• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2024

In this study, an AI-based algorithm was developed to prevent image quality deterioration and reading errors due to patient movement in PET/CT examinations that use radioisotopes in medical institutions to test cancer and other diseases. Using the Mothion Free software developed using, we checked the degree of correction of movement due to breathing, evaluated its usefulness, and conducted a study for clinical application. The experimental method was to use an RPM Phantom to inject the radioisotope 18F-FDG into a vacuum vial and a sphere of a NEMA IEC body Phantom of different sizes, and to produce images by directing the movement of the radioisotope into a moving lesion during respiration. The vacuum vial had different degrees of movement at different positions, and the spheres of the NEMA IEC body Phantom of different sizes produced different sizes of lesions. Through the acquired images, the lesion volume, maximum SUV, and average SUV were each measured to quantitatively evaluate the degree of motion correction by Motion Free. The average SUV of vacuum vial A, with a large degree of movement, was reduced by 23.36 %, and the error rate of vacuum vial B, with a small degree of movement, was reduced by 29.3 %. The average SUV error rate at the sphere 37mm and 22mm of the NEMA IEC body Phantom was reduced by 29.3 % and 26.51 %, respectively. The average error rate of the four measurements from which the error rate was calculated decreased by 30.03 %, indicating a more accurate average SUV value. In this study, only two-dimensional movements could be produced, so in order to obtain more accurate data, a Phantom that can embody the actual breathing movement of the human body was used, and if the diversity of the range of movement was configured, a more accurate evaluation of usability could be made.

• Journal of the Korean Society of Radiology
• /
• v.18 no.4
• /
• pp.327-334
• /
• 2024

The purpose of this study is to develop a customized foot disease analysis and management system for diabetic patients to prevent foot ulcers in diabetic foot disease patients. This system utilizes image analysis technology to measure not only foot pressure, but also ankle deformation, body balance, and foot wounds. Through various data, it is possible to accurately analyze the state of foot deformation, and based on this, the exact state of deformation of the foot of a patient with diabetic foot disease was identified and a customized insole was produced. This study was conducted to examine the satisfaction level of using an application that checks the status of diabetic foot disease wounds and to identify the degenerative status of diabetic foot disease patients and foot disease patients by wearing customized insoles and to survey the satisfaction of wearing insoles. As a result of the study, the knee angle measured for plantar pressure was -0.8 ± 1.3 degrees and ranged from a minimum of -2.4 degrees to a maximum of 1.1 degrees, and there was no significant difference in valgus knee between both lower extremities (p = 0.534). There was a significant difference in tibial angle between both lower extremities (p < 0.001). Ankle angle on the left side was 2.6 ± 2.0 degrees, ranging from a minimum of 0 degrees to a maximum of 6.3 degrees, and on the right, it was 4.5 ± 2.1 degrees, with a distribution of minimum 1.5 degrees to a maximum of 9.1 degrees. There was a significant difference in ankle angle between both lower extremities (p = 0.011). They responded that they felt an average of 4.3 points of satisfaction with the plantar pressure measurement application. Respondents responded that they felt an average of 3.9 points of satisfaction with the use of customized insoles.

• Journal of KIISE:Software and Applications
• /
• v.37 no.3
• /
• pp.194-204
• /
• 2010

A space, real or virtual, comprises regions as its parts and physical objects residing in them. A coherent and sophisticated representaion scheme for their spatial relations premises the precision and plausibility in its associated agents' inferencing on the spatial relations and the development of events occurring in such a space. The existing spatial models are not suitable for a comprehensive representation of the general spatial relations in that they have limited expressive powers based on the dichotomy between the large and small scales, or support only a small set of topological relations. The representaion model we propose has the following distinctive chracteristics: firstly, our model provides a comprehensive representation scheme to accommodate large and small scale spaces in an integrated fashion; secondly, our model greatly elaborated the spatial relations among the small-scale objects based on their contact relations and the compositional relations among their respective components objects beyond the basic topological relations like disjoint and touch; thirdly, our model further diversifies the types of supported relations by adding the container property besides the soildness together with considering the gravity direction. The resulting integrated spatial knowledge representation scheme considering the gravity allows the diverse spatial relations in the real world to be simulated in a precise manner in relation to the associated spatial events and provides an expression measure for the agents in such a cyber-world to capture the spatial knowledge to be used for recognizing the situations in the spatial aspects.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2280-2288
• /
• 1997

