• 제목/요약/키워드: 97D50

검색결과 320건 처리시간 0.024초

고정밀 고전압 CCPS을 이용한 XFEL 200MW 펄스 모듈레이터 시험 (XFEL Pulse Modulator Test using High Precision High Voltage CCPS)

  • 박성수;김상희;권세진;이흥수;강흥식;김동수;신현석
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 전력전자학술대회 논문집
    • /
    • pp.97-99
    • /
    • 2014
  • 포항가속기 연구소에서 4세대 전자를 가속시키기 위하여 RF 공급원으로 사용하는 펄스 모듈레이터의 고전압 안정도는 50ppm 이하의 고전압이 요구된다. 200 MW 모듈레이터에 공급하기 위하여 개발된 고전압 CCPS사양은 50 kV, 120 kJ/sec, 2400mA, 20ppm이하이다. XFEL용 모듈레이터는 고정밀 고전압 CCPS를 적용하여 운전하였으며 모듈레이터 사양은 400kV, 500A, 8us, 60Hz, beam voltage stability 0.005(%)이다. 본 논문에서는 개발한 고정밀 고전압 CCPS를 사용하여 시험한 모듈레이터의 시험 결과에 대하여 발표하고자 한다.

  • PDF

3차원 공간정보를 이용한 해안 매립지역 침수예상도 제작 (Production of Flood Expectation Map in the Reclaimed Land Using 3-D Spatial Information)

  • 이재원
    • 대한공간정보학회지
    • /
    • 제15권4호
    • /
    • pp.97-102
    • /
    • 2007
  • 최근 들어 해일, 해수범람 등의 자연재해로 인하여 연안 해안에 대한 피해가 크게 늘어나고 있는 실정이다. 그 중에서도 해안 매립지역의 경우 자연재해에 취약한 지역이 많이 있으며, 대규모 재난이 일어날 가능성 또한 큰 지역이다. 따라서 본 논문에서는 해안 매립지역에 대한3차원 공간정보를 이용하여 침수 예상도를 제작하였다. 연구 대상지역으로는 대규모 해안 매립지역이 조성되어져 있는 부산시 강서구 명지지구 일대를 실험지역으로 지정하였으며, 조석자료와 현지 측량자료를 사용하여 해안 기준면 측정과 육상 높이 관측을 실시하였다. 그리고 GIS 프로그램을 이용하여 지형모델을 생성하였으며, 3D MAX 프로그램으로 건물에 대한 3차원 모델링을 제작하였다. 이를 최종 중첩하여3차원 입체지도를 제작하였으며, 제작된 지형도에 가상 침수위를 적용하여 침수면적을 계산해 본 결과 약 4.5m이상의 해일 발생시 실험지역의 50%이상이 침수될 가능성이 있음을 알 수 있었다.

  • PDF

Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

  • Jiang, Yuan-yuan;Sun, Lian;Wang, Hua;Zhao, Chun-yang;Zhang, Wei-Bing
    • 대한치과교정학회지
    • /
    • 제50권2호
    • /
    • pp.86-97
    • /
    • 2020
  • Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

알키메디안 스파이럴 슬롯을 이용한 소형화된 광대역 안테나 (Compact Broad-band Antenna Using Archimediean Spiral Slot)

  • 김준형;조태준;이홍민
    • 대한전자공학회논문지TC
    • /
    • 제47권3호
    • /
    • pp.50-56
    • /
    • 2010
  • 본 논문에서는 알키메디안 스파이럴 슬롯을 이용한 소형화된 광대역 안테나가 제안되었다. 제안된 안테나는 광대역 특성을 갖는 CPW 급전 구조, 스파이럴 구조와 슬롯 구조를 이용하여 소형화된 안테나의 크기와 매우 넓은 대역폭을 갖는다. 알키메디안 슬롯의 폭과 간격, CPW 급전 구조에서의 급전선로와 접지면 사이의 폭은 좋은 임피던스 정합의 특성과 넓은 대역폭을 갖도록 하기 위해 최적화 하였다. 제안된 안테나의 크기는 $8mm\;{\times}\;13mm$이며 FR-4 (비유전율 : 4.4, 기판두께 : 0.8mm) 기판 위에 설계되어졌다. 모의 실험한 결과 제안된 안테나의 임피던스 대역폭 (VSWR $\leq$ 2)은 5.98GHz (4.1GHz ~ 10.08 GHz)이고 1.57 dBi ~ 3.97 dBi의 균일한 이득을 갖으며 이득은 8.7 GHz에서 3.97 dBi를 갖는다. 측정 결과 제작된 안테나의 임피던스 대역폭 (VSWR $\leq$ 2)은 6.02GHz (4.48 GHz ~ 10.5 GHz)이고 최 대 이득은 9.4GHz에서 2.68 dBi틀 갖는다. 제안된 광대역 안테나는 넓은 주파수 범위에서 임피던스 정합과 방사패턴올 유지하는 특성을 나타내므로 넓은 대역이 요구되는 무선 통신 시스템에 응용될 수 있을 것으로 사료된다.

