• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.5
• /
• pp.431-441
• /
• 2001

To develop the low-temperature and long-term fermented kimchi, kimchi was prepared according to the recipe of a specific ratio of major and minor ingredients and adjusted its salinity to 3.7%. Prepared kimchi fermented at $15{\pm}1^{\circ}C$ for 24 hours and transferred and fermented in a refrigerator only used to make low-temperature and long-term fermented kimchi at $-1{\pm}1^{\circ}C$ for 30 weeks. During 30 weeks of fermentation the changes in physicochemical and microbiological properties of low-temperature and long-term fermented kimchi were studied. The initial pH of 6.47 decrease gradually and dropped to pH 4.0 after 14 weeks of fermentation, and then it maintained at same level. Acidity increased to 0.49% on 2 weeks of fermentation and kept at 0.47 $\sim$0.50% during 2 to 30 weeks fermentation. Salinity was slightly increased at early stage and started to decrease on 4 weeks of fermentation, and then it did not change. The change of reducing sugar content was closely related to the trend of pH change with a very high correlation coefficient(r =0.912). Lactic acid, citric acid, malic acid, succinic acid and acetic acid were major organic acids contained in low-temperature and long-term fermented kimchi. Vitamin C content decreased at initial stage of fermentation and then slightly increased up to the maximum of 22.3 mg% on 8weeks of fermentation. In color measurement, L value continued to increase during the fermentation and reached at the highest of 55.45 on 22 weeks of fermentation, and a and b values of 3.62 and 4.54 also increased to 31.26 and 37.32 on 30 weeks of fermentation, respectively. Total microbial count increased slowly from beginning and was the highest on 4 weeks of fermentation, and then began to decrease slowly. Count of Lactobacillus spp. was highest after 6weeks, but count of Lactobacillus spp. was highest on 2 weeks of fermentation, and then both showed a slow decrease. Yeast count wasn't increased until 4 weeks of fermentation and then increased rapidly to get the highest on 10 weeks of fermentation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.05a
• /
• pp.38-44
• /
• 2000

To determine the optimum sowing date and nursery period in Alisma piantago in the southern area of Korea, Alisma plantago local cultivar was grown under three different sowing dates and nursery periods. The plant height, leaf width and leaf length at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 12.1cm, 2.5cm and 3.1cm respectively and it shows tess decrease than that of plant height, leaf width and leaf length with 12.3cm, 2.6cm and 3.2cm respectively which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows less decrease than that of plant height, leaf width and leaf length with 15.2cm, 3.1cm and 5.2cm respectively at the area sown on the seedbed in July 10 and condected the growing seedling in the same date. The stem length, number of stems and diameter of root at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 31cm, 11 and 3.7cm respectively and it shows more increase than that of stem length, number of stem and diameter of and on the other hand shows tess decrease than that of stem length, number of stems and diameter of root with 30cm, 10cm, 35cm respectively which was sown on the seedbed in 30 days, and on the other hand shows less decrease than that of stem length, number of stems and diameter of root with 32cm,13cm,3.9cm respectively at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date, The fresh yield of roots at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 431.4Kg/10a and it shows more increase of 26.9Kg than that of fresh yield of root with 410.59g110a which was sown on the seedbed in lune 20an4 carried out the growing seedling in 30 days, and it also shows more increase of 7Kg than that of fresh yield of root with 430.4Kg/10a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. The dry yield of roots at the area on the seedbed in June 30 and conducted the growing seedling in 30 days is 351.9Kg110a which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows more increase of 16.4Kg than that of dry yield of root with 335.4Kg110a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. Therefore, the seedling period of proper seedbed for high yield bumper crop of Alisma plantago for exporting to Japan is June 30 and the number of days for seedling is 30 days.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.425-431
• /
• 2015

LNG (liquefied natural gas) is considered the best alternative eco-fuel, and many studies on the LNG fuel system have been performed to use LNG as the fuel for ships. For the LNG fuel supply system, natural gas transfers from the vaporizer to the engine in the gaseous state with a temperature of $50^{\circ}C$ and a pressure of 35MPa. Therefore, a structural safety evaluation of the double-walled pipelines considering thermal load is essential. In this article, an uniaxial tensile test for super duplex stainless steel, material for double-walled pipe, according to the annealing time was carried out to analyze the thermal effect. In addition, thermo-structural analysis of the high temperature-high pressure double-walled pipe with fixed supports that are now used widely was carried out to evaluate the structural safety. To minimize stress concentration of the connection point between the support and inner pipe, the shapes of the new type support that can slip through inner pipe were proposed, and the supports which has best structural performance was selected using the results from the thermo-structural analyses of new supports and an analysis of the whole double-walled pipeline was performed to ensure structural safety. These results can be used as a database for the design of double-walled pipelines and sliding support.

• Molecules and Cells
• /
• v.28 no.5
• /
• pp.431-439
• /
• 2009

Rice Oryza sativa accelerated cell death and resistance 1 (OsACDR1) encodes a putative Raf-like mitogen-activated protein kinase kinase kinase (MAPKKK). We had previously reported upregulation of the OsACDR1 transcript by a range of environmental stimuli involved in eliciting defense-related pathways. Here we apply biochemical, gain and loss-of-function approaches to characterize OsACDR1 function in rice. The OsACDR1 protein showed autophosphorylation and possessed kinase activity. Rice plants overexpressing OsACDR1 exhibited spontaneous hypersensitive response (HR)-like lesions on leaves, upregulation of defense-related marker genes and accumulation of phenolic compounds and secondary metabolites (phytoalexins). These transgenic plants also acquired enhanced resistance to a fungal pathogen (Magnaporthe grisea) and showed inhibition of appressorial penetration on the leaf surface. In contrast, loss-of-function and RNA silenced OsACDR1 rice mutant plants showed downregulation of defense-related marker genes expressions and susceptibility to M. grisea. Furthermore, transient expression of an OsACDR1:GFP fusion protein in rice protoplast and onion epidermal cells revealed its localization to the nucleus. These results indicate that OsACDR1 plays an important role in the positive regulation of disease resistance in rice.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.431-447
• /
• 2021

Recently, the use of high-resolution satellites is increasing in many areas. In order to supply useful satellite images stably, it is necessary to establish automatic precision geometric correction technic. Geometric correction is the process that corrected geometric errors of satellite imagery based on the GCP (Ground Control Point), which is correspondence point between accurate ground coordinates and image coordinates. Therefore, in the automatic geometric correction process, it is the key to acquire high-quality GCPs automatically. In this paper, we proposed iterative precision geometry correction method. we constructed an image pyramid and repeatedly performed GCP chip matching, outlier detection, and precision sensor modeling in each layer of the image pyramid. Through this method, we were able to acquire high-quality GCPs automatically. we then improved the performance of geometric correction of high-resolution satellite images. To analyze the performance of the proposed method, we used KOMPSAT-3 and 3A Level 1R 8 scenes. As a result of the experiment, the proposed method showed the geometric correction accuracy of 1.5 pixels on average and a maximum of 2 pixels.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1318-1325
• /
• 1997

Background : Since the late 1960s, mechanical ventilation has been accomplished primarily using volume controlled ventilation(VCV). While VCV allows a set tidal volume to be guaranteed, VCV could bring about excessive airway pressures that may be lead to barotrauma in the patients with acute lung injury. With the increment of knowledge related to ventilator-induced lung injury, pressure controlled ventilation(PCV) has been frequently applied to these patients. But, PCV has a disadvantage of variable tidal volume delivery as pulmonary impedance changes. Since the concept of combining the positive attributes of VCV and PCV(dual control ventilation, DCV) was described firstly in 1992, a few DCV modes were introduced. Pressure-regulated volume control(PRVC) mode, a kind of DCV, is pressure-limited, time-cycled ventilation that uses tidal volume as a feedback control for continuously adjusting the pressure limit However, no clinical studies were published on the efficacy of PRVC until now. 'This investigation studied the efficacy of PRVC in the patients with unstable respiratory mechanics. Methods : The subjects were 8 mechanically ventilated patients(M : F=6 : 2, $56{\pm}26$ years) who showed unstable respiratory mechanics, which was defined by the coefficients of variation of peak inspiratory pressure for 15 minutes greater than 10% under VCV, or the coefficients of variation of tidal volume greater than 10% under PCV. The study was consisited of 3 modes application with VCV, PCV and PRVC for 15 minutes by random order. To obtain same tidal volume, inspiratory pressure setting was adjusted in PCV. Respiratory parameters were measured by pulmonary monitor(CP-100 pulmonary monitor, Bicore, Irvine, CA, USA). Results : 1) Mean tidal volumes($V_T$) in each mode were not different(VCV, $431{\pm}102ml$ ; PCV, $417{\pm}99ml$ ; PRVC, $414{\pm}97ml$) 2) The coefficient of variation(CV) of $V_T$ were $5.2{\pm}3.9%$ in VCV, $15.2{\pm}7.5%$ in PCV and $19.3{\pm}10.0%$ in PRVC. The CV of $V_T$ in PCV and PRVC were significantly greater than that in VCV(p<0.01). 3) Mean peak inspiratory pressure(PIP) in VCV($31.0{\pm}6.9cm$ $H_2O$) was higher than PIP in PCV($26.0{\pm}6.5cm$ $H_2O$) or PRVC($27.0{\pm}6.4cm$ $H_2O$)(p<0.05). 4) The CV of PIP were $13.9{\pm}3.7%$ in VCV, $4.9{\pm}2.6%$ in PVC and $12.2{\pm}7.0%$ in PRVC. The CV of PIP in VCV and PRVC were greater than that in PCV(p<0.01). Conclusions : Because of wide fluctuations of VT and PIP, PRVC mode did not seem to have advantages compared to VCV or PCV in the patients with unstable respiratory mechanics.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.424-431
• /
• 2016

LID facilities like bio-retention cells is applied to manage stormwater. LID concept becomes an important part in stormwater management, and the clear understanding of hydrologic performance and hydrologic impact on the corresponding catchment has been needed. In this study, the application of flow duration curves as design strategy is investigated. Bio-retention cells like many LID facilities are installed to reproduce natural hydrologic processes. In this study, the attempt to determine the size of a bio-retention cell is carried out to satisfy the flow duration criteria. From the results, it is shown that "5 mm * the area of a target catchment" which is the current facility design capacity is valid for the drainage area with 20-30% impervious rate. In the 100% impervious catchment where LID facilities are typically installed, the design capacity to intercept stormwater of approximately 47 mm depth is required to reproduce natural flow duration curves. This means that about 11% of the target catchment area should be allocated as a bio-retention cell. However, the criteria of the design capacity and facility surface area should be set at the possible implementation conditions in reality, and site-specific hydrologic characteristics of a target catchment should be considered.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.5
• /
• pp.427-431
• /
• 2007

The bronchus-asociated lymphoid tissue(BALT) lymphoma is a low-grade primary malignant lymphoma that originates from bronchus associated lymphoid tissue. A 67-year-old woman was admitted for evaluation of cough, sputum, rhinorrhea which had persisted for one month. Physical examination showed decreased breathing sound on the left upper lung field. High resolution chest computed tomography demonstrated consolidation which showed air-bronchogram and surrounding ground glass opacity in left upper lobe. These findings implicated inactive tuberculosis, organizing pneumonia, or bronchiolo-alveolar carcinoma. The histologic findings from percutaneous needle aspiration biopsy revealed aggregated atypical small lymphoid cells with lymphoepithelial lesions. With immunohistochemical staining, the atypical lymphoid cells reacted positively with CD 20 antibody and negatively with CD 3 antibody. Thus, we could diagnosed her as a patient with BALT lymphoma. After left upper lobectomy, she has been well without recurrence of the disease for 14 months. In this country of Republic of Korea, it was the 1st case of BALT lymphoma surgically treated when histological diagnosis had been done. Based on this case, we wanted to demonstrate the importance of early histological diagnosis and treatment of BALT lymphoma.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.431-442
• /
• 2009

The Software Product Line (SPL) engineering is one of the most promising software development paradigms. With Feature-Oriented Reuse Method (FORM), reusable and flexible components can be built to aid the delivery of various software products such as mobile phone and digital TV applications based on commonalities and variabilities identified during Feature modeling. Model Driven Architecture (MDA) is also an emerging technology which supports developing software products to work on different platforms with platform independent models (PIM). Combining advantages of these two approaches is helpful to build a group of software products which share common Features while working on various platforms. As first step to combine FORM with MDA, we extend UML2.0 with profiles by which FORM architectures and parameterized Statecharts can be modeled. Secondly, we provide rules to examine whether Features are allocated at positions of elements of Statecharts consistently between a Feature model and a parameterized Statechart. Some rules are designed to check the consistency between FORM architectures and parameterized Statecharts. A case study on an elevator control system is provided to demonstrate the feasibility of our modeling approach and consistency checking rules.