• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.335-338
• /
• 2010

A recent study for tracing the profiles of supersonic axisymmetric Minimum Length Nozzle with uniform and parallel flow at the exit section, the stagnation temperature is taken into account. The aim of this work is to add optimization algorithm to the supersonic nozzle design in order to get the optimum nozzle shape. The comparisons of the nozzle contours based on the method of characteristics are presented. The specific heats and their ratio vary with the stagnation temperature when this temperature of a perfect gas increases. An application is made for air in a supersonic nozzle.

• 한국안전학회지
• /
• 제22권1호
• /
• pp.19-23
• /
• 2007

The aim of this study was to determine residual stresses in thermal barrier coatings(TBCs) by isothermal heating. Specimens were heated at the range of $1000{\sim}1600^{\circ}C$. A finite element method was used to determine the residual stresses. Finite element coupled heat transfer and elastic-plastic thermal stress analysis using a general purpose commercial FEM software ABAQUS. I obtained the stresses were not affected below the temperature of $1400^{\circ}C$ but affected over that of temperature.

• 건축사
• /
• 11호통권82호
• /
• pp.22-25
• /
• 1975

The aim of this study is the introduction of simplified method for the design stress analysis of multi-span gable frame structures with crane supports. Under the author's assumptions made previously for the same structures of single span, simplified stress analysis and exact computer analysis are excuted for some multi-span sample structures. Comparing the results of both stress analysis and with some modifications, a feasible simplified method for the design stress analysis of multi-span gable frame structures with crane supports is established.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.103-104
• /
• 2015

Solar energy has proven to be a potential clean energy source to help offset the large consumption of fossil. Nowadays, many research projects aim to enhance photovoltaic (PV) system performance and functionality. This research focuses on integrating self-monitor capability into dc-dc converters that control PV panels to detect a fault in series-connected PV cells, called hot spotting. A detection method using ac parameter characterization is proposed and its operation is examined through simulation.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.385-397
• /
• 2001

Consider an inverse problem of determining of the 2-D temperature distribution from known temperature given at some time T>0. Our aim is to find the temperature for 0

• 한국컴퓨터정보학회논문지
• /
• 제25권3호
• /
• pp.145-154
• /
• 2020

본 논문에서는 자전거 피팅을 좀 더 정교하고 신속하게 진행하기 위해 자전거 피팅 소프트웨어와 하드웨어를 통합한 시스템을 개발하기 위한 DB구축을 목표로 포괄적인 자전거 피팅 방법의 표준화가 요구됨에 따라 다수의 임상결과와 실험을 통해 이에 맞는 자전거 피팅 방법을 제안한다. 이 자전거 피팅 방법은 심층상담, 자전거체크, 정교한 신체사이징 및 분석을 통해 라이더를 위한 자전거 세팅 값을 결정할 수 있으며 이 세팅 값으로 조정된 자전거에서 고정 라이딩을 통해 자세와 페달링 토크를 분석하고 이을 통해 가장 효율이 높은 세팅 값을 찾아 자전거를 라이더의 요구에 맞게 최적화 할 수 있는 피팅 방법에 대한 결과를 도출 했다. 이와 같은 피팅 방법은 자전거 라이더의 만족도를 높일 수 있으며 정확한 자전거 세팅 값을 통해 부상예방도 기대할 수 있다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권3호
• /
• pp.305-320
• /
• 2020

This study aims to generalize MINRES-N2 method [1]. It means that we tend to obtain an algorithm to transfer each normal matrix - that its eigenvalues belong to an algebraic curve of low degree k- to its condensed form through using a unitary similarity transformation. Then, we aim to obtain a method to solve a system of linear equations that its coefficient matrix is equal to such a matrix by utilizing it. Finally this method is compared to the well-known GMRES method through using numerical examples. The results obtained through examples show that the given method is more efficient than GMRES.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.87-96
• /
• 2006

Since the idea of registering architectural heritage from the early 20th century was introduced as part of the code in the Cultural Heritage Protection Law in July, 2001, more systematic and flexible application the code has been in great demand. It is the aim of this thesis that we preserve modern buildings and then use this research data what find our modern history. So we should find connection of modem and tradition with the overcome of the feeling of being victimized. Accordingly, based on preservation cases and finding of modern house heritage, it is the aim of this thesis that we find the way of the best use. The purpose of this research is to establish a more comprehensive and commonsensical guideline for the preservation of modern architecture satisfying both the government and the registering party, based on more thorough architectural analysis of residential edifices. The results of this study were as follows: (1) It is necessary for application and conservation by point, area and network method. (2) It is needed that periodically check and record central system for the purpose of the management of those. (3) It's consider that develop of conservation method on co-ownership with citizen by house personality.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3093-3097
• /
• 2013

The synthesis, X-ray crystallography, spectroscopic (IR, UV-vis), and electrochemical properties of the title compound, $[H_3O][Cr(dipic)_2][H_3O^+.Cl^-]$ (1), ($H_2dipic$ = 2,6-pyridinedicarboxylic acid), are reported. This complex crystallizes in the monoclinic space group Cc with a = 14.9006(10) ${\AA}$, b = 12.2114(8) ${\AA}$, c = 8.6337(6) ${\AA}$, ${\alpha}=90.00^{\circ}$, ${\beta}=92.7460(10)^{\circ}$, ${\gamma}=90.00^{\circ}$, and V = 1569.16(18) ${\AA}^3$ with Z = 4. The hydrogen bonding and noncovalent interactions play roles in the stabilization of the structure. In order to gain a better understanding of the most important geometrical parameters in the structure of the complex, atoms in molecules (AIM) method at B3LYP/6-31G level of theory has been employed.

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.709-726
• /
• 2016

Corrugated-core sandwich panels are prevalent for many applications in industries. The researches performed with the aim of optimization of such structures in the literature have considered a deterministic approach. However, it is believed that deterministic optimum points may lead to high-risk designs instead of optimum ones. In this paper, an effort has been made to provide a reliable and robust design of corrugated-core sandwich structures through stochastic and probabilistic multi-objective optimization approach. The optimization is performed using a coupling between genetic algorithm (GA), Monte Carlo simulation (MCS) and finite element method (FEM). To this aim, Prob. Design module in ANSYS is employed and using a coupling between optimization codes in MATLAB and ANSYS, a connection has been made between numerical results and optimization process. Results in both cases of deterministic and probabilistic multi-objective optimizations are illustrated and compared together to gain a better understanding of the best sandwich panel design by taking into account reliability and robustness. Comparison of results with a similar deterministic optimization study demonstrated better reliability and robustness of optimum point of this study.