An agent is a software element that, by making use of knowledge and inference, performs tasks on behalf of the user. In general, an agent has the properties of autonomy, social ability, reactivity, and durability. Many researches on agents are more and more aiming at the multiagent systems since it is not sufficient to let a single agent do the whole things, especially in a real world where tasks require many diverse activities. However, the multiagent frameworks still have some limitations in the processing of user queries that are often ambiguous and goal-oriented. Also, a series of procedures or plans could not be generated from a single query directly. In order to give more intelligence to the multiagent framework, we propose a method of extending the framework with a plan generation module. The open agent architecture (OAA), which is a multiagent framework that we developed, is integrated with UCPOP, which is a AI planner. A travel schedule management agent (TSMA) system is implemented to explore the effects of the method. The extended system enables the user to only specify goal-oriented queries, and the plans and procedures to satisfy these goals are generated automatically. Also, this system provides a cooperative and knowledge-sharing environment that integrates several knowledge-based systems and planning systems that are distributed and used independently.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.131-140
• /
• 2015

Purpose : The purpose of this study was to analyze the coordination of the trunk tilting angle and bilateral lower limbs according to the stirrups length during trot in equestrian. Methods : Participants selected as subject were consisted of adult male(n=7, mean age: $45.00{\pm}3.78yrs$, mean height: $172.50{\pm}2.44cm$, mean body mass: $76.95{\pm}4.40kg$, mean, mean leg length: $97.30{\pm}2.60cm$). They were divided into 3-types of stirrups lengths(67 cm, 72 cm, 77 cm) during trot. The variables analyzed were consisted of the trunk front-rear angle, lower limb joint(Right Left hip, knee, ankle), overall movement index(OMI) of the lower limbs(thigh, shank, foot) and asymmetry index(AI%) during trot. Results : The average angle in hip and knee joint showed more extended posture according to the increase of stirrups lengths and ankle angle showed more plantarflexion posture according to increase of stirrups length during 1 stride in trot. Also, average angle showed more extended posture in right hip and ankle joint than that of left. The angle of knee joint didn't show significant difference statistically between right and left. Also asymmetric index in average angle of hip, knee and ankle joint didn't show significant difference statistically in between lower limbs, but hip joint showed higher asymmetric index in stirrup length of 77 cm and ankle joint showed higher asymmetric index in stirrup length of 67 cm than that of the others respectively. The FR angle in trunk of horse-rider showed relative backward leaning motions at stirrup length of 67 cm and 77 cm than that of stirrup length of 72 cm during stance and swing phase. OMI in thigh, shank, and foot limbs didn't show significant difference statistically according to the stirrups length of right and left lower limbs, but left lower limbs showed higher index than that of right lower limb. Stirrup length of 72 cm in shank and foot limbs showed higher index than that of stirrup length of 67 cm and 77 cm. But stirrup length of 72 cm showed higher asymmetric index than that of stirrups length of 67 cm and 77 cm. Conclusions : When considering the above, 72 cm(ratio of lower limb 74.04%) stirrup lengths could be useful in posture correction and stabilization than 67cm(ratio of lower limb 68.69%) and 77 cm(ratio of lower limb 79.18%) stirrup lengths during trot in horse back riding.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.2
• /
• pp.49-57
• /
• 2015

The purpose of this study is to provide the visual landscape modelling on Josun royal tombs and surrounding. The visual landscape of traditional heritage is illustrated by the main view points of analysis. This analysis examines limited view points and cannot reflect a reality of environments. Nowadays various equipments and methodologies are developed for the visual landscape research. This study used new tools for analysis which are Sketch up (3D simulation) and mini helicopter (UAV). With those tools, this research examines not only view points of the analysis but also axis views and disincentive environments as a complex analysis. First of all, the research examined 3D modelling for the virtual simulation and drew coordinates and routes for the UAV operating. Secondly, UAV followed this routes and took linear and continuous views that are real scenes. As a result, it drew 3D simulation could illustrate and control the changing of environments such as the forest density and seasonal variations. Thus, comparing both of them shows efficiently landscape analysis. Thirdly, the study compared virtual and real landscape. Using this 3D modelling, this paper able to elaborate heritage environment and surrounding which omitted by view point analysis. Although this study has limitation practice and exercise on the field, the results and suggestions contribute to the various historic heritage managements and conservations. Moreover, it helps to explain the complex and dimensional landscape analysis.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.297-305
• /
• 2014

