• Journal of the Korean Ceramic Society
• /
• v.29 no.3
• /
• pp.223-231
• /
• 1992

CaO and ZnO were added to Al2O3-SiO2 binary system respectively as flux, then ZrO2 and TiO2 were applied as nucleating agent to these CaO-Al2O3-SiO2 and ZnO-Al2O3-SiO2 ternary system glass. The transparency could not be kept in CaO-Al2O3-SiO2 system glass, whereas the transparent glass-ceramics were prepared in ZnO-Al2O3-SiO2 system glass containing ZrO2 as the nucleating agent. At this time the optimum heating temperatures for the nucleation and the crystal growth were 78$0^{\circ}C$ and 97$0^{\circ}C$. The sizes of the precipitated crystals in the transparent glass-ceramics were below 0.1 ${\mu}{\textrm}{m}$, and their light transmissibilities were more than 80%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.69-80
• /
• 2019

This paper proposes a multimodal sensor platform which supports plug and play (PnP) technology. PnP technology automatically recognizes a connected sensor module and an application program easily controls a sensor. To verify a multimodal platform for PnP technology, we build up a firmware and have the experiment on a sensor system. When a sensor module is connected to the platform, a firmware recognizes the sensor module and reads sensor data. As a result, it provides PnP technology to simply plug sensors without any software configuration. Measured sensor raw data suffer from various distortions such as gain, offset, and non-linearity errors. Therefore, we introduce a polynomial calculation to compensate for sensor distortions. To find the optimal coefficients for sensor calibration, we apply a genetic algorithm which reduces the calibration time. It achieves reasonable performance using only a few data points with reducing 97% error in the worst case. The platform supports various protocols for multimodal sensors, i.e., UART, I2C, I2S, SPI, and GPIO.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.60-66
• /
• 2015

This study was conducted to determine the effects of seed storage method ($-20^{\circ}C$, $2^{\circ}C$ dry, $2^{\circ}C$ wet 30 days, $2^{\circ}C$ wet 60 days, stratification and room temperature) and shading treatment(control, 50%, 80%) on seed germination, seedling growth of endangered species, Iris dichotoma and Iris setosa. As a result, seed germination rate of I. dichotoma was the highest at 75% when seed were stored at $2^{\circ}C$ wet 60 days and then sown under non-shading condition. The seed of I. dichotoma belong to intermediate seed. Seed germination rate of I. setosa was the highest at 95% when seed were stored at $2^{\circ}C$ wet 60 days and then sown under 80% shading condition. The seed of I. setosa belong to recalcitrant seed. Seedlings of I. dichotoma and I. setosa showed not only the best seedling quality but also seedling vigor index in seed stored at $2^{\circ}C$ wet 60 days under non-shading condition, with the growth characteristics of plant height (6.4, 7.2 cm), number of leaves (3, 4), leaf width (4.6, 3.2 mm), leaf length (5.7, 6.8 cm), fresh weight (aerial/root part; 144/260, 97/153 mg), dry weight (aerial/root; 31/20, 17/17 mg) and seedling vigor index and modified seedling vigor index (13,895/9,479, 13,256/8,668). In this research, I. dichotoma and I. setosa seed were stored at $2^{\circ}C$ wet 60 days, and then sown in non-shading condition, seed germination rate was more than 75%, 90%, respectively, and production of superior quality seedlings.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1074-1079
• /
• 1996

Physicochemical characteristics of pigment separated from cockle shell were studied. Pigment on the cockle shell was peeled with distilled water, and soaked in 4% TCA solution for 30 minutes and filtered. Filtrate was washed 3 times with distilled water and Iyophilized. Dried pigment was dissolved with 2N NaOH solution and preparative TLC with 2N NaOH : acetone(1 : 1). UV/vis spectrum of pigment separated from cockle shell and melanin as standard was same one peak at UV area and λ$_{max}$was 226nm. Dissolved property of pigment was same as that of melanin. Pigment was not ommochrome but like melanin, because it was insoluble in formic acid, whitening in $H_2O_2, $ and pattern of UV-spectrum was same as melanin. Pigment separated from cockle shell was stable at high temperatures. In thermal treatment at $70^{\circ}C, $ $80^{\circ}C, $ $90^{\circ}C$ and $100^{\circ}C$ for 8 hours, retention ratio of pigment separated from cockle shell were 95.0%, 93.3%, 90.8% and 87.6%, respectively.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.235-248
• /
• 2017

This study was initiated to investigate seed germinating vigor, germination speed, and establishment characteristics of Festuca species under natural conditions ($5-25^{\circ}C$). Germination rate was 62.0% in CRF 'Audubon' to 97.0% in TF 'Olympic Gold'. It was greater with TF over fine-type fescues, being TF>SF>CF, HF>CRF. The germination speed, measured as days to seed germination of 50% through 80%, was fastest with TF, medium to high with CF, medium with HF and SF, and slowest with CRF. However, it was approximately 4 days slower under natural conditions, as compared with that under alternative conditions ($15-25^{\circ}C$). Germination peak time was much faster with TF. It ranged from 0.73 to 1.84 days with TF, being 1.45 days in average. But it varied with 2.16 to 11.75 days among fine-type species. The peak time was longer in order of SFCF>SF>HF>CRF.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.2
• /
• pp.270-277
• /
• 2015

This study was performed to investigate the antidiabetic and antioxidant activities of Crataegus pinnatifida which was extracted with water and different concentrations of EtOH (0~100%). The extraction yield of 70% EtOH (33.16%) was higher than that of 50% EtOH (27.79%), water (21.71%), 30% EtOH (21.88%) and 100% EtOH (19.03%). Total polyphenol contents of 50% EtOH extract from C. pinnatifida were the highest. DPPH and ABTS radical scavenging activities were $80.79{\pm}0.83%$ and $34.92{\pm}0.97%$ in 50% EtOH extract, respectively, which were higher than those of other extracts. The inhibitory activities of 50% ethanol extract from C. pinnatifida against advanced glycation end products (AGEs) formation and ${\alpha}$-glucosidase were determined to be $27.09{\pm}2.27%$ and $58.87{\pm}0.70%$, respectively. The inhibitory activity of water extract from C. pinnatifida against aldose reductase was higher ($30.68{\pm}1.41%$) than those of other extracts. Overall, 50% EtOH extract from C. pinnatifida showed the highest antidiabetic and antioxidant effects. These results suggest that 50% ethanol extracts from C. pinnatifida have potential as a useful ingredient with antidiabetic and antioxidant effects.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.384-389
• /
• 2018

Nanoparticles of PbTe are prepared via chemical reaction of the equimolar aqueous solutions of $Pb(CH_3COO)_2$ and Te at $120^{\circ}C$. The size of the obtained particles is 100 nm after calcination in a hydrogen atmosphere. Dense specimens for the thermoelectric characterization are produced by spark plasma sintering of prepared powders at $400^{\circ}C$ to $500^{\circ}C$ under 80 MPa for 5 min. The relative densities of the prepared specimens reach approximately 97% and are identified as cubic based on X-ray diffraction analyses. The thermoelectric properties are evaluated between $100^{\circ}C$ and $300^{\circ}C$ via electrical conductivity, Seebeck coefficient, and thermal conductivity. Compared with PbTe ingot, the reduction of the thermal conductivities by more than 30% is verified via phonon scattering at the grain boundaries, which thus contributes to the increase in the figure of merit.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.183-188
• /
• 2010

$Ce_{0.8}Gd_{0.2}O_{1.9}$(GDC20) powder was synthesized by milling of $CeO_2$ slurry and Gd oxalate precipitation. The mixture of $CeO_2$ powder and Gd precipitates calcined at $600^{\circ}C$ for 2 h showed the particle size distribution similar to that of $CeO_2$ powder, which had been milled during the synthesis process. Attrition milling of the calcined powder with an average particle size of $0.36\;{\mu}m$ for 2 h resulted in a decrease in the particle size to $0.24\;{\mu}m$. Although the milled powder consisted of small particles(<$1\;{\mu}m$), a small amount of fine platy $Gd_2O_3$ particles, which had been survived in the milling process, was observed. Sintering of the powder compacts for 4 h showed relative densities of 80.7% at $1300^{\circ}C$ and 97% at $1400^{\circ}C$, respectively. Densification was found to almost complete at $1500^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.278-283
• /
• 2013

A gram-positive, rod-shaped, spore-forming, motile thermophilic bacterium was isolated from a sterilization oven. The microorganism GWE1, formally named Geobacillus wiegelii identified as a member of the genus Geobacillus. GWE1 grew under aerobic conditions of between $60-80^{\circ}C$ (optimum $670^{\circ}C$), in a pH range of 3.0-8.0 (optimum $pH^{70^{\circ}C}$ 5.8), and between 0 and 2 M NaCl (optimum 0.3 M). The membrane polar lipids were dominated by branched saturated fatty acids, which included as the major constituents; iso-15:0 (13.3%), 16:1(${\omega}7$) (12.8%), 16:0 (28.5%), iso-17:0 (13.5%) and anteiso-17:0 (12.3%). The DNA G+C content was 47.2 mol% (determined by HPLC). The 16S rRNA gene sequence of GWE1 showed a high similarity with Geobacillus caldoxylosilyticus (97%). However, the level of DNA-DNA relatedness was only 58%. These data suggest that GWE1 is probably a novel specie of the genus Geobacillus.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.352-357
• /
• 2018

Celecoxib (4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl]benzenesulfonamide) is a cyclooxygenase-2 inhibitor used in the treatment of arthritis, acute pain, and dysmenorrhoea. Celecoxib is a Biopharmaceutics Classification System (BCS) class II compound whose oral bioavailability is highly limited owing to its poor aqueous solubility. Several polymorphs of celecoxib have been identified as Form I, Form II, and Form III with melting points of about $162.8^{\circ}C$, $161.5^{\circ}C$, and $160.8^{\circ}C$, respectively. Form IV was generated from the precipitated suspension in the presence of HPMC (Hydroxypropyl methylcellulose) and Polysorbate 80. A rapid rate of dissolution is useful because the rate of dissolution of a drug typically increases its bioavailability. The aim of this study was to investigate the possibility of production of new crystal form of celecoxib that has higher solubility than Form III. New crystal form of celecoxib (Form A) has been isolated by recrystallization and characterized by differential scanning calorimetry (DSC), thermogravimetric (TG) analysis and powder X-ray diffractometry (PXRD). Form A was dissolved faster than Form III. At 30 minutes, the dissolution of Form A was 97.3%, whereas the dissolution of Form III was 82.2% (p < 0.1). After storage of three months at $20^{\circ}C$, in 24% RH (Relative Humidity), the crystal form was not transformed.