Effects of [D-$Pen^2$, D-$Pen^5$]-enkephalin on the Neuronal Activity of Medial Vestibular Nuclear Neurons

  • Jang, Su-Jeong;Jeong, Han-Seong;Park, Jong-Seong
    • 대한의생명과학회지
    • /
    • 제15권3호
    • /
    • pp.199-205
    • /
    • 2009
  • This study was designed to investigate direct effects of [D-$Pen^2$, D-$Pen^5$]-enkephalin, a $\delta$-opioid receptor agonist on the neuronal activity of medial vestibular nuclear (MVN) neurons by whole-cell configuration patch clamp experiments. The spike frequency of MVN neuron was increased to $9.50{\pm}0.55$ (P<0.05) and $10.56{\pm}0.66$ (P<0.05) by 5 and $10{\mu}M$ [D-$Pen^2$, D-$Pen^5$]-enkephalin from the control level of $8.05{\pm}0.55$ spikes/sec, respectively (n=18). The resting membrane potential of the neurons was increased to $-37.86{\pm}0.92$ and $-36.97{\pm}0.97$ (P<0.05) from $-38.74{\pm}1.13\;mV$ by 5 and $10{\mu}M$ [D-$Pen^2$, D-$Pen^5$]-enkephalin, respectively. The amplitude of afterhyperpolarization was decreased to $23.78{\pm}0.65$ and $21.67{\pm}0.89$ (P<0.05) from $23.73{\pm}0.53\;mV$ by 5 and $10{\mu}M$ [D-$Pen^2$, D-$Pen^5$]-enkephalin, respectively. The spike width was changed to $2.22{\pm}0.08$ and $2.24{\pm}0.07$ from $2.20{\pm}0.08\;mV$ by 5 and $10{\mu}M$ [D-$Pen^2$, D-$Pen^5$]-enkephalin, respectively. After pretreatment of naltrindole, a highly selective 8-opioid receptor antagonist, [D-$Pen^2$, D-$Pen^5$]-enkephalin did not change firing rate, resting membrane potential, afterhyperpolarization amplitude, and spike width of MVN neurons. The above experimental results suggest that [D-$Pen^2$, D-$Pen^5$]-enkephalin increases the neuronal activity of MVN neurons via inhibition of calcium-dependent potassium currents underlying the afterhyperpolarization.

  • PDF

이식형 심장 박동 조절 장치용 저 전력 4차 대역통과 Gm-C 필터 (Low-Power 4th-Order Band-Pass Gm-C Filter for Implantable Cardiac Pacemaker)

  • 임승현;한건희
    • 대한전자공학회논문지SD
    • /
    • 제46권1호
    • /
    • pp.92-97
    • /
    • 2009
  • 저 전력 소모는 의료용 이식 장치에서 매우 중요한 요소가 된다. 본 논문에 제안된 이식형 심장 박동 조절기의 감지 단에 필요한 저 전력 4차 Gm-C 필터는 다단 증폭 단으로 구현 되었다. 매우 큰 시상수를 구현하기 위해서 전류 분할 및 플로팅-게이트 기법이 적용된 OTA가 사용되었다. 측정 결과, 필터는 50 dB의 SFDR을 가지며, $1.8{\mu}$, W의 전력이 소모되었다. 전원 전압은 1.5 V가 공급되었고, 코어는 $2.4\;mm{\times}1.3\;mm$의 실리콘 면적을 차지한다. 제안된 필터는 1-poly 4-metal $0.35-{\mu}m$ CMOS 공정에서 제작되었다.

10 Gbps용 MQW 광변조기의 변조 성능 극대화를 위한 최적 패키지에 관한 연구 (Package Optimization for Maximizing the Modulation Performance of 10 Gbps MQW Modulator)

  • 김병남;이해영
    • 전자공학회논문지D
    • /
    • 제35D권10호
    • /
    • pp.91-97
    • /
    • 1998
  • 10 Gbps용 전계 흡수형 InGaAsP/InGaAsP 응력 완화 MQW (Multiple Quantum Well) 광변조기의 변조 성능은 패키징후 발생되는 기생 특성에 의해서 큰 영향을 받음을 확인하였다. 이 초고주파 기생 특성은 변조기의 변조 대역폭을 제한하고 처핑 변수를 증가시키는 요인이 된다. 따라서, 이러한 기생 성분중 고속·광대역 변조시 변조 성능을 크게 저하시키는 본딩와이어에 의한 유도성 기생성분을 최소화시키기 위해 유전체 몰딩된 이중 본딩와이어 구조를 제안하였다. 50 Ω 저항으로 병렬 종단된 MQW 광변조기에 제안된 본 구조를 이용할 경우, 패키징전에 비하여 변조 대역폭이 약 125 %가 확대됨을 확인하였다. 또한 이 구조를 이용할 경우 기존에 무시되었던 패키징 기생 특성에 의한 처핑 변수의 영향을 최소화시킬 수 있는 효과적인 방법이 됨을 확인하였다. 본 연구 결과는 10 Gbps 대역 이상의 초고속 외부 광변조기의 변조 성능 극대화를 위한 최적 패키지 구현 자료로서 유용하게 사용될 수 있다.

