• Journal of the Korea Society for Simulation
• /
• v.30 no.3
• /
• pp.1-9
• /
• 2021

Commander and staffs on the battlefield are aware of the situation and, based on the results, they perform military activities through their military decisions. Recently, with the development of information technology, the demand for artificial intelligence to support military decisions has increased. It is essential to identify, collect, and pre-process the data set for reinforcement learning to utilize artificial intelligence. However, data on enemies lacking in terms of accuracy, timeliness, and abundance is not suitable for use as AI learning data, so a training model is needed to collect AI learning data. In this paper, a methodology for learning artificial intelligence was presented using the constructive wargame model exercise data. First, the role and scope of artificial intelligence to support the commander and staff in the military decision-making process were specified, and to train artificial intelligence according to the role, learning data was identified in the Chang-Jo 21 model exercise data and the learning results were simulated. The simulation data set was created as imaginary sample data, and the doctrine of ROK Army, which is restricted to disclosure, was utilized with US Army's doctrine that can be collected on the Internet.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.697-702
• /
• 2004

As for the digital content, a reproduction is easy and manuscript is identical with original copy. Because of these characteristics, there are difficulties on prevention of an illegal reproduction and an illegal currency. In recent days various digital content service systems based on a web are commercialized. An appropriate copyright protection technology is required so that these systems develop as a profit model. Generally we use encrypted digital content transmission method for the copyright protection on a web base system. At the time of this, it is increased sire of encrypted digital content. As for this, it be increased time required on an execution process. Therefore, a design of the system that considered a execution time and a security is required. In this study, we designed the digital content transmission system that considered execution time and a security through a partial encryption based on a digital content copyright management technique. Also we evaluated performance of a proposed system through analysis.

• Composites Research
• /
• v.20 no.4
• /
• pp.9-17
• /
• 2007

Powder metallurgy has been employed for the development of SiC particle reinforced aluminum metal matrix composites by means of hot isotropic pressing and vacuum hot pressing. A material model based on micro-mechanical approach then has been presented for the processes. Densification occurs by the inelastic flow of matrix materials during the consolidation, and consequently it depends on many process conditions such as applied pressure, temperature and volume fraction of reinforcement. The model is implemented into finite element software so that the process simulation can be performed enabling the predicted relative density to be compared with experimental data. In order to determine the performance of finished products, further tensile test has been conducted using the developed specimens. The effect of internal void of the materials on mechanical properties therefore can be investigated.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.740-742
• /
• 1998

In this paper, we described the effect of rapid thermal annealing on the electrical properties of interfacial layer between various top electrodes and $(Ba_{0.5}Sr_{0.5})TiO_3$ thin films. BST thin films were fabricated on Pt/TiN/$SiO_2$/Si substrate by RF magnetron sputtering technique. AI, Ag, and Cu films for the formation of top electrode were deposited on BST thin films by thermal evaporator. Top electrodes/BST/Pt capacitor annealed with rapid thermal annealing at various temperature. In $(Ba_{0.5}Sr_{0.5})TiO_3$ thin films with Cu top electrode annealed at $500^{\circ}C$, the dielectric constant was measured to the value of 366 at 1.2 [kHz] and the leakage current was obtained to the value of $5.85{\times}10^{-7}\;[A/cm^2}$ at the forward bias of 2 [V].

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.99-105
• /
• 1999

The aims of this studies were carried out to investigate the antioxidant activity on low density lipoprotein(LDL) using substances extracted from Bacillus sp. RH-5. The antioxidative substances produced extracellular in the culture broth by Bacillius sp. RH-S was obtained by elution of chloroform : methanol from silicagel column (80cm x100cm) chromatography. Band 4 eluted from fraction 3 by TLC was appeared at highest level of antioxidative activity using thiocyanate methed. Band 4 at a concentration of 100 or 200$\mu$g/$m\ell$ inhibited oxidation of LDL induced by the mouse transformed macrophage. According to IR. NMR or GC/MASS, the antioxidant substance was identified as 5-hydroxyindole.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.3
• /
• pp.230-239
• /
• 2015

