• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.33-41
• /
• 2011

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.1
• /
• pp.22-32
• /
• 2003

Background : Sputum smears for acid-fast bacilli(AFB) examined microscopically is the most important diagnostic test for pulmonary tuberculosis. However, the AFB observed on the smear may represent either M. tuberculosis or nontuberculous mycobacteria (NTM). This study examined the recovery rate of NTM from the AFB smear-positive sputum specimens in a tertiary hospital in Korea. Materials and Methods : This study analyzed the results for the 1,889 AFB smear-positive and culture-positive sputum specimens collected from 844 patients from July, 1997 to December, 2001. Results : The 1,889 sputum specimens collected from 844 patients tested positive on both microscopy and culture during the 4.5 years. The NTM were recovered from 10.3% (195/1,889) of the smear-positive sputum specimens and 11.0% (93/844) of patients with smear-positive sputum. The NTM were isolated more than two times in 44.1% (41/93) of the patients from whom the NTM was recovered. Trends of the recovery rate of the NTM from the AFB smear-positive sputum specimens were increasing from 6.5%(17/262) in the latter half of 1997 to 17.8%(36/202) in the latter half of 2001 (p<0.001, test for trend). Conclusions : These results suggest that some patients with AFB smear-positive sputum have NTM pulmonary disease rather than pulmonary tuberculosis in Korea.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.88-94
• /
• 1977

A laboratory study was made of liming on the extractability of phosphate added to the uncultivated acid soils differing in clay content. The experiments were conducted with different rates of calcium carbonate and triple superphosphate at field capacity and 50% field capacity. The concentration of extractable phosphate was greatly reduced by simultaneous addition of calcium carbonate in the loam soil. When samples of the loam soil were preincubated for ranging from 0 to 50 days in the presence of calcium carbonate prior to phosphate application, the extractable phosphate concentration increased with preincubation time, and more phosphate was extracted from the soil maintained at 50% field capacity during the incubation. However, the extractable phosphate concentration in the sandyloam soil did not change with preincubation time and was not affected by moisture status. It may be concluded that the extractability of added phosphate was influenced by not only liming time but physical properties of soil.

• Korean Journal of Poultry Science
• /
• v.34 no.4
• /
• pp.259-269
• /
• 2007

This study was compared the effect of shelf-life and DHA accumulation in chicken meat from broilers fed experimental diets for two weeks($21{\sim}35$ days) of growers. Two hundred-ten male Ross broilers, 1 day of age, were randomly allocated to seven treatment groups. Experimental diets were assigned to each of the seven groups: control diet containing tallow, T1 with 1.00% fish oil, T2 with 2.00% fish oil, T3 with 2.00% fish oil, 200 ppm vitamin E and 200 ppm vitamin C, T4 with 2.00% fish oil and 200 ppm vitamin C, T5 with 2.00% fish oil and 200 ppm vitamin E, and T6 with 3.00% fish oil. The levels of DHA in chicken meat was the highest in T6, and T1 in breast muscle and thigh muscle with skin was higher than that of $T2{\sim}T5,\;T2{\sim}T5$ in raw chicken meat and wing with skin was about two-fold higher than that of T1. The contents of DHA in chicken meat according to storage days were significantly reduced to 42.30%, 49.38% and 48.51% in T1, T2 and T6, respectively, and this decrease was higher than that of T3, T4 and T5 (p<0.05). Particularly, the rate of reduction of DHA was the lowest in the T3 and T5, which were the lowest in TBARS(thiobarbituric acid reactive substances). TBARS increased in the order of T6, T2 and T1, but reduced in the order of T3, T5 and T4 according to storage days, and there was a significant difference among the treatment groups (p<0.05).

