• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• 산업기술연구
• /
• 제26권A호
• /
• pp.75-80
• /
• 2006

A vibration monitoring is performed on a 1kW class stand alone wind turbine(W/T). When a W/T model is developed, general performance under various wind condition should be verified to introduce the product in the market. Especially, vibration characteristics within operating speed range are very important in the aspect of structural stability as well as generator's electrical efficiency. This paper examines the vibration performance of a home made 1kW W/T. Various data of the W/T model are acquired in real time using a remote vibration monitoring system installed in Daekwanryung test site. Vibration stability of the W/T structure is diagnosed based upon the data and the result is used to estimate the applicability of the W/T model.

• 한국분말재료학회지
• /
• 제27권4호
• /
• pp.293-299
• /
• 2020

W₂C is synthesized through a reaction-sintering process from an ultrafine-W and WC powder mixture using spark plasma sintering (SPS). The effect of various parameters, such as W:WC molar ratio, sintering temperature, and sintering time, on the synthesis behavior of W₂C is investigated through X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) analysis of the microstructure, and final sintered density. Further, the etching properties of a W₂C specimen are analyzed. A W₂C sintered specimen with a particle size of 2.0 ㎛ and a relative density over 98% could be obtained from a W-WC powder mixture with 55 mol%, after SPS at 1700℃ for 20 min under a pressure of 50 MPa. The sample etching rate is similar to that of SiC. Based on X-ray photoelectron spectroscopy (XPS) analysis, it is confirmed that fluorocarbon-based layers such as C-F and C-F2 with lower etch rates are also formed.

• 한국정보통신학회논문지
• /
• 제12권7호
• /
• pp.1301-1307
• /
• 2008

본 논문에서는 ARM 칩인 AT91SAM7S256, UHF RFID R/W 모듈인 WJ7090 및 무선 랜(IEEE 802.11.a/b)을 이용하여 UHF RFID R/W 전용 단말기를 개발하고 그 성능을 개선하였다. 또한 AT91SAM7S2S6에서 UHF R/W 모듈인 WJ7090으로 보내지는 송수신패킷을 개발하였다. 본 논문에서 개발한 무선랜(IEEE 802.11.a/b) 기반의 UHF RFID R/W 전용 단말기의 유용성을 평가하기 위해 성능 테스트를 실시하였다. 본 논문에서 개발한 UHF RFID R/W 전용 단말기는 RFID Tag값을 Tagging하고 그 값을 무선 랜(IEEE 802.11.a/b)을 통해서 서버로 전송하고, 그 결과를 단말기에 표시하였고, 성능실험을 통해 개발한 단말기의 우수성 및 송수신패킷에 대한 실험 결과를 나타내었다.

• 한국정보전자통신기술학회논문지
• /
• 제16권4호
• /
• pp.187-192
• /
• 2023

본 논문은 스퍼터링 장비를 이용하여 ITO 유리 기판에 CdTe 박막을 RF Power로 변화주면서 CdTe 박막을 증착하였다. 박막의 두께를 측정한 결과, 100W 일 때 1481Å, 150W는 2985Å, 200W는 4684Å로 측정되었다. 그리고 이동도는 100W일 때 8.43cm2/Vs, 150W는 7.91cm2/Vs, 200W는 6.57cm2/Vs로 측정되었다. 시편의 두께와 이동도는 반비례한 한다는 것을 알 수가 있었다. 투과율을 확인한 결과, 100W 일 때 905nm에서 투과율은 84%, 150W는 825nm에서 투과율이 71%, 200W는 874nm에서 77%로 측정되었다. 이것은 시편의 두께가 100W일 때 시편의 두께가 얇았으므로 투과율이 높게 측정되었다. 즉 투과율과 두께의 상관관계를 알 수가 있는 부분이다. RF Power를 변화주어 반치폭과 입자의 크기를 측정한 결과, 반치폭은 100W일 때 0.18, 150W는 0.19, 200W는 0.73으로 계산되었다. 입자의 크기는 100W에서는 8.47Å, 150W에서는 7.98Å, 200W일 때 가장 큰 8.7Å으로 형성된 것으로 확인되었다. 결론적으로 반치폭과 입자 크기는 반비례하는 것을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.975-983
• /
• 2022

A four-layered W/Cu functionally graded material (FGM) (W90% + Cu10%/W80% + Cu20%/W70% + Cu30%/W60% + Cu40%, wt.% fraction) and a four-layered diamond/W-Cu FGM (W90% + Cu10%/W80% + Cu20%/W70% + Cu30%/W55% + Cu40% + diamond5%, wt.% fraction) were fabricated by microwave sintering. The thermal conductivity and thermal shock resistance of diamond/W-Cu FGM and W-Cu FGM were investigated. The morphologies of the diamond particles and different FGMs were analyzed using AFM, SEM, EDS, and TEM. The results show that a 200 nm rough tungsten coating was formed on the surface of the diamond. The density of the tungsten-coated diamond/W-Cu FGM, obtained by microwave sintering at 1200 ℃ for 30 min, was 94.66%. The thermal conductivity of the fourlayered diamond/W-Cu FGM was 220 W·m^-1·K^-1, which is higher than that of the four-layered W/Cu FGM (209 W m^-1 K^-1). This indicates that adding an appropriate amount of tungsten-coated diamond to the high Cu layer W/Cu FGM improves the thermal conductivity of the composite. The diamond/W-Cu FGM sintered at 1200 ℃ for 10 min exhibited better thermal shock resistance than diamond/W-Cu FGM sintered at 1100 ℃ for 10 min.