This study was performed to find a relationship between each pattern identification and vascular status using the second derivative of photoplethysmogram waveform(SDPTG) indices. We analyzed 200 subjects who participated in stroke preventive examination. We classified the subjects into four groups of pattern identifications; Fire-Heat pattern(火熱證; FH), Yin Deficiency pattern(陰虛證; YD), Qi Deficiency pattern(氣虛證; QD) and Dampness-Phlegm pattern(濕痰證; DP) that based on Korean Standard Pattern Identifications for Stroke-Ⅲ. We studied a relationship between each pattern identification and the SDPTG. The total number of the subject group was 200, whereas the groups were divided into four groups; Fire-Heat pattern group(n=49), Yin Deficiency pattern(n=57), Qi Deficiency pattern(n=45), and Dampness-Phlegm pattern(n=49). b/a ratio was related with age and systolic blood pressure, c/a ratio was associated with age, systolic blood pressure, fasting blood sugar and Total cholesterol, d/a ratio was affected with age, diastolic blood pressure, and hypertension, e/a ratio was related with age and sex and SDPTG AI was associated with age. c/a ratio and d/a ratio were significantly higher in the Fire-Heat group than in the Qi Deficiency group. SDPTG AI was significantly higher in the Qi Deficiency group than in the Fire-Heat group. The Qi Deficiency group was significantly older than the Fire-Heat group and the number of hypertension patients was significantly more in the Fire-Heat group than in the Qi Deficiency group. Through this study, we found out some significant relationships between each pattern identification group and the SDPTG indices.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.131-141
• /
• 2022

Future battlefield domains are expanding to ground, sea, air, space, and cyber, so future military operations are expected to be carried out simultaneously and complexly in various battlefield domains. In addition, the application of convergence technologies that create innovations in all fields of economy, society, and defense, such as artificial intelligence, IoT, and big data, is being promoted. However, since the current Korean military C4I system manages warfighting function DBs in one DB server, the efficiency of combat performance is reduced utilization and distribution speed of data and operation response time. To solve this problem, research is needed on how to apply the 4th industrial revolution technologies such as AI, IoT, 5G, big data, and cloud to the Korean military C4I system, but research on this is insufficient. Therefore, this paper analyzes the problems of the current Korean military C4I system and proposes to apply the 4th industrial revolution technology in terms of operational mission, network and data link, computing environment, cyber operation, interoperability and interlocking capabilities.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.385-394
• /
• 1994

Numerical solutions were obtained to the model equations for various of the parameters characterizing the pore structure, effective internal diffusion, and the chemical reaction constant. The conversion was decreased with the cause of pore closure at the surface of reacting particles, reduction of porosity, surface area of reaction and effective diffusion coefficient in the solid with the progress of reaction. Total conversion was strongly dependent on the local conversion at surface. According to the decreasing of impregnated concentration of the copper oxide and the increase of the flue gases concentration, total conversion was increased. The conversion was affected by gas flow rate and pore size distribution in the reacting solid.

• Microbiology and Biotechnology Letters
• /
• v.14 no.3
• /
• pp.239-244
• /
• 1986

To develop the potential use as new host strain for gene cloning, alkaline-tolerant isolates from soil were examined for amylase activity, protease activity, antimicrobial activity and transformability by using plasmid pUB 110. Of these strains, one was selected and identified as Bacillus sp. YA-14. in the enzymatic properties of Bacillus sp. YA-14 the optimal conditions for the reaction of amylase and protease were at pH 0.8 and pH 7.5 respectively. The antimicrobial activity of Bacillus sp. YA-14 was also found. For the transformation, Bacillus sp. YA-14 was cultured to late logarithmic growth phase ai 37$^{\circ}C$ in modified SPI medium (pH 8.0) containing 0.4% MgSO$_4$. The presence of pUB 110 plasmid DNA in transformants was confirmed by electrophoresis and stably maintained in the new host.