  • PDF

수학 문제 해결의 역사와 모델링 관점 (The History of Mathematical Problem Solving and the Modeling Perspective)

  • 이대현;서관석
    • 한국수학사학회지
    • /
    • 제17권4호
    • /
    • pp.123-132
    • /
    • 2004
  • 이 글에서는 20세기의 문제 해결의 역사에 대하여 개관하고, 21세기에 새로운 경향으로 주목받고 있는 모델링 관점에서의 수학 문제 해결에 대하여 알아보았다. 전통적인 문제 해결에서는 상황과 분리되어 있는 문제의 조건을 수학적 표현으로 바꾸는 번안 기술의 습득을 주요 관심사로 다루었다. 반면에, 모델링 관점에서 문제 해결은 해결할 필요가 있는 현실적인 문제 상황에서 출발하여 수학적인 정리 수단으로 재조직하고, 수학적 상황에서 문제를 해결하여 다시 실제 현상에 적용하는 과정을 따른다. 따라서, 학생들은 문제를 해결해 가는 과정에서 수학화를 경험하게 되고, 수학을 배우게 되는 이점이 있다.

  • PDF

VCO의 MSL길이가 발진특성에 미치는 영향 (Effects of the length the MSL on the oscillation characteristic of the VCO)

  • 이동희;정진휘
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.721-724
    • /
    • 2001
  • In this paper, we present the effect the length the MSL(Microstrip Line) on the oscillation characteristic of the fabricated VCOs(Voltage Controlled Oscillator) designed and analyzed by RF circuit simulator Serenade(ANSOFT Co.) and fabricated by screen printing method on the alumina substrate. We have fabricated VCOs with 3 different MSL length and each MSL length of the VCO is 140mi1, 280mil and 560mi1. The oscillation frequency of each sample(VCO) was tuned to UHF band(750MHz∼900MHz) varying the capacitance. The experimental result shows the phase noise -82∼-97[dBc/Hz] at a 50 [kHz] offset frequency, the pushing figure 94∼318[kHz] at 3${\pm}$0.15[V] and the harmonics 13∼21 [dBc] between MSL length 140mi1s and 560mi1. The frequency and output variation width are 779∼898[MHz], -36∼-33[dBm] at MSL length 140mi1; 818∼836[MHz], -27.19∼-27.06[dBm] at 280mi1;751.54∼751.198[MHz],-33.44∼ -33.31[dBm] at 560mi1. we examined 3 VCOs oscillation characteristic difference through comparison with phase noise, oscillation power and frequency by control voltage change, harmonics and pushing figure for each sample.

  • PDF

LC공진기의 MSL길이에 따른 VCO 발진 특성 (VCO Oscillation Characteristics by Varying the Length of the MSL of LC Resonator)

  • 이동희;정진휘
    • 한국전기전자재료학회논문지
    • /
    • 제15권5호
    • /
    • pp.412-418
    • /
    • 2002
  • In this paper, the authors present the simulation results and the experimental considerations on the effects of the effects of the VCO oscillation characteristics caused by varying the length of the MSL and the composition capacitance of LC resonation circuity. Simulation was accomplished by nonlinear RF circuit simulator for designing and analyzing the RF characteristis of VCO. The samples with 3 different MSL lengths of which the length is 140mil, 280mil and 560mil respectively were fabricated by screen printing process. The oscillation frequency of each sample(VCO) was tuned to UHF band (750MHz~900MHz) by varying the capacitance of LC resonator circuit. The experimental results showed that the values of phase noise were -82, -93, -97[dBc/Hz] at 50[kHz] offset frequency, the pushing figures were 114, 94, 318[kHz] at applied voltage of $3\pm0.15$[V] and the harmonics were -21, -16, -13[dBc] for MSL lengths of 140mil 280mil, 560mil respectively. The frequency and output variation width were 779~898[MHz], -36~-33[dBm] for MSL with 140mil length; 818~836[MHz], -27.19~27.06[dBm] for 280mil; 751.54~751.198[MHz], -33.44~-33.31[dBm] for 560mil.