• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.118-118
• /
• 2000

New single-source precursor, [AlCI3:NH2tBu] was synthesized for AlN thin f film processing with AICI3 (Aluminum Chloride) and tBuNH2 (tert-butylamine). AlN thin films for packaging aspplication were deposited on sapphire substrate by a atmosph하ie-pressure MOCVD. In most of other study methyl-based AI precursors w were used for source, But herein Aluminum Chloride was used for as AI source i in order to prevent the carbon contamination in the films and stabilize the p precursor. New precursor showed the very high gas vapor pressure so it allowed to m make the film under atmospheric-pressure and get the high purified film. High q quality AlN thin film was obtained at 700 to $900^{\circ}C$. The new precursor was p purified by a sublimation technique and help to fabricate high purity film. It s showed high vapor pressure, which is able to a critieal factor for the high purity a and atmospheric CVD of AlN. High Quality AIN thin film was obtained at $700-900^{\circ}C$. The AIN film was characterized by RBS

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.135-138
• /
• 2007

A 3 year-old female Afghan hound came to the Veterinary Referral Hospital of the College of Veterinary Medicine, Seoul National University for artificial insemination (AI) with frozen semen. In order to inseminate, semen was frozen in USA 3 years ago. Frozen semen was sent by air from Santiago to Seoul for AI. The stud died 2 years ago, so we could only use a limited amount of frozen semen in that estrus cycle. The number of total motile spermatozoa was $59.4{\times}10^6$and the total volume was 1.2 ml. The frozen spermatozoa were thawed in $70^{\circ}C$ water for 8 sec, which were then deposited at the bilateral uterine horns by a surgical method. The number of corpus luteum was 6. Sixty days after artificial insemination resulted in the birth of 4 puppies, all of which are alive and healthy.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.735-747
• /
• 2023

The composition of fatty acids determines the flavor and quality of meat. Flavor compounds are generated during the cooking process by the decomposition of volatile fatty acids via lipid oxidation. A number of research on candidate genes related to fatty acid content in livestock species have been published. The majority of these studies focused on pigs and cattle; the association between fatty acid composition and meat quality in chickens has rarely been reported. Therefore, this study investigated candidate genes associated with fatty acid composition in chickens. A genome-wide association study (GWAS) was performed on 767 individuals from an F2 crossbred population of Yeonsan Ogye and White Leghorn chickens. The Illumina chicken 60K significant single-nucleotide polymorphism (SNP) genotype data and 30 fatty acids (%) in the breast meat of animals slaughtered at 10 weeks of age were analyzed. SNPs were shown to be significant in 15 traits: C10:0, C14:0, C18:0, C18:1n-7, C18:1n-9, C18:2n-6, C20:0, C20:2, C20:3n-6, C20:4n-6, C20:5n-3, C24:0, C24:1n-9, monounsaturated fatty acids (MUFA) and polyunsaturated fatty acids (PUFA). These SNPs were mostly located on chromosome 10 and around the following genes: ACSS3, BTG1, MCEE, PPARGC1A, ACSL4, ELOVL4, CYB5R4, ME1, and TRPM1. Both oleic acid and arachidonic acid contained the candidate genes: MCEE and TRPM1. These two fatty acids are antagonistic to each other and have been identified as traits that contribute to the production of volatile fatty acids. The results of this study improve our understanding of the genetic mechanisms through which fatty acids in chicken affect the meat flavor.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.263-268
• /
• 1999

In this study, a new concept of aluminum-matrix composites and the possibility of in-situ processing are suggested, and preliminary results on AI- Ti system are presented. Fine powders of AI-lO% Ti were prepared by the gas atomization so that fine $Al_3Ti$ formed into flake shape. A 25v/o $Al_3Ti/Al$ composite sample was made by the pow­d er metallurgy process involving hot extrusion. Microstructure and mechanical behavior both at room temperature and high temperatures were analysed by OM, SEM, TEM and tension test. Microstructural characteristics and mechanical properties of the composites exhibited similar behavior to those of $SiC_w/2124$ composites. Merits and drawbacks of the $Al_3Ti/Al$ composites are discussed together with a possibility of further improvement.

• Electronics and Telecommunications Trends
• /
• v.35 no.3
• /
• pp.76-84
• /
• 2020

Neuromorphic hardware refers to brain-inspired computers or components that model an artificial neural network comprising densely connected parallel neurons and synapses. The major element in the widespread deployment of neural networks in embedded devices are efficient architecture for neuromorphic hardware with regard to performance, power consumption, and chip area. Spiking neural networks (SiNNs) are brain-inspired in which the communication among neurons is modeled in the form of spikes. Owing to brainlike operating modes, SNNs can be power efficient. However, issues still exist with research and actual application of SNNs. In this issue, we focus on the technology development cases and market trends of two typical tracks, which are listed above, from the point of view of artificial intelligence neuromorphic circuits and subsequently describe their future development prospects.

