• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.61-64
• /
• 2017

A phase shifter is one of the key components that change the phase of an individual antenna in millimeter-wave phased array system. This paper presents a low-loss phase shifter design with two parallel 2-state amplifiers. To get the same gain of $0^{\circ}/180^{\circ}$ each state, delay lines are in the middle of each stage of the 2-Stage amplifiers. Normally, when adding AMPs in parallel, a power combiner/divider such as Wilkinson Power Combiner/Divider is added, but they are directly connected because it can cause added losses in silicon wafer. The measured data shows 12dB gain and 174-degree phase difference at 5GHz.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1120-1122
• /
• 1995

This paper presents a 2-stage, simple, power-efficient 3V CMOS operational amplifier and its equation based design optimization. Because of its simple structure, it is very suitable as a VLSI library cell in analog/digital mixed-mode systems. The op-amp, which contains a constant-$g_m$ rail-to-rail input stage and a simple feedforward class-AB rail-to-rail output stage, is analyzed and the results are presented in the form of design equations and procedures, which provide an insight into the trade-offs among performance requirements. The results of SPICE simulations are shown to agree very welt with the use of design equations.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.7-9
• /
• 2011

본 논문은 LED 백라이트 구동을 위한 전력변환 제어기 설계 및 동특성에 대해 설명한다. 또한 근래 산업계에서 널리 사용하는 operational transconductance amplifier(OTA)와 operational amplifier(op-amp)의 상관관계를 분석하여 각각의 소자를 이용한 최적 제어기를 설계하였다. 설계와 해석을 위해 PSIM 시뮬레이션을 사용하였으며 구현한 PSIM 모델은 실험을 통하여 타당성을 증명하였다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.791-794
• /
• 1998

This paper presents a constant gm input stagefor low-voltage rail-to-rail operational amplifier. A proposed scheme uses two current paths to keep sum of the biasing currents of the complimentary input pairs. The op amp was designed in a $0.8\mu\textrm{m},$ n-well CMOS, double-polysilicon and double-metal technology. This achieved in weak inversion. The circuit can operate in power supply voltage from 1.5V up to 3V. An open-loop gain, AV, was simulated as 84dB for 15pF load. An unit-gain frequency, fT was 10MHz.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.675-683
• /
• 1991

When alpha particles are incident into the substrate, we have calculated the advanced current caused by collecting charges as a function of time, the energy of alpha particle, and the carrier concentration of the substrate. Employing SPICE, we have compared two circuits of which one has dummy cell and another has dummy line instead of dummy cell, and both are connected to the bit line node including sense amplifier and cell within the memory device. From the numerical analysis, (it may be conjectured that)the smaller energy of alpha particle and the lower concentration of the substrate, the more possibility of misoperation due to alpha particles. It may be also found that the effects of alpha particle are substantially reduced in the circuit without dummy cell.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.131-136
• /
• 2008

System을 통해 출력되는 신호를 측정할 때 정확한 측정을 방해하는 요소로 잡음이 있다. 이런 신호 측정의 방해 요소인 잡음을 제거 하는 방법 중의 하나로 Lock-in Amp(LIA)가 사용되고 있다. 본 논문에서는 잡음 신호의 제거를 위해 사용 하는 LIA를 제작 하고 특성을 파악 하였으며 RF통신을 이용하여 무선 형태로 제작 하였다. 현재 상용화된 LIA는 프로브를 통한 유선으로 측정신호의 입력을 받게 되지만 본 논문에서 제작된 LIA는 무선신호 형태로 입력 하게 된다. RF통신의 케리어 주파수는 447.9[MHz]로 Digital GMSK 변복조방식을 이용하였다. LIA의 제작은 Dual Phase Sensitive Detecter을 사용하였으며, 주요 구성 요소인 Phase Locked Loop, Phase Shifter, Phase Sensitive Detector, Low Pass Filter등의 구조와 특성을 조사하였다.

• Journal of Semiconductor Engineering
• /
• v.1 no.3
• /
• pp.81-87
• /
• 2020

An instrumentation amplifier (IA) and an analog-to-digital converter (ADC) are essential circuit blocks for accurate and robust sensor readout systems. This paper introduces recent advances in radiation-hardening by design (RHBD) techniques applied for the sensor readout integrated circuits (IC), e.g., the three-op-amp IA and the successive-approximation register (SAR) ADC, operating against total ionizing dose (TID) and singe event effect (SEE) in harsh radiation environments. The radiation-hardened IA utilized TID monitoring and adaptive reference control to compensate for transistor parameter variations due to radiation effects. The radiation-hardened SAR ADC adopts delay-based double-feedback flip-flops to prevent soft errors which flips the data bits. Radiation-hardened IA and ADC were verified through compact model simulation, and fabricated CMOS chips were measured in radiation facilities to confirm their radiation tolerance.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1444-1445
• /
• 2008

최근 Wireless Local Area Network(WLAN), Wide-band Code Division Multiple Access(WCDMA), CDMA2000, Bluetooth 등 다양한 모바일 통신 시스템에 대한 수요가 증가하고 있다. 이와 같은 모바일 통신 시스템에는 70dB이상의 SFDR(Spurious Free Dynamic Range)을 가진 ADC(Analog-to-Digital Converter)가 사용된다. 본 논문에서는 모바일 통신 시스템을 위한 SFDR 70dBc의 성능을 제공하는 10비트, 100Msps 파이프라인 ADC를 제안한다. 제안한 ADC는 요구되는 해상도 및 속도 사양을 만족시키기 위해 3단 파이프라인 구조를 채택하였으며, 입력단 SHA(Sample and Hold)회로에는 Nyquist 입력에서도 10비트 이상의 정확도로 신호를 샘플링하기 위해 부트스트래핑 기법 기반의 샘플링 스위치를 적용하였다. residue amplifier 회로에는 전력을 줄이기 위해 8배 residue amplifier 대신 3개의 2배 ressidue amplifier를 사용하였다. ADC의 높은 사양을 만족시키기 위해서는 높은 이득을 가지는 op-amp가 필수적이다. 제안한 ADC 는 0.18um CMOS 공정으로 설계되었으며, 100Msps의 동작 속도에서 70dBc 수준의 SFDR과 60dB 수준의 SNDR(Signal to Noise and Distortion Ratio)을 보여준다.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.443-446
• /
• 2004

Short channel IC circuits become increasingly important in modern high performance electronic systems. In this paper, parts of an analog hearing aid, an amplifier and a regulator, which are implemented with short channel CMOS devices, are designed and optimized in its performance.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.629-631
• /
• 2004

The proposed output buffer is presented for driving large-size LCD panels. This output buffer is designed by adding some simple circuitry to the conventional two-stage operational amplifier. The proposed circuit is simulated in a high-voltage 0.35um CMOS process with HSPICE. The simulated result is more improved settling time than that of conventional one.