In this study, we installed the Automatic Identification System (AIS) receiver on the Ieodo Ocean Research Station (IORS) from November 21 to 30, 2013 in order to monitor marine traffic and fishery activity in the jurisdictional sea area. The collected AIS raw data consist of static data report (MMSI, IMO NO., Call Sign, Ship Name, etc.) and position information report (position, speed, course, etc.), and the developed program was applied to classify ships according to ship flag and type information. The nationalities are released from the first three-digit numbers (MID) of MMSI, but in general most of small ships do not send an exact ship flag through Class B type AIS, a simplified and low-power equipment. From AIS data with flag information, ships under the flag of China had the highest frequency and the second was Korean flag, while in ship type cargo and fishing vessels were dominant in sequence. As for the ships without flag information, we compared the tracks with others in order to estimate ship flags. It can be said that fleets of ships with Chinese frequently appear sail together for fisheries over the waters, because the unknown ships followed a similar moving pattern with Chinese fishing vessels.

• Journal of Intelligence and Information Systems
• /
• v.8 no.1
• /
• pp.141-157
• /
• 2002

extensible Markup Language (XML) is a new markup language for data exchange on the Internet. In this paper, we propose a language extensible Rule Markup Language (XRML) which is an extension of XML. The implicit rules embedded in the Web pages should be identifiable, interchangeable with structured rule format, and finally accessible by various applications. It is possible to realize by using XRML. In this light, Web based Knowledge Management Systems (KMS) can be integrated with rule-based expert systems. To meet this end, we propose the six design criteria: Expressional Completeness, Relevance Linkability, Polymorphous Consistency, Applicative Universality, Knowledge Integrability and Interoperability. Furthermore, we propose three components such as RIML (Rule Identification Markup Language), RSML (Rule Structure Markup Language) and RTML (Rule Triggering Markup Language), and the Document Type Definition DTD). We have designed the XRML version 0.5 as illustrated above, and developed its prototype named Form/XRML which is an automated form processing for disbursement of the research fund in the Korea Advanced Institute of Science and Technology (KAISI). Since XRML allows both human and software agent to use the rules, there is huge application potential. We expect that XRML can contribute to the progress of Semantic Web platforms making knowledge management and e-commerce more intelligent. Since there are many emerging research groups and vendors who investigate this issue, it will not take long to see XRML commercial products. Matured XRML applications may change the way of designing information and knowledge systems in the near future.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.203-209
• /
• 2007

In order to promote utilization of the Yangha (Zinger mioga Rosc.) as functional food and natural spices, and 95.93%, from the dried one 7.63%, and from powder 9.81%, respectively. Crude protein content from the Yangha powder was 11.21%, and contents of crude fat, crude ash and crude fiber were 2.44%,10.78%, and 14.47%, respectively. Most of compositions from Yangha powder were higher than those from raw and the dried one, except fer water content. Antioxidative effect was investigated through Rancimat and DPPH methods. Oxidative stability of Yangha powder was the highest of4.21Al. Furthermore, the free radical scavenging activity of Yangha powder (76.61%) was higher than that of raw (49.35%) or the dried one (61.78%). Volatile flavor compounds of Yangha was extracted by steam distillation and extraction method. The extracts were analyzed and identified by gas chromatography and GC-MS spectrometry. One hundred twenty two volatile flavor components were identified, and the major component was terpene compounds including ${\alpha}$-pinene, ${\beta}$-pinene, ${\beta}$-phellandrene, 1,4-terpineol, and ${\beta}$-terpinene.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.981-986
• /
• 2020

The Internet of Things refers to a space-of-things connection network configured to allow things with built-in sensors and communication functions to interact with people and other things, regardless of the restriction of place or time.IoT is a network developed for the purpose of services for human convenience, but the scope of its use is expanding across industries such as power transmission, energy management, and factory automation. However, the communication protocol of IoT, MQTT, is a lightweight message transmission protocol based on the push technology and has a security vulnerability, and this suggests that there are risks such as personal information infringement or industrial information leakage. To solve this problem, we designed a synchronous MQTT security channel that creates a secure channel by using the characteristic that different chaotic dynamical systems are synchronized with arbitrary values in the lightweight message transmission MQTT protocol. The communication channel we designed is a method of transmitting information to the noise channel by using characteristics such as random number similarity of chaotic signals, sensitivity to initial value, and reproducibility of signals. The encryption method synchronized with the proposed key value is a method optimized for the lightweight message transmission protocol, and if applied to the MQTT of IoT, it is believed to be effective in creating a secure channel.