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.179-190
• /
• 2004

Precambrian metamorphic rocks of Yeongyang-Uljin area, which is located in the eastern part of Sobaegsan Massif, Korea, are composed of Pyeonghae, Giseong, Wonnam Formations and Hada leuco granite gneisses. These show a zonal distribution of WNW-ESE trend, and are intruded by Mesozoic igneous rocks and are unconformably overlain by Mesozoic sedimentary rocks. This study clarifies the deformation history of Precambrian metamorphic rocks after the formation of gneissosity or schistosity on the basis of the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structures of this area experienced at least four phases of deformation i.e. ductile shear deformation, one deformation before that, at least two deformations after that. (1) The first phase of deformation formed regional foliations and WNW-trending isoclinal folds with subhorizontal axes and steep axial planes dipping to the north. (2) The second phase of deformation occurred by dextral ductile shear deformation of top-to-the east movement, forming stretching lineations of E-W trend, S-C mylonitic structure foliations, and Z-shaped asymmetric folds. (3) The third phase deformation formed I-W trending open- or kink-type recumbent folds with subhorizontal axes and gently dipping axial planes. (4) The fourth phase deformation took place under compression of NNW-SSE direction, forming ENE-WSW trending symmetric open upright folds and asymmetric conjugate kink folds with subhorizontal axes, and conjugate faults thrusting to the both NNW and SSE with drag folds related to it. These four phases of deformation are closely connected with the orientation of regional foliation in the Yeongyang-Uljin area. 1st deformation produced regional foliation striking WNW and steeply dipping to the north, 2nd deformation locally change the strike of regional foliation into N-S direction, and 3rd and 4th deformations locally change dip-angle and dip-direction of regional foliation.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.616-621
• /
• 2013

Aconitum pesudo-laeve var erectum has been known to possess anti-inflammatory activity and modulate the intestinal immune system. In addition, it has traditionally been used for the treatment of water retention in the body. In this study, the anti-aging and anti-diabetes effects of water and ethanol extracts from Aconitum pesudo-laeve var. erectum were investigated. The activities of each extract were measured by antioxidant tests such as DPPH and ABTS radical scavenging activity, antioxidant protection factor (PF), TBARs content, and ${\alpha}$-amylase and ${\alpha}$-glucosidase inhibition activity assay. DPPH radical scavenging activity was found in over 50% of water and ethanol extracts at $100{\mu}g/ml$, $50{\mu}g/ml$, respectively. The ABTS radical scavenging activity of ethanol extract was $99.8{\pm}0.1$% at $1,000{\mu}g/ml$ in water, which was highest among the ethanol extract concentrations. PFs measured with ${\beta}$-carotene-linoleate model systems were in the order of ethanol (1.49 PF at $1,000{\mu}g/ml$) > ethanol (1.40 PF at $500{\mu}g/ml$) > water (1.33 PF at $1,000{\mu}g/ml$) > water (1.27 PF at $500{\mu}g/ml$). TBARs content in ethanol extracts ($1,000{\mu}g/ml$) was $0.16{\pm}0.03{\mu}M$, which was lower than that of water extracts and other ethanol extract concentrations. The extracts also showed over 90% of ${\alpha}$-amylase inhibition and over 60% of ${\alpha}$-glucosidase inhibition ratio in water ($1,000{\mu}g/ml$) and ethanol extracts (100~$1,000{\mu}g/ml$). These results suggest that Aconitum pesudo-laeve var. erectum extracts could be used as a cosmetic source and preventive agent for aging and diabetes.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.101-110
• /
• 2013