• Biomedical Science Letters
• /
• v.8 no.2
• /
• pp.89-93
• /
• 2002

To investigate the postmortem changes in hepatic cell membrane, the rats were sacrificed with cervical dislocation and kept in an incubator at $25^{\circ}C$, 70% of humidity for 12 hours. The biochemical experiments in postmortem were done at 2, 4, 8 and 12 hours. The degree of rigor mortis and algor mortis were increased with the time during 12 hours. The contents of hepatic malondialdehyde were rapidly increased ai 2 hours, and gradually decreased afterward. In histological findings, after 8 hours, the clotted blood was seen in central vein and sinusoids, and especially portal veins were dilated a1though the structure of hepatic lobules was preserved well. Furthermore, both in the histochemical and enzymatic examinations, membrane bounding alkaline phosphatase activities were gradually decreased with the time. In conclusion, the activity of membrane bounding alkaline phosphatase was linearly decreased with time in the early postmortem period and so it might be referred to the possibility fur the estimation of death time in the early postmortem period.

• Journal of Environmental Health Sciences
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2004

This study was carried out to investigate influencing factors of bisphenol A(BPA) removal characteristic in conventional water treatment systems to be connected with coagulation, sedimentation, filtration and disinfection. The result are summarized as follows; In BPA removal, optimal doses of PAC, alum, ferric chloride were 7.5 mg Al/L, 10.0 mg AI/L, 15.0 mg Fek. PAC was most effective coagulant to remove BPA. In coagulation process, BPA removal efficiency were increased about 2％ by adjusting pH of raw water as 6. At temperature rise 1$0^{\circ}C$, BPA removal efficiency were increased 0.94％. but BPA removal efficiency in sand filtration process were under 1 ％ie, so that BPA was almost not removed. At free chlorine dose 1, 2 mg/L, the reaction rate constant k in the BPA removal have been calculated to be 0.397, 0.953 min$^{-1}$ . At free chlorine dose 1, 2 mg/1-, degradation reaction of BPA was completed during 10 min and BFA removal efficiencies were 97.66, 99.99％ at this time.

• Smart Structures and Systems
• /
• v.25 no.4
• /
• pp.401-408
• /
• 2020

This paper deals with the problem of global stabilization for a class of nonlinear control systems. An effective approach is proposed for controlling the system interaction of structures through a combination of parallel distributed compensation (PDC) intelligent controllers and fuzzy observers. An efficient approximate inference algorithm using expectation propagation and a Bayesian additive model is developed which allows us to predict the total number of control systems, thereby contributing to a more adaptive trajectory for the closed-loop system and that of its corresponding model. The closed-loop fuzzy system can be made as close as desired, so that the behavior of the closed-loop system can be rigorously predicted by establishing that of the closed-loop fuzzy system.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.142-148
• /
• 1997

In this paper, forging of internal triangular and involute serrations are analyzed by upper bound method. Kinematically admissible velocity fields for half pitch of the serration were proposed. It was assumed that the shape flow surface during forging is a straight line perpendicular to plane of symmetry. Using the suggested velocity fields, forging loads and relative pressures were calculated by numerical method. Experiments were carride out with commercial AI 2024 aluminium alloy. As a result, the calculated solutions are good agreement with experimental results, so it is useful to predict the loads for forging of internal serrations.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.302-309
• /
• 1996

Fe-5.7%AI-1.1%Cr-0.5%Si damping alloys containing 0%C and 0.12%C were heat-treated at $800^{\circ}C$ for an hour and then cooled by using some different methods. The damping behaviors of these alloys were observed by optical microscopy, X-ray diffraction and a specific damping capacity(SDC) test. Effect of cooling method on microstructures and the internal stresses of these alloys were negligible while the damping capacity of these alloys was considerably deteriorated by water quenching. The (200) texture was mainly developed by water quenching while the (110) texture by furnace cooling. These results were interpreted by the magnetization behaviors of the ferromagnetic $\alpha$ ferrite. The easy axis of magnetization in <100> direction means that <100> axis has more $180^{\circ}$ magnetic domain walls than $90^{\circ}$ ones. Thus. $180^{\circ}$ magnetic domain walls were more formed by water quenching, which deteriorated the damping capacity of these alloys. Consequently, the amount of magnetic domain walls giving good damping capacity became less so that the damping capacity was poor in water quenching.