• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.108-115
• /
• 2016

In this paper, fluid-structure of interaction behavior of a fluid-filled cylindrical polymer container impacted by a high speed spherical projectile was studied using ALE(Arbitrary Lagrangian Eulerian) method. The hydrodynamic ram phenomenon occurred by the impact projectile penetrating through the container was investigated by examining time histories of projectile velocity and fluid pressure and density. The analysis results were agreed reasonably well compared to those by experiments.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.55-66
• /
• 1993

The characteristics of the flow processes in the cylinder of the two-stroke cycle engines have become the subject of increasing and attention owing to the simplicity and the higher power per unit weight of the two-stroke cycle engine. Among the many factors which influence on the scavenging flow, the port angle is important factor. Hence, four different type models with one inlet-port and two side-ports are studied to show the effect of port angle on the laminar scavenging flow. When the inlet-port axial is relatively larger than the side-port axial angle, it is showed that the fresh charge penetrate into the burned gas and displace it first toward the cylinder head and then toward the exhaust port. When the inlet-port axial angle is much less than the side-port axial angle, the fresh charge through the inlet-port directly move toward the exhaust port. The result showed that the model A may suppress the generation of vortices in the vicinity of inlet and side prots which restrict the sufficient supply of fresh charge and obstruct the perfect displacement of all combustion products.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.683-695
• /
• 2002

The objective of the present study is to analyze the fluid flow with moving boundary using a finite element method. The algorithm uses a fractional step approach that can be used to solve low-speed flow with large density changes due to intense temperature gradients. The explicit Lax-Wendroff scheme is applied to nonlinear convective terms in the momentum equations to prevent checkerboard pressure oscillations. The ALE (Arbitrary Lagrangian Eulerian) method is adopted for moving grids. The numerical algorithm in the present study is validated for two-dimensional unsteady flow in a driven cavity and a natural convection problem. To extend the present numerical method to engine simulations, a piston-driven intake flow with moving boundary is also simulated. The density, temperature and axial velocity profiles are calculated for the three-dimensional unsteady piston-driven intake flow with density changes due to high inlet fluid temperatures using the present algorithm. The calculated results are in good agreement with other numerical and experimental ones.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.289-294
• /
• 2010

Numerical stud of an oscillating body in incompressible fluid is performed. Stabilized finite element method comprising of Streamline-Upwind/Petrov-Galerkin (SUPG) and Pressure-Stabilizing/Petrov-Galerkin (PSPG) formulations of linear triangular elements was employed to solve 2D incompressible Navier-Stokes equations whereas the motion of the body was considered by incorporating the arbitrary Langrangian-Eulerian(ALE) formulation. An algebraic moving mesh strategy is utilized for obtaining body conforming mesh deformation at each time step. Two tests cases, namely motion of a circular cylinder and of an airfoil in incompressible flow were analyzed. The model is first validated against the stationary cases and then the capability to handle moving boundaries is demonstrated.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.895-896
• /
• 2006

This paper proposes a new method to measure the ECG signal from the driver. The ECG signal is often measured in the room. But it is mixed with many kinds of noise when we measure it during the vehicle moving. We classified noise occupied most many parts as the experimental among them. And we designed one suitable filter for each noise. It used ALE(Adaptive Line Enhancement) to remove the noise occurred to electromagnetic wave in vehicle. To remove the noise occurred to steering or vibration of vehicle, we used Wavelet transformation after ALE(preprocessing filter).

• Wind and Structures
• /
• v.3 no.4
• /
• pp.291-302
• /
• 2000

A new finite element technique to solve the problem of wind and structure interactions is presented. Conventionally, wind analysis is performed on the Eulerian description in which the finite element mesh would not move in accordance with the wind flow. However, it is not the case in wind-structure interaction problems because nodes attached to the surface of structure should move with the displacement of structure. The arbitrary Lagrangian-Eulerian (ALE) method treats the mesh and flow independently, and allow the mesh to move. In this study, the analysis domain is divided into regions of the structure, air around the structure and the interface of two regions. To satisfy the compatibility and equilibrium conditions between separated regions and to carry out the efficient analysis, the rigid link is used. Also the equation of wind and that of structure are arranged in a single matrix equation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.269-272
• /
• 2008

Blast load, an impulsive load with extremely short time duration with very high pressure, is effected by ground and air condition, weight of charge, shape and location of structure. In this study, a blast dynamic analysis for the air-structural integrated model considering dynamic properties of materials and simulation of complex blast wave propagation by Arbitrary Lagrangian- Eulerian technique is suggested to perform an accurate blast analysis of concrete structures. For the verification of the proposed blast analysis method, which is the air-structure integrated model using ALE technique, the comparison of analysis and experimental results is performed. The verification confirms that the simulation of realistic behavior of RC wall structures is possible using ALE method. Also, the example cases which have been analyzed using this method show that the estimation to the structural failure criterion for blast load failure can be represented by energy absorbtion procedure.

• Korean Journal of Food Science and Technology
• /
• v.49 no.2
• /
• pp.132-140
• /
• 2017

Nuruk, a traditional Korean alcoholic beverage starter, was evaluated as an additional saccharifying agent comprising up to 1.5% (w/w) of malt weight in ale-type beer processing. Sample characteristics were monitored during fermentation, ripening, and storage. Beer containing nuruk showed higher numbers of total viable bacteria and yeast cell counts. Additionally, ethanol (6.19-6.35%), color (Standard Reference Method), foam stability ($228.49-368.24{Sigma}$), saccharogenic power (307-417), and reducing sugar (3.83-5.25%) increased as the amount of nuruk was increased, while viscosity (3.13-2.07 cP) and bitterness unit (19.68-13.13) were lower than in samples without nuruk. Overall acceptance and aftertaste of the beer were significantly higher in a preference test. These results demonstrate that nuruk can be used to produce a new type of ale.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1538-1551
• /
• 1997

Kinetic energy conservation for fixed and moving grids is examined in time-accurate finite element computation of fully unsteady inviscid flows. As numerical algorithms, fractional step method (FSM) and modified SIMPLE are used. To simulate the flow in moving grid system, arbitrary Lagrangian-Eulerian (ALE) method is adopted. In the present study, the energy conserving time integration rule for finite element algorithm is proposed and discussed schematically. It is shown that the discretization by Crank-Nicolson in time and Galerkin (central difference) in space must be used to ensure energy conservation. The developed code has been tested for a standing vortex in fixed or moving grid system, sloshing in a tank and propagation of a solitary wave, and has been shown to be a completely energy conserving algorithm.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.1-20
• /
• 2013

In the present paper, the sloshing resistance performance of a huge-size LNG carrier's insulation system is evaluated by the fluid-structure interaction (FSI) analysis. To do this, the global-local analysis which is based on the arbitrary Lagrangian-Eulerian (ALE) method is adopted to accurately calculate the structural behavior induced by internal LNG sloshing of a KC-1 type LNG carrier insulation system. During the global analysis, the sloshing flow and hydrodynamic pressure of internal LNG are analyzed by postulating the flexible insulation system as a rigid body. In addition, during the local analysis, the local hydroelastic response of the LNG carrier insulation system is computed by solving the local hydroelastic model where the entire and flexible insulation system is adopted and the numerical analysis results of the global analysis such as initial and boundary conditions are implemented into the local finite element model. The proposed novel analysis techniques can potentially be used to evaluate the structural integrity of LNG carrier insulation systems.