• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.898-906
• /
• 2002

Antilock Brake System (ABS) is designed to prevent wheels from being locked-up under emergency braking of a vehicle. Therefore it improves directional stability of the vehicle, shortens stopping distance, and enhances maneuvering during braking, regardless of road conditions. Hardware In-the-Loop Simulation (HILS) is an effective tool for design Performance evaluation and test of vehicle subsystems such as ABS, active suspension, and steering systems. This paper describes a HILS model for ABS/ ASR(Acceleration Slip Regulation) system applications. A fourteen degrees-of-freedom vehicle dynamics model is simulated in an alpha-chip processor board. The proposed HILS system is tested with a basic ABS control algorithm. The design and implementation of HILS system for the ABS ECU(Electronic Control Unit) development of commercial vehicle are presented. The results show that the proposed HILS system can be used to test the performance, stability, and reliability of a vehicle under braking.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.42-47
• /
• 2015

This paper studies on the design of a servo controller for an antilock brake system(ABS) based on the car tire model. First, a nonlinear differential equation of the car tire is constructed and its linearization model is obtained by Taylor's series. Second, a servo controller based on the mathematical model is analytically designed to obtain the maximum brake force, where the tire velocity and the slip ratio of car tire are respectively controlled to the given command values. Third, it is theoretically shown that the proposed control algorithm has good usefulness in ABS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2345-2347
• /
• 2000

ABS(Antilock Brake System) prevents the wheels from "locking" and improve "handling" during braking. Currently, safety and environmental issues are a major concern in the automotive industry. ABS has become the vital brake system. ABS is composed of sensors for wheel speed, a pressure modulator for controlling the brake pressures in the wheel brake cylinders, and an electronic control unit(ECU) which evaluates the signals from the wheel speed sensors and converts these to commands to control the pressure of modulator. In this paper, ECU developed for commercial vehicles is described. Detection of wheel slip, control algorithms of ABS, and diagnosis method of ECU are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.609-611
• /
• 2000

ABS(Antilock Brake System), Prevents the wheels from "locking" and improve steering during braking. Currently, safety and environmental issues are a major concern in the automotive industry. ABS has become the vital brake system HILS (Hardware In-the-Loop Simulation) is an effective tool for design. performance evaluation and test of developed vehicle subsystems such as ABS. suspension. and steering systems. This paper describes a HILS model for an ABS/ASR application Also the design and implementation of HILS system for development of the ABS ECU(Electronic Centre) Unit) for commercial vehicle are presented.

• 한국항공운항학회지
• /
• 제25권2호
• /
• pp.18-24
• /
• 2017

Results of the experimental research are described in this thesis, which are about braking characteristics of aircraft ABS brake system with different ground conditions. Dynamo-tests were conducted with the state of the application aircraft condition and with two different ground conditions. The Braking characteristics on each ground condition were drawn from the results of occurrence of skid, braking distance and deceleration. The braking performance of the application aircraft could be anticipated and the efficient range of braking operation could be set with those results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.125-125
• /
• 2000

An Empirical approach to determine a road-surface condition is presented The road-surface condition thus provided includes the detection of not only friction coefficient, but also abrupt surface-profile changes such as pitfalls and bumpers The former plays a key role in establishing the appropriate control strategy, while the latter allows to minimize unnecessary brake intervention induced by the aforementioned jut. In this paper, we use an empirically chosen variable, namely. the time-rate of change of vehicle speed estimated from the point where ABS engaged to the point where measurement taken Experimental results shoe that the proposed method is effective to infer various control variables critical for the control of ABS.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.357-360
• /
• 1997

This paper presents a new anti-lock brake system(ABS) using electro-rheological(ER) valve actuators for the wheel slip control. The hydraulic dynamic model of the automotive brake system is formulated by incorporating electric field-dependent Bingham properties of ER fluid obtained experimentally. The brake system designed by this hydraulic model is able to control wheel slip by controlling the intensity of electric field which tunes the braking torque. The control fields of the ER valve to command desired wheel slip are determined by a sliding mode controller. A comparison between the proposed brake system and the conventional brake system is made by providing with computer simulations of vehicle motions under ABS performance requirement condition.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.14-23
• /
• 2010

This paper analyzes braking performance of ABS with Sliding Mode Controller, which is designed in this research and compared with that of a commercial ABS-ECU only. HILS system for this paper has an existing hydraulic brake line with an ECU of commercial passenger vehicle and it is designed to be cooperated with Sliding Mode Controller and hydraulic line. This paper shows the simulation results to meet the target slip ratio on the various road conditions and displays the performance with Sliding Mode Controller has an improvement than a commercial ABS.