• 천문학논총
• /
• 제30권2호
• /
• pp.125-127
• /
• 2015

We present preliminary results from OH ground state phase referenced observations carried out with the Multi Element Radio Linked Interferometer Network (MERLIN) and e-MERLIN towards the massive star forming region W49A. There are three active SFRs within this complex: W49 North (W49 N), W49 South (W49 S) and W49 South West (W49 SW). The first epoch of observations was obtained in 2005 with MERLIN while the second epoch was obtained in 2013 with the e-MERLIN upgraded system. In this paper, we present 1665 and 1720 MHz maser emission towards W49 S and W49 SW. Overall, both epochs show good agreement with the previous observations of Argon et al. (2000) carried out with the Very Large Array (VLA). The better sensitivity and wider velocity coverage of the MERLIN/e-MERLIN observations allowed us to discover a new 1720 MHz OH maser site in W49 S.

• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.533-539
• /
• 2023

본 연구는 강원도 강릉시에 위치한 A기관의 2020년부터 2021년 중심 데이터로 손상으로 입원한 환자를 손상외인코드를 통해 낙상환자를 분석하고자 하였다. 낙상환자의 손상외인코드인 W00부터 W19까지 20건의 코드를 분류한 후, 많이 발생한 W18, W01, W10, W13을 분석하였다. 손상외인코드 W18은 동일 면상에서의 기타 낙상으로 S72, Z47의 빈도수가 가장 많았으며, S72는 대퇴골의 골절, Z47은 정형외과적 추적치료이다. 손상외인코드 W01은 미끄러짐, 걸림 및 헛디딤에 의한 동일 면상에서의 낙상으로 W18과 같이 대퇴골의 골절인 S72와 정형외과적 추적치료 Z47이 많이 나타나는 것으로 판단하였다. W10은 계단에서의 낙상으로 뇌진탕, 경막외출혈 등이 있는 두개내손상 S06이 많이 나타났다. 마지막으로 W13은 빌딩 또는 구조물에서의 낙상으로 40대~70대에서 91%가 발생하여 중장년층이 많이 발생하는 것을 확인할 수 있었고, Z47은 정형외과적 추적치료가 가장 많았으며, S72는 대퇴골의 골절이 두 번째로 많은 것으로 나타났다. 이와 같이 낙상환자의 빈도수를 분석하여 낙상사고별 많이 발생하는 나이와 주진단코드를 분석하였다.

• 대한화장품학회지
• /
• 제41권4호
• /
• pp.303-313
• /
• 2015

센텔라 아시아티카 정량추출물(TECA)은 병풀에서 얻은 난용성 추출물로 상처치유 및 항주름 물질로 알려져 있다. 본 연구에서는 TECA를 함유한 water in oil in water ($W_1/O/W_2$) 에멀젼 제조에 필요한 최적의 실험 조건을 찾기 위해 연구를 진행하였다. TECA의 용해도는 UV 흡광도계를 이용하였으며, 디프로필렌글라이콜(40.0 g), 에탄올(20.0 g) 및 정제수(10.0 g)의 조성에서 2.55 g의 TECA가 용해되는 것을 확인하였다. 에멀젼($W_1/O$, $W_1/O/W_2$)의 안정도에 영향을 미치는 요인에 대하여 조사하였다. $W_1/O$ 에멀젼의 제조하기 위한 최적의 수상 조건은 디프로필렌글라이콜 : 에탄올 : 정제수 : TECA가 40.0 : 20.0 : 10.0 : 2.5%(w/w), 유상 조건은 스쿠알란 : 세틸피이지/피피지-10/1디메치콘 : 세테아릴알코올이 22.5 : 4.0 : 1.0%(w/w)임을 확인하였다. $W_1/O/W_2$ 멀티에멀젼을 제조하기 위한 최적의 조건은 정제수 : $W_1/O$ 에멀젼 : 폴리소르베이트 80 : 카보머 : 트리에탄올아민의 비율이 55.8 : 40.0 : 4.0 : 0.1 : 0.1% (w/w)임을 확인하였다.

• 말소리와 음성과학
• /
• 제2권3호
• /
• pp.65-73
• /
• 2010

No systematic study has examined the relationship between acoustic variability and /w/-deletion in Korean. Most previous studies on /w/-deletion have described /w/-variants in categorical terms, i.e., /w/-deletion or a full glide (Silva 1991; Kang 1997; Yun 2005). These studies are based either on impressionistic judgements without a systematic acoustic analysis or on an exclusive examination of internal acoustic variability of /w/ such as F2, without examining the availability of external acoustic cues such as voice onset time (VOT) of a consonant. However, given the important influence of the adjacent sounds for segmental realizations, it is necessary to examine possible acoustic variability in the differentiation of /w/-variants. The present study aims to address this issue by evaluating the acoustic properties of /CwV/, including VOT and formant transitions. In the analysis, 432 tokens in word-initial position (216 /CwV/ words and 216 /CV/ words) were examined. The results indicated that /w/ exhibits four different variants. Firstly, /w/ is realized as a full glide. Such a variant is characterized by a VOT difference and significant differences in F1 and F2 at voicing onset compared with /CwV/ and /CV/. Secondly, /w/ can be maintained but coarticulated with the following vowel. Such a variant is demonstrated by differences in VOT and F2. Thirdly, /w/ is categorically deleted, which is indicated by the absence of any differences in VOT, F1, and F2. Fourthly, /w/ overlaps a consonant. The F2 difference without VOT difference is manifested in the variant. In contrast to VOT, F1, and F2 differences, pitch plays little role in determining /w/-variants in Korean. These findings suggest that allophones can be produced along a gradient continuum of acoustic cues, exhibiting sounds intermediate between the full realization of a given category and its deletion. Furthermore, each variant can be cued by a set of internal and external acoustic cues.