Due to the large specific surface area and great reactivity toward environmental contaminants, nanocrystalline mackinawite (FeS) has been widely applied for the remediation of contaminated groundwater and soil. Furthermore, nanocrystalline FeS is rather thermodynamically stable against anoxic corrosion, and its reactivity can be regenerated continuously by the activity of sulfate-reducing bacteria. However, nanocrystalline mackinawite is prone to either spread out along the groundwater flow or cause pore clogging in aquifers by particle aggregation. Accordingly, this mineral should be modified for the application of permeable reactive barriers (PRBs). In this study, coating methods were investigated by which mackinawite nanoparticles were deposited on the surface of alumina or activated alumina. The amount of FeS coating was found to significantly vary with pH, with the highest amount occurring at pH ~6.9 for both minerals. At this pH, the surfaces of mackinawite and alumina (or activated alumina) were oppositely charged, with the resultant electrostatic attraction making the coating highly effective. At this pH, the coating amounts by alumina and activated alumina were 0.038 and 0.114 $mmol{\cdot}FeS/g$, respectively. Under anoxic conditions, arsenite sorption experiments were conducted with uncoated alumina, uncoated activated alumina, and both minerals coated with FeS at the optimal pH for comparison of their reactivity. Uncoated activated alumina showed the higher arsenite removal compared to uncoated alumina. Notably, the arsenite sorption capacity of activated alumina was little changed by the coating with FeS. This might be attributed to the abundance of highly reactive hydroxyl functional groups (${\equiv}$AlOH) on the surface of activated alumina, making the arsenite sorption by the coated FeS unnoticeable. In contrast, the arsenite sorption capacity of alumina was found to increase substantially by the FeS coating. This was due to the consumption of the surface hydroxyl functional groups on the alumina surface and the subsequent occurrence of As(III) sorption by the coated FeS. Alumina, on the surface area basis, has about 8 times higher FeS coating amount and higher As(III) sorption capacity than silica. This study indicates that alumina is a better candidate than silica for the coating of nanocrystalline mackinawite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.35-41
• /
• 2003

The study was conducted to develope a rapid method for the detection of Yersinia enterocolitica in spring water and vegetables via multiplex polymerase chain reaction (PCR) technique using ail, yst, uirF and subgenus-specific Y16S primers. Specificity and sensitivity of multiplex PCR and application of best primers for the detection of Y. enterocolitica from spring water and vegetables were investigeted. Y. enterocolitica ATCC 27729 strains gave 356 bP and 200 bp (Y16S) and 134 bp (yst) bands. but Y. enterocolitica ATCC 9610 and ATCC 23715 strains gave 200 bp and 134 bp bands.In the meanwhile, non-pathogenic Yersinia species, such as Y. frederikseni, Y. inter-media, Y. kristenseni and Y. pseudotuberculosis gave only single 200 bp band, and other bacteria including Escherichia coli O157:H7 ATCC 25392, Shigella dysenteri. Staphylococcu aureus ATCC 25923 and Listeria mo-nocytogenes ATCC 19111 did not show any bands. Among primers, yst and Y16S primer showed the best sensitivity. Seven CFU/mL Y. enterocolitica cells could be detected with yst and Y16S primers and the sensitivity was significantly improved by the further 2nd PCR after 38 cycles of first PCR amplication. Spring water, cabbage and mushroom were inoculated with Y. enterocolitica to determine the sensitivity of multiplex-PCR for the rapid detection of Y. enterocolitica. Multiplex-PCR assay could detect 7 or 70 cells in spring water and vegetables using whole cell lysate with repeating PCR amplication.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.2
• /
• pp.209-214
• /
• 1984

To compare the keeping quality of freeze and spray dried red ginseng extract powders(RGEPs) and commercial dehydrated tea products, particle sizes and initial moisture contents of these products were measured, and the relationships between crude fat contents and moisture contents and/or densities were studied. Particle sires of RGEPs and commercial dehydrated tea products were below 100 mesh, and particle sizes of freeze dried products were higher than those of spray dried products. Initial moisture contents of freeze and spray dried RGEPz were 3.587 and 4.56f, and those of frecze and spray dried coffees were 2.17% and 3.52%, respectively. Crude fat contents of tang and ssanghwa tea were 4.12% and 0.62%, and densities of tang and ssanghwa tea were 0.89 g/ml and 0.59 g/ml, respectively. Absorption rates o( tang and ssanghwa tea were the lowest among these products, it was considered because of crude fat contents of tang and ssanghwa tea were higher than these of the other products, and densities of tang and ssanghwa tea were higher than these of the other products. Notwithstanding absorption rates of RGEPs were lower than those of coffees, to maintain lower keeping quality of RGEPs than that of coffees, it was considered that HGEPs are not only lower to coffees in crude fat contents but also in densities. A sinificant relationships were found between keeping Quality and crude fat content and/or density.