• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.57-61
• /
• 2002

We design Collision Avoidance System using model vehicle. The purpose of this system(Collision Avoidance System) is to maintain continuously constant distance between a forward running vehicle and a following automatic guided vehicle(AGV). For this system, we design modeling of vehicle and observe this through simulation. By sing super sonic sensors to measure the distance between vehicles and controller using 80c196kc for changing velocity of motor, we design Collision Avoidance System as maintaining continuously constant distance between vehicles.

• The Journal of Korea Robotics Society
• /
• v.5 no.2
• /
• pp.120-126
• /
• 2010

This paper presents to study the path tracking method of AGV(autonomous guided vehicle) which has a laser guidance system. An existing automatic guided vehicles(AGVs) which were able to drive on wired line only had a automatic guidance system. However, the automatic guidance systems that those used had the high cost of installation and maintenance, and the difficulty of system change according to variation of working environment. To solve such problems, we make the laser guidance system which is consisted of a laser navigation and gyro, encoder. That is robust against noise, and flexible according to working environment through sensor fusion. The laser guidance system can do a perfect autonomous driving. However, the commercialization of perfect autonomous driving system is difficult, because the perfect autonomous driving system must recognize the whole environment of working space. Hence, this paper studied the path tracking of AGV using laser guidance system without wired line. The path tracking method is consisted of virtual path generation method and driving control method. To experiment, we use the fork-type AGV which is made by ourselves, and do a path tracking experiments repeatedly on same experimental environment. In result, we verified that proposed system is efficient and stable for actual fork-type AGV.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.23
• /
• pp.47-55
• /
• 1991

In automated assembly line, an automatic guided vehicle system(AGVS) represents a mire versatile means of moving materials automatically. In this paper, the vehicles not only provide the transportation medium between workstations but also as mobile workstations. The objective for the developed model is the determination of the appropriate time to control AGV based assembly line in order to minimize production makespan while maximizing the efficient use of vehicles. In this paper, we consider the finished goods of two types which are produced in assembly line. The assembly line is considered with and without queue. Because no buffer are present in case 1. this model seeks to determine the point in time at which vehicles should be launched in the assembly line without experiencing a delay. The case 2 model also seek to determine the vehicle launch times while minimizing production makespan. The assumption in this model is that the maximum queue size cannot exceed 1 at any time.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1076-1081
• /
• 2004

In this study, we have developed the simulation tool in order to investigate driving trajectory of AGV for container transport. AGV for container transport is different from the indoor AGV in that it is a large size structure at being loaded the weight of 40 ton. And AGV for container transport is applied to front wheel steering, rear wheel steering, all wheel steering, and crap steering. Therefore, we have developed the simulation tool considering dynamic problems and center of turning in accordance with four way of steering modes. Throughout some computer simulations, we have confirmed that this tool is useful to analysis dynamic problems and to calculate minimum radius of turning for large size vehicles.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.169-173
• /
• 2000

현재 컨테이너 터미널에서 사용되고 있는 하역 장비들은 크게 하역작업을 수행하는 크레인과 컨테이너를 운반하는 트레일러, 컨테이너의 하역상태를 파악하는 모니터링 시스템으로 구분할 수 있다. 각각의 장비들은 수동으로 동작되며, 모니터링 시스템에서는 컨테이너의 위치 및 수량 등을 파악한다. 이런 시스템 하에서는 모든 항만 하역 장비들을 사람이 일일이 수동으로 조작함으로써 많은 인력이 필요하다. 또한, 각 하역장비들의 상태를 평면적인 2차원 화면으로만 보여주므로써 모니터링 시스템에 대한 현실감이 떨어진다. 이와 같은 단점을 보완하기 위해 컨테이너를 자동으로 운반하는 AGV를 도입하고 트랜스퍼 크래인과 컨테이너 크레인의 일부분을 자동화하여 작업능률을 향상시키고, 여기에 3차원으로 표현된 VR 시스템을 도입하여 각 하역장비들에 대한 세세한 동작까지를 모니터링함으로써 사용자가 현장에 있는 것과 유사한 느낌을 가질 수 있도록 하였다. 본 논문에서는 이러한 3차원 VR시스템과 모형으로 만들어진 AGV와 컨테이너 크레인, 트랜스퍼 크레인간의 유기적인 데이터 송,수신 및 안정적인 통신을 위해 데이터 포맷에 대한 연구를 하였다. 이런 데이터 포맷의 결정은 손실 없는 통신을 보장하며 나아가 정확한 모니터링을 보장할 것이다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.19
• /
• pp.73-78
• /
• 1989

This paper concerns the production model that the Automatic Guided Vehicles(AGVs) is used as transporters in assembly line. The model suggests that assembly parts may inter the beginning of the line in multiple units instead entering one unit at a time. Costs are occured in proportion to the number of vehicle on the line and job flow time. Here, the objective of this model is to determine the number of vehicle to minimize the total cost for M products production. Theoretical results are proved which lead to the development of algorithm for solution search. The solution search procedure is illustrated by a numerical example.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.36-41
• /
• 2012

This paper presents torque control of DC motor using the velocity profile based acceleration/deceleration controller for automatic guided vehicles (AGVs). This technique has some advantage; to reduce the damage of motors and to extend the life time of motors. First, we generate velocity profiles for three cases and design the state feedback controller using the generated velocity profile as a reference. The state feedback controller has servo system for solving regulation problem. For the verification, we apply the proposed method to control a cart position and shows some simulation result.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1303-1310
• /
• 1999

In this paper, the Timed Petri-Nets(TPN) modeling of Modular Cell Manufacturing Systems(MCMS) was investigated to overcome the limit of batch mode operation, which has been one of the most popular manufacturing types to produce an extensive industrial output and to be able to adopt to suitable and quickly changing manufacturing environments. A model of the MCMS was developed in reference to the actual TFT-LCD manufacturing system. TFT-LCD manufacturing system is not mass-productive in batch mode, but it operates in the form of MCMS which consists of a sequence of several cells with four processes of operation, including those of color filter(C/F), TFT, cell, and module. The cell process is further regrouped in those of Front-End and Back-End. For the Back-End cell process, it is reconstructed into a virtual model, consisting of three cells. The TPN modeling encompasses those properties, such as states and operations of machines, the number of buffers, and the processing time. The performance of the modeling was further examined in terms of scheduling system. The productivity in each cells was examined with respect to the change of failure rate of the cell machines and Automatic Guided Vehicles(AGV) using simulation by TPN.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.141-150
• /
• 2001

Manufacturing conb'ol applications consist of concurrent active components such as robots, AGV's (Automatic Guided Vehicles), and conveyors. Running of manufacturing control programs is interactions among those components. We can enhance the productivity and extendability of manufacturing control applications by using the object-oriented teclmology that models those components as reusable objects. But the objects in current object-oriented technology that encapsulate state and behavior infonnation are passive in a sense that those respond only when messages are sent to them. In this paper, we introduce the Distributed Active Object Systems (DAGS) approach that SUPPOltS active objects. Since active objects encapsulate control infonnation in addition to state and behavior information under COREA/Java-based distributed environment, they can represent manufacturing control components better than the objects in ordimuy object-oriented technology. TIus control infonnation provides an object with a featme that can monitor its own status as well as other object's status connected by intelface valiables. Active objects can initiate a behavior according to the change of those status. Therefore, we can sb-uctmally assemble self-initiating active objects by using intelface variables to construct a system without describing bow to control distributed objects by using message passing. As the DAOS approach supports object composability, we can enhal1ce the productivity and extendability of disbibuted manufactming control applications even better than the ordil1alY object-oriented approach. Also, the DAOS approach supports better component reusability with active objects that encapsulate control information .