• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1032-1038
• /
• 2021

Rate of penetration(ROP) is one of the important variables for maximizing the drilling performance. In order to maximize drilling efficiency, it is necessary to increase the drilling speed, and real-time ROP prediction is important so that the driller can identify problems during drilling. The ROP has a high correlation with the drillstring rotational speed, weight on bit, and flow rate. In this paper, the ROP was predicted using a data-driven supervised learning model trained from the drilling efficiency parameters. As a result of comparison through the performance evaluation metrics of the regression model, the root mean square error(RMSE) of the RF model was 4.20 and the mean absolute percentage error(MAPE) was 9.08%, confirming the best predictive performance. The proposed method can be used as a base model for ROP prediction when constructing a real-time drilling operation guide system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.335-342
• /
• 2022

In this paper, a single-bit 3rd-order feedforward delta sigma modulator is proposed for audio applications. The proposed modulator is based on a class-C inverter for low voltage and power applications. For the high-precision requirement, the class-C inverter with regulated cascode structure increases its DC gain and acts as a low-voltage subthreshold amplifier. The proposed Class-C inverter-based modulator is designed and simulated in 180-nm CMOS process. With no performance loss and a low supply voltage compatibility, the proposed class-C inverter-based switched-capacitor modulator achieves high power efficiency. This design achieves an signal-to-noise-and-distortion ratio (SNDR) of 93.9 dB, an signal-to-noise ratio (SNR) of 108 dB, an spurious-free dynamic range (SFDR) of 102 dB, and a dynamic range (DR) of 102 dB at a signal bandwidth of 20 kHz and a sampling frequency of 4 MHz, while only using 280 μW of power consumption from a 0.8-V power supply.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.65-71
• /
• 2009

In this paper a new space-time diversity relaying strategy using cooperative communication technique is proposed. More than one relaying terminals are included in one cooperative group to share their state information, such as frame error rate and channel state information. The best terminals are selected to send bit information using space-time diversity relay system. An implementation for the proposed scheme is also presented using the TDMA cooperative protocol. The resulting receive signal to transmit signal ratio and computer simulation demonstrate that the proposed strategy outperforms the conventional cooperative system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1222-1228
• /
• 2006

In this paper, I propose a video watermaking method using adaptive threshold value and half-cell motion vector. Conventional method cause a lot of change of motion vectors and bring about a falling-off in invisibility, because it search embedding condition about whole macroblocks and watermarks are embedded in arbitrary motion vectors. Proposed method improve invisibility and decrease in number of change of motion vectors, because it create threshold value by using power of motion vector(PMV), and watermarks are embedded in motion vectors which greater than threshold value. Consequently, proposed method improve invisibility with on an average 5.