• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1943-1949
• /
• 2010

In this paper, we developed a RFID tag antenna using one-sheet inlay pattern which consist of two different frequencies in one layer. The antenna in one-sheet inlay RFID tag does not use different kind RFID antennas in a card but implement 13.56MHz and 900MHz RFID tag antennas in one sheet. In order to evaluate the usability of proposed method, we configured test equipments and designed 6 different patterns and test the recognition distance of each pattern. Among the one-sheet inlay RFID tag antenna designs, the pattern no.5 has good performance with recognition distance of 5.34m at 900MHz and 3.5m at 13.56MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2010

In this paper, a design for the 900MHz bandwidth RFID reader antenna with circular polarization is proposed and experimentally investigated. The 900MHz bandwidth RFID reader antenna is proposed as a simple radiator with loading capacitor to generate LHCP(Left Hand Circular Polarization). Also, the design and fabrication of antenna has the returnloss of -32.28dB at the center frequency of 1010MHz and Bandwidth of 12.5% at 905Hz~1030MHz. Proposed LHCP antenna of maximum gain is 6dBi and satisfy axial ratio based on 2. From the measured result, axial ratios based on 2 are observed at the operating frequencies. The proposed antenna is suitable for RFID applications in wireless communications.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.55
• /
• pp.3-15
• /
• 2005

본 고에서는 최근 많은 관심을 갖고 있는 900 MHz UHF 대역을 사용하는 RFID시스템의 무선 인터페이스 표준에 대해 살펴본다 900 MHz UHF 대역의 RFID시스템은 유통,물류에 사용될 것으로 기대되기 때문에 국제표준화기구인 ISO와 국제 민간표준화 기구인 EPCglobal에서 무선 인터페이스 표준을 세우고 있다. 특히 2004년부터 이뤄진 EPCglobal의 EPC Class 1 Generation 2표준은 향후 ISO의 900 MHz 대역 RFID 시스템의 새로운 무선 인터페이스 표준으로 정해질 것으로 기대되고 있어 더욱 관심을 모으고 있다. 이에 본 고에서는 900 MHz대역 RFID 무선 인터페이스 표준인 ISO/IEC의 ISO 18000-6과 EPCglobal의 EPC Class 1 Generation 1, Generation 2 를 중심으로 900 MHz대역 RFID 시스템의 무선 인터페이스 표준화 동향을 살펴보았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.290-293
• /
• 2007

RFID 시스템은 주파수마다 다른 인식 거리를 가지며, 장거리 시스템의 900MHz의 경우 1m에서 최대 10m까지 인식 범위를 가진다. 주파수는 거리에 의하여 해당 파장이 감쇠하는 현상이 생하며, PSK 질문기에서 발생하는 전파는 1/4파장 변화에 의하여 출력 신호 극성이 반전되며 허용 인식범위 내 응답기에서도 적합한 통신이 안되는 영역이 발생하였다. 본 연구에서는 900MHz RFID 장비를 기본으로 안테나와 태그의 위치를 변경하여 테스트를 진행하여 어떤 지정에서 음영구역이 발생하는지 테스트를 진행하고, 문제점이 발생하는 원인에 대하여 논하며 이런 문제점을 해결하기 위하여 일본에서 2.4GHz RFID 응답기에서 사용하는 베이스 밴드 FSK 변조회로를 기반한 900MHz RFID 응답기 설계방안을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.125-128
• /
• 2008

In this paper, a stand-type planar antenna of 900MHz RFID band is designed and fabricated. As the proposed antenna is stand-type use of air permittivity, Bandwidth used ground height at rectangle patch structure and coaxial feed line is widen. Also wideband width can solve problem that RFID tag attached to things happens frequency shift keying phenomenon by liquid, special metal, temperature, humidity etc. Bandwidth of fabricated antenna to VSWR less than 2 is satisfied 11.9% at $890MHz{\sim}1000MHz$. And proposed antenna is circular polarization antenna of operating characteristics that axial ratio is less than 2 and gain is 6dBi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1141-1146
• /
• 2011

In this paper, an adaptive RFID tag antenna in 900MHz for using in inadequate electromagnetic environment is designed and implemented. The dimension of the proposed passive tag is $102mm{\times}102mm{\times}9mm$, the operating frequency band is 908~914MHz and the detection range is 5.1m. This paper describes the development of the thermal, water and impact resisting tag. The implemented tag can be used for the inadequate environment such as in-built tag on the ground for the car management service.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.102-110
• /
• 2007

In this paper, a portable RFID reader which operated in 900MHz UHF band is designed and fabricated and the characteristics of the manufactured portable RFID reader is analyzed through measurement. Analysis of measurements results is achieved based on EPC Class 0 standards that proposed by EPC Global. The proposed RFID reader communicate with tags about 11kbps speed, and have 20 dBm for its maximum RF output power. The proposed portable RFID reader can recognize maximum 68 tags per second, and when reader's output power is 20 dBms, maximum recognition distance is 30cm. And the total size of implemented RFID reader is $71mm{\times}55mm$, that is the maximum 90%, minimum 14% reduced size compared with marketed product.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.515-520
• /
• 2009

This paper presents the software design of RFID Educational system based on using 900MHz air interface between the reader and the tag. Software of the reader and active tag is developed on embedded environment and the software of PC controlling the reader is on window OS. ATmega128 processor is used for H/W of the reader and active tag, and C language is used for their developing. Programming on window OS used MFC. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Software design of 900MHz RFID educational system is done on the basis of these functions.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.570-574
• /
• 2008

The 'gate non-stop system utilizing RFID (900MHz)', which is the core of this research, is the system which connects RFID to recognize the vehicle information without stopping when a vehicle (trailer) passes a gate to carry in or out containers in a terminal and automatically provides the container information provided by the terminal for the RFLDU device installed in the vehicle.In order to design and implement this, the RFID technical section uses a UHF band (900MHz) RFID tag and a reader and implements a RFID middleware and an application program for smooth data collection and execution (operation). In addition, the system stability was verified through experiments and operations of the system implemented in this research at real harbors/quays, and based on the verified result, the maximization of vehicle (trailer) and terminal productivity and the reduction of distribution cost are expected.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.9-17
• /
• 2011

In this paper, a bike management system using 900 MHz RFID technology has been developed. There are limits to the 13.56 MHz spectrum of existing management systems, which are single tag identification and the short possible identifying distance of the technology. In this paper, we use 900 MHz instead of 13.56 MHz in order to make wide recognition and multi-tag identification possible. Granted, there are also many benefits to using 13.56 MHz RFID tags, which include compatibility with existing bike management systems. This system was developed on the 900 MHz band using RFID similarly to existing 13.56 MHz systems in order to be able to manage multiple bikes at the same time.