• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.175-181
• /
• 2017

This paper describes the upgrade of an existing wave information retrieval algorithm by employing noise reduction in the pixel domain. Several algorithms for collecting wave information parameters from X-band radar image sequences including the wind field and current velocity have been developed over the past three decades. Using these algorithms, a band-pass filter (BPF) is applied to remove the non-wave contribution from the image spectra after the sea surface current velocity has been computed. However, such BPF designs have been both complex and insufficient in removing undesired components in X-band radar images. For this study, to improve the performance of wave information retrieval, an efficient noise reduction algorithm is incorporated into a regular wave information retrieval process. That is, the proposed algorithm was designed for operation in a more proper manner by effectively removing the undesired components in the pixel domain. Experiment results demonstrate that the proposed algorithm produces very close estimates to the buoy data records under undesirable noise conditions.

• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• Earthquakes and Structures
• /
• v.12 no.2
• /
• pp.153-163
• /
• 2017

The underlying goal of the present paper is to investigate soil and structural uncertainties on impedance functions and structural response of soil-shallow foundation-structure (SSFS) system using Monte Carlo simulations. The impedance functions of a rigid massless circular foundation resting on the surface of a random soil layer underlain by a homogeneous half-space are obtained using 1-D wave propagation in cones with reflection and refraction occurring at the layer-basement interface and free surface. Firstly, two distribution functions (lognormal and gamma) were used to generate random numbers of soil parameters (layer's thickness and shear wave velocity) for both horizontal and rocking modes of vibration with coefficients of variation ranging between 5 and 20%, for each distribution and each parameter. Secondly, the influence of uncertainties of soil parameters (layer's thickness, and shear wave velocity), as well as structural parameters (height of the superstructure, and radius of the foundation) on the response of the coupled system using lognormal distribution was investigated. This study illustrated that uncertainties on soil and structure properties, especially shear wave velocity and thickness of the layer, height of the structure and the foundation radius significantly affect the impedance functions, and in same time the response of the coupled system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.965-974
• /
• 2009

The current study reviews the formula used to calculate the stability of an artificial reef in the breaking wave zone of coastal waters. A comparison was carried out between the existing formula and a new formula that takes into account the water particle velocity in the breaking wave zone. Water particle velocity was analyzed using the Fluent (CADMAS-SURF) software program. The new formula took into various factors, including the difference in the drag coefficient due to the direction of the current and the ratio of distance between two reefs. The drag coefficient of the artificial reef due to the direction of the current was 0.84 when the distance ratio was 0.5. When the artificial reef was placed at 45 degree angle to the current, the product of the drag coefficient and the project area were 40 to 46 % greater than when the reef was placed at 90 degree angle. Our results regarding the stability of an artificial reef indicate that the new formula provides the designers of artificial reefs with a more rational and economic design rationale rather than the existing formula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.409-422
• /
• 2019

In this study, we carried out the 3D numerical simulation to investigate the hydraulic characteristics of Synchronous Edge wave known as the driving mechanism of beach cusp using the Tool Box called the ihFoam that has its roots on the OpenFoam. As a wave driver, RANS (Reynolds Averaged Navier-Stokes equation) and mass conservation equation are used. In doing so, we materialized short-crested waves known as the prerequisite for the formation of Synchronous Edge waves by generating two obliquely colliding Cnoidal waves. Numerical results show that as can be expected, flow velocity along the cross section where waves are focused are simulated to be much faster than the one along the cross section where waves are diverged. It is also shown that along the cross section where waves are focused, up-rush is moving much faster than its associated back-wash, but a duration period of up-rush is shortened, which complies the typical characteristics of nonlinear waves. On the other hand, due to the water-merging effect triggered by the redirected flow toward wave-diverging area at the pinacle of run-up, along the cross section where waves are diverged, offshore-ward velocity is larger than shore-ward velocity at the vicinity of shore-line, while at the very middle of shoaling process, the asymmetry of flow velocity leaned toward the shore is noticeably weakened. Considering that these flow characteristics can be found without exception in Synchronous Edge waves, the numerical simulation can be regarded to be successfully implemented. In doing so, new insight about how the boundary layer streaming occur are also developed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.6
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1237-1240
• /
• 2007

Tire noise is a major noise source at high speeds. One of the noise source is controlled by pattern and structure. Pattern noise is effected by the shape of tread. And the bending stiffness of tire is influenced to the resonance of tire‘s belt. But in high frequency region, FEA is not appropriated with application. So this paper discusses about wave propagation of tire. There has been much effort to verify the flexural wave velocity with structure design specification.

• Advances in nano research
• /
• v.7 no.5
• /
• pp.325-335
• /
• 2019

In the present study, nonlocal strain gradient theory (NSGT) is developed for wave propagation of functionally graded (FG) nanoscale plate in the thermal environment by considering the porosity effect. $Si_3N_4$ as ceramic phase and SUS304 as metal phase are regarded to be constitutive material of FG nanoplate. The porosity effect is taken into account on the basis of the newly extended method which considers coupling influence between Young's modulus and mass density. The motion relation is derived by applying Hamilton's principle. NSGT is implemented in order to account for small size effect. Wave frequency and phase velocity are obtained by solving the problem via an analytical method. The effects of different parameters such as porosity coefficient, gradient index, wave number, scale factor and temperature change on phase velocity and wave frequency of FG porous nanoplate have been examined and been presented in a group of illustrations.

• Earthquakes and Structures
• /
• v.27 no.2
• /
• pp.155-164
• /
• 2024

Studying the propagation characteristics of waves in circular plates has important engineering value. In this paper, graphene sheet reinforced foam (GPLRMF) circular plates are taken as the research object, and the propagation characteristics of shear and bending waves in the structure are analyzed. In the process of research, we assume that the material properties are closely related to temperature, and use the first-order shear deformation theory (FSDT) to establish the dynamic model of GPLRMF circular plates. Considering the simply supported boundary conditions, the relationship between phase velocity/group velocity and wave number was obtained through Laplace transform. Subsequently, the influence of material and geometric parameters on wave propagation characteristics was analyzed, and the results showed that the porosity coefficient and temperature had a significant impact on the characteristics of wave propagation in circular plates.