• 한국재료학회지
• /
• 제20권1호
• /
• pp.31-36
• /
• 2010

Methylene blue (MB) was degraded by $TiO_2$ and ZnO deposited on an activated carbon fiber (ACF) surface under UV light. The ACF/$TiO_2$ and ACF/ZnO composites were characterized by BET, SEM, XRD, and EDX. The BET surface area was related to the adsorption capacity for composites. The SEM results showed that titanium dioxide and zinc oxide are distributed on the ACF surface. The XRD results showed that the ACF/$TiO_2$ and ACF/ZnO composites contained a unique anatase structure for $TiO_2$ and a typical hexagonal phase for ZnO respectively. These EDX spectra showed the presence of peaks of Ti element on ACF/$TiO_2$ composite and peaks of Zn element on the ACF/ZnO composite. The blank experiments for either illuminating the MB solution or the suspension containing ACF/$TiO_2$ or ACF/ZnO in the dark showed that both illumination and the catalyst were necessary for the mineralization of organic dye. Additionally, the ACF/$TiO_2$ composites proved to be efficient photocatalysts due to degradation of MB at higher reaction rates. The addition of an oxidant $([NH_4]_2S_2O_8)$ led to an increase of the degradation rate of MB for ACF/$TiO_2$ and ACF/ZnO composites.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.136-141
• /
• 2010

ACF/ZnO photocatalyst was synthesized by a sol-gel method using activated carbon fiber (ACF) and Zn $(NO_3)_2$ as precursors. Samples were characterized by Brunauer-Emmett-Teller measurements (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The XRD results showed that ACF/ZnO composites only included a hexagonal phase by heat-treated temperature at $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, and $700^{\circ}C$. The SEM analysis revealed that the ACF/ZnO composites did not exhibit any morphological changes of the catalyst surface according to the different heat-treated temperatures. The photocatalytic activity of the samples was tested for degradation of methylene blue (MB) solutions under ultraviolet (UV) light and ultrasonication respectively. The results showed that the photocatalytic activity of ACF/ZnO composites heat-treated at $500^{\circ}C$ was higher than other samples, which is ascribed to the fine distribution of ZnO particles on the surface of the ACF. In addition, an ultrasound of low power (50 W) was used as an irradiation source to successfully induce ACF/ZnO composites to perform sonocatalytic degradation of MB. Results indicated that the sonocatalytic method in the presence of ACF/ZnO composites is an advisable choice for the treatments of organic dyes.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.142-150
• /
• 2009

In this paper, non-treated ACF (Activated Carbon Fiber) /$TiO_2$ and Zn-treated ACF/$TiO_2$ were prepared. The prepared composites were characterized in terms of their structural crystallinity, elemental identification and photocatalytic activity. XRD patterns of the composites showed that the non-treated ACF/$TiO_2$ composite contained only typical single and clear anatase forms while the Zn-treated ACF/$TiO_2$ contained a mixed anatase and rutile phase with a unique ZnO peak. SEM results show that the titanium complex particles are uniformly distributed on and around the fiber and that the titanium complex particles are more regularly distributed on and around the ACF surfaces upon an increase of the $ZnCl_2$ concentration. These EDX spectra show the presence of peaks from the C, O and Ti elements. Moreover, peaks of the Zn element were observed in the Zn-treated ACF/$TiO_2$ composites. The prominent photocatalytic activity of the Zn-treated ACF/$TiO_2$ can be attributed to the three different effects of photo-degradation: doping, absorptivity by an electron transfer, and adsorptivity of porous ACFs between the Zn-$TiO_2$ and Zn-ACF.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.269-274
• /
• 2013

ACF and ZnO modified $TiO_2$ composite materials (ZnO-ACF/$TiO_2$) were prepared by a sol-gel method. The composites were characterized by X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis and scanning electron microscope (SEM) analysis. A methyl orange (MO) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of the MO was determined using UV spectrophotometers. An increase in the photocatalytic activity was observed and attributed to an increase of the photo-absorption effect by the ZnO and the cooperative effect of the ACF.

• 자원환경지질
• /
• 제34권1호
• /
• pp.55-70
• /
• 2001

영광-김제 지역에는 두 가지 형의 화강암류가 분포한다. 하나는 NE-SW방향의 광주단층계에 연하여 발달된 정읍, 고창엽리상화강암이고, 다른 하나는 광주단층계의 서편으로 발달괸 변형 되지 않은 김제화강암과 영광화강암이다. $SiO_2$의 함량은 영광화강암은 62.8~74.0% 고창엽리상화강암은 64.5~74.4%, 정읍엽리상화강암은 64.5~70.2% 김제화강암은 63.4~72.0% 으로, 이들 화강암류는 중성암과 산성암 영역에 포함된다. 하커의 변화도에서 $SiO_2$의 증가에 따라 $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$, $P_2O_{5}$, MnO는 감소하는 경향을 보이고 $K_2$O는 증가하는 경향을 보이는데, 이와 같은 결과는 화강암류에서 보이는 정상적인 분화경향을 나타낸다. AFM 삼각도에서 보면 각 화강암류는 칼크 -알칼린계열에 속함을 알 수 있다. 화강암류들을 norm값으로 구분한 Qz-Or-Pl 삼각도와 An-Ab-Or삼각도에 도시해보면, 각각에서 화강섬록암과 화강암의 영역에 도시됨을 알 수 있다. 미량성분은 $SiO_2$의 증가에 따라 Ba, Co, Li, Nb, Zn, Rb는 증가하는 경향을 보여주고, ACF diagram 과 $Na_2O$ vs $K_2O$ 변화도에서 연구지역의 화강암류는 I-type에 속함을 알 수 있다.

• 자원환경지질
• /
• 제32권6호
• /
• pp.585-597
• /
• 1999

Plutomic rocks of the Mabogsan, located in the southestern part of the Koheung Eup are composed of granite gneiss, diorite, biotite grantie and granophyre. On the basis of Rb-Ba-Sr diagram, the diorires are plotted from granodiorite to quartz diortie, the biotite granites from granodiortie to anomalous granite and the granophyres in normal granite filed. The plutonic rocks tend to show the I-type characteristics in terns of ACF diagram, $K_2O-Na_2O$ diagram and $Al_2O_3/Na_2O+K_2O+CaO$ diafram, while have values of ilmenite series in magnetic subseptibility. The plutons could have formed in the tectonic environment of VAG+COLG+ORG based on the silica vs. trace element diagrams. Gold contents with major and trace elements have been determined for 21 granophyres, 13 biotite granites and 4 diorites are; (1) for the diorite, the rangs is 0.508~1.73 ppb with an average of 0.5ppb;(2) for the biotite granites, the range is 0.449~13.5ppb with an average of 3 ppb;(3)for the granphyres, the range is 0.508~23.1ppb with an average of 4.5ppb. The gold content of the studied plutons tends to increase from mafic to felsic rocks. Gold contents tend to show positive correlations with those of Ag and Zn, negative correlations with those of As, Ba and Rb. The copper contents of the plutons are comparatively high. Average copper contents of diorite, biotite granite and granophyre are 710ppm, 587ppm and 484ppm, respectively. The copper contents of the plutons tend to have good correlations with those of Ag, Bi and Pb.