.5 × 106 sperm/ml (0, 0.01, 0.1, 1 and 10 ppm). The results indicated that when sperm were counted at 0.1 ppm, the number of holes formed on the inner perivitelline layer was significantly increased compared to the control. The 10 ppm group had a significant reduction in sperm viability. At 0.1 and 1 ppm, the membrane integrity was significantly decreased (P < 0.05). All treatments (except 0.01 ppm Ag-NPs) had a significant (P < 0.05) effect on the percentage of spermatozoa with an intact acrosome when compared to the control group. At 0.1, 1, and 10 ppm Ag-NPs, morphological defects in the acrosome were observed. As a result, Ag-NPs is likely capable of destroying the acrosome membrane. This research indicates that Ag-NPs may be cytotoxic to spermatozoa by impairing sperm functionality and increasing sperm mortality.

• Advances in nano research
• /
• v.5 no.1
• /
• pp.27-34
• /
• 2017

One of the methods of removing cyanide from wastewater is surface adsorption. We simulated the removal of cyanide from a synthetic wastewater in the presence of Titanium dioxide nano-particles absorbent uses VISUAL MINTEQ 3.1 software. Our aim was to determine the factors affecting the adsorption of cyanide from synthetic wastewater applying simulation. Synthetic wastewater with a concentration of 100 mg/l of potassium cyanide was used for simulation. The amount of titanium dioxide was 1 g/l under the temperature of $25^{\circ}C$. The simulation was performed using an adsorption model of Freundlich and constant capacitance model. The results of simulation indicated that three factors including pH, nanoparticles of titanium dioxide and the primary concentration of cyanide affect the adsorption level of cyanide. The simulation and experimental results had a good agreement. Also by increasing the pH level of adsorption increases 11 units and then almost did not change. An increase in cyanide concentration, the adsorption level was decreased. In simulation process, rising the concentrations of titanium dioxide nanoparticles to 1 g/l, the rate of adsorption was increased and afterward no any change was observed. In all cases, the coefficient of determination between the experimental data and simulation data was above 0.9.

• Advances in nano research
• /
• v.1 no.1
• /
• pp.59-70
• /
• 2013

ZnO nanostructures of rod-like, faceted bar, cup-end bars, and spindle shaped morphologies could be grown by a low power ultrasonic synthesis process. pH of the reaction mixture seems to plays an important role for defining the final morphology of ZnO nanostructures. While the solution pH as low as 7 produces long, uniform rod-like nanostructures of mixed phase (ZnO and $Zn(OH)_2$), higher pH of the reaction mixture produces ZnO nanostructures of different morphologies in pure hexagonal wurtzite phase. pH of the reaction as high as 10 produces bar shaped uniform nanostructures with lower specific surface area and lower surface and lattice defects, reducing the defect emissions of ZnO in the visible region of their photoluminescence spectra.

• Advances in nano research
• /
• v.1 no.1
• /
• pp.1-11
• /
• 2013

The thermal buckling properties of double-walled carbon nanotubes (DWCNTs) are studied using nonlocal Timoshenko beam model, including the effects of transverse shear deformation and rotary inertia. The DWCNTs are considered as two nanotube shells coupled through the van der Waals interaction between them. The geometric nonlinearity is taken into account, which arises from the mid-plane stretching. Considering the small-scale effects, the governing equilibrium equations are derived and the critical buckling temperatures under uniform temperature rise are obtained. The results show that the critical buckling temperature can be overestimated by the local beam model if the nonlocal effect is overlooked for long nanotubes. In addition, the effect of shear deformation and rotary inertia on the buckling temperature is more obvious for the higher-order modes. The investigation of the thermal buckling properties of DWCNTs may be used as a useful reference for the application and the design of nanostructures in which DWCNTs act as basic elements.

• Advances in nano research
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2015

Thin film ethanol sensors made from ${\alpha}-Fe_2O_3$ decorated with multiwall carbon nanotubes(MWCNTs) were manufactured by the electron beam deposition method. The morphology of the decorated ${\alpha}-Fe_2O_3$/MWCNTs (25:1 weight ratios) nanocomposite powder was investigated using the scanning electron microscopy and X-ray diffraction techniques. The thickness of thin films has been determined from ellipsometric measurements. The response of manufactured sensors was investigated at different temperatures of the sensor work body and concentration of gas vapors. Good response of prepared sensors to ethanol vapors already at work body temperature of $150^{\circ}C$ was shown.

• Advances in nano research
• /
• v.14 no.2
• /
• pp.201-210
• /
• 2023

A ZnO/poly (amide-imide) hybrid nanocomposite film with different weight percentages of Zinc oxide (ZnO) nanoparticles is synthesized and characterized in this paper. A two-step reaction successfully synthesized a new kind of heteroaromatic diamine with bulky pendant groups. In order to produce 3, 5-dinitro-3, 3-bis (4-(4-Nitrophenoxy) phenyl) -2- benzofuran-1-one, 3, 3'-bis (4-hydroxyphenyl) benzofuran-1-one and 3'-bis (4-hydroxyphenyl) benzofuran-1-one were combined with 3'-bis (3-hydroxyphenyl) benzofuran-1-one. The obtained dinitro was then reduced by zinc dust and hydrochloric acid. The reaction of 4, 4^* carbonyl diphthalic anhydride with amino acid L-alanine in acetic acid leads to the production of very high yields of chiral diacid monomer. As a result of the direct polymerization of these monomers, new optically active polymers were formed (amide-imide). In order to synthesize poly (amide-imide)/ZnO nanocomposites with different weight percentages (2, 4, 6, 8, and 10%), PAI and ZnO nanoparticles were combined using ultrasonication SEM, Fourier transform infrared spectroscopy, X-ray diffraction and thermal gravimetry were used to characterize the PAI films.