• BMB Reports
• /
• 제28권1호
• /
• pp.21-26
• /
• 1995

The Escherichia coli mixed-function serC-aroA operon encodes biosynthethic enzymes for unrelated pathways leading to the syntheses of serine and aromatic amino acids. It has been proposed that the operon is expressed in a cAMP-dependent manner. In this work experiments were performed to investigate the cAMP-dependent expression of the operon. Exogenous cAMP increased ${\beta}$-galactosidase synthesis in the $cya^+$ and cya strains harboring the serC-aroA-lac fusion plasmid. This enhancement was more dramatic in the $cya^-$ strain grown in a minimal medium. In a dot blot assay the serC-aroA mRNA content increased in a concentration-dependent pattern after the addition of exogenous cAMP. The activity of phosphoserine aminotransferase, encoded by the serC gene, apparently increased in E. coli cells after the addition of cAMP. All results obtained confirmed that the expression of the E. coli serC-aroA operon is positively regulated by cAMP at the level of transcription.

• 한국세라믹학회지
• /
• 제38권4호
• /
• pp.314-318
• /
• 2001

SiC-TiC composites have been fabricated by using a mechanochemical processing of a mixture of Si, Ti, and C at room temperature and subsequent hot pressing. TiC powders have been obtained by the mechanochemical processing of a mixture of Ti and C whereas SiC powders has not been obtained from a mixture of Si and C. By using the exothermic reaction between Ti and C, SiC-TiC powder could be obtained from the mixture of Si, Ti, and C using the mechanochemical processing for more than 12h. The X-ray diffraction analysis has shown that the powder subjected to the mechanochemical processing consisted of the particles having crystallite size below 10nm. Fully densified SiC-TiC composites have been obtained by hot-pressing of the powder at 1850$\^{C}$ for 3h and it has shown comparable mechanical properties to those of the SiC-TiC composites prepared from the commercially available SiC and TiC powders. Flexural strength of 560 MPa and fracture toughness of 4.8 MP$.$am$\_$1/2/ have been shown for the SiC-TiC composites with composition corresponding to 0.75:0.25:1 mole ratio of Si:Ti:C.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.493-501
• /
• 2019

In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C₃A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

• Carbon letters
• /
• 제5권4호
• /
• pp.164-169
• /
• 2004

Carbon-ceramic composites refer to a special class of carbon based materials which cover the main drawbacks of carbon, particularly its proneness to air oxidation, while essentially retaining its outstanding properties. In the present paper, the authors report the results of a systematic study made towards the development of C-SiC-$B_4C$ composites, which involves the effects of compositional parameters, namely, carbon-to-ceramic and ceramic-to-ceramic ratios, on the oxidation behaviour as well as other characteristics of these composites. The C-SiC-$B_4C$ composites, heat-treated to $1400^{\circ}C$, have shown that their oxidation behaviour at temperatures of 800~$1200^{\circ}C$ depends jointly on the total ceramic content and the SiC : $B_4C$ ratio. Good compositions of C-SiC-$B_4C$ composites exhibiting zero weight loss in air at temperatures of 800~$1200^{\circ}C$ for periods of 4~9 h, have been identified. Composites with these compositions undergo a weight gain or a maximum weight loss of less than 3% during the establishment of a protective layer at the surface of carbon in a period of 1~6 h. Significant improvement in the strength of C-SiC-$B_4C$ composites has been observed which increases with an increase in the total ceramic content and also with an increase in the SiC : $B_4C$ ratio.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.804-809
• /
• 2008

In this study, the cooling performance of a C/C composite material structure with metallic cooling tubes fixed by elastic force without chemical bonding was evaluated experimentally using combustion gas in a rocket combustor. The C/C composite chamber was covered by a stainless steel outer shell to maintain its airtightness. Gaseous hydrogen as a fuel and gaseous oxygen as an oxidizer were used for the heating test. The surface of these C/C composites was maintained below 1500 K when the combustion gas temperature was about 2900 K and heat flux to the combustion chamber wall was about 9 $MW/m^2$. No thermal damage was observed on the stainless steel tubes which were in contact with the C/C composite materials. Results of the heating test showed that such a metallic-tube-cooled C/C composite structure is able to control the surface temperature as a cooling structure(also as a heat exchanger), as well as indicating the possibility of reducing the amount of the coolant even if the thermal load to the engine is high. Thus, application of the metallic-tube-cooled C/C composite structure to reusable engines such as a rocket-ramjet combined cycle engine is expected.

• 대한수학회논문집
• /
• 제39권1호
• /
• pp.187-199
• /
• 2024

In the present paper, following the pullback approach to Finsler geometry, we study intrinsically the C^v-reducible and generalized C^v-reducible Finsler spaces. Precisely, we introduce a coordinate-free formulation of these manifolds. Then, we prove that a Finsler manifold is C^v-reducible if and only if it is C-reducible and satisfies the 𝕋-condition. We study the generalized C^v-reducible Finsler manifold with a scalar π-form 𝔸. We show that a Finsler manifold (M, L) is generalized C^v-reducible with 𝔸 if and only if it is C-reducible and 𝕋 = 𝔸. Moreover, we prove that a Landsberg generalized C^v-reducible Finsler manifold with a scalar π-form 𝔸 is Berwaldian. Finally, we consider a special C^v-reducible Finsler manifold and conclude that a Finsler manifold is a special C^v-reducible if and only if it is special semi-C-reducible with vanishing 𝕋-tensor.

• 대한수학회논문집
• /
• 제9권2호
• /
• pp.369-383
• /
• 1994

A complex n-dimensional Kahler manifold of constant holomorphic sectional curvature c is called a complex space form, which is denoted by $M_{n}$ (c). A complete and simply connected complex space form consists of a complex projective space $P_{n}$ C, a complex Euclidean space $C^{n}$ or a complex hyperbolic space $H_{n}$ C, according as c > 0, c = 0 or c < 0.(omitted)

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.61-76
• /
• 1997

Triacylglycerols of the seeds of Ginkgo biloba have been resolved by high-performace liquid chromatography(HPLC} in the silver-ion and reverse-phase modes. The fatty acids were identified by a combination of capillary gas chromatography and gas-chromatography /mass spectrometry as the methyl and /or picolinyl ester. The main components are $C_{18:2{\omega}6}$(39.0mol%), $C_{18:1{\omega}7}$(asclepic acid 21.5mol%), and $C_{18:1{\omega}9}$(oleic acid, 13.8mol%). Considerable amounts of unusual acid such as $C_{20:3{\Delta}^{5,11,14}$ (5.7mol%), $C_{18:2{\Delta}^{5,9}$(2.8mol%), and $C_{18:3}{\Delta}^{5,9,12}$(1.6mol%), were checked. In addition, an anteiso-branched fatty acid, 14-methylhexadecanoic acid, was also present as a minor component(0.9 mol%). The triacylglycerols were separated into 17 fractions by reverse-phase HPLC, and the fractionation was achieved according to the partition numnber(PN) in which a ${\Delta}^5$-non methylene interrupted double bond($^5$-NMDB) showed different behaviour from a methylene interrupted double bond in a molecule with a given cahinlength. Silver-ion HPLC exhibited excellent resolution in which fractions(23 fractions) were resolved on the basis of the number and configuration of double bonds. In this instance, the strength of interaction of a ${\Delta}^5$-NMDB system with silver ions seemed to be weaker than a methylene interrupted double bond system. The principal triacylglycerol species are as follows ; $(C_{18:2{\omega}6)2}/C_{18:1{\omega}7}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$, $C_{16:1{\omega}7}/C_{18:1{\omega}9}/C_{20:3}{\Delta}^{5,11,14}$, $C_{16:1{\omega}7}/C_{18:1{\omega}7}/C_{20:3}{\Delta}^{5,11,14}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $C_{18:1{\omega}9}/C_{18:2}{\Delta}^{5,5}/C_{20:3}{\Delta}^{5,11,14}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$ and $(C_{18:1{\omega}9)2}/C_{18:2{\omega}6}$, while simple triacylglycerols without $C_{18:2{\omega}6})_3$ were not present. Stereospecific analysis showed that fatty acids with ${\Delta}^5$-NMDB system and saturated chains were predominantly located at the site of sn-3 carbon of glycerol backbones. It is evident that there is asymmetry in the distribution of fatty acids in the TG molecules of Ginkgo nut oils.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.147-152
• /
• 2004

Aerobic cometabolism of cis-1,2-dichloroethylene (c-DCE) and c-DCE epoxide by a butane-grown mixed culture was evaluated. Transformation of c-DCE resulted in the concomitant generation of c-DCE epoxide. Chloride release studies showed nearly complete oxidative dechlorination of c-DCE (approximately 75%). Mass spectrometry confirmed tile presence of a compound with mass-to-charge-fragment ratios of 112, 83, 48, and 35. The values are in agreement with the spectra of a chemically synthesized c-DCE epoxide. Some evidences indicating the involvement of the monooxygenase in the transformation of c-DCE epoxide are: 1) $O_2$ requirement for c-DCE transformation and butane degradation; 2) butane inhibition on c-DCE transformation and vice versa; 3) the inactivation of c-DCE and c-DCE epoxide transformations by acetylene (a known monooxygenase inactivator); and 4) tire inhibition of c-DCE epoxide transformation by c-DCE.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.233-240
• /
• 1998

Recently, Hong-Jun Kim et al. introduced an improved process incapability index $C^*_{psk}$ by the transformation of the $C_{psk}{\;}C^*_{psk}$. A simple transformation of $C_{psk}$, can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C_{psk}$. By an identical conception, in this article a new process incapability index $C^*_{psk}$ for Non-Normal process can be proposed by the transformation of the process capability index $C^*_{psk}$. The motivation behind introduction of $C^*_{psk}$ is that process capability index $C^*_{psk}$ cannot give information of the process accuracy and precision. A significant result of this research that $C^*_{psk}$ for the case where the target value T is equal to the midpoint of the specification limits or not Is evaluated without respect to T. Accordingly, $C^*_({psk})$ will be propose a reasonable process incapability measure for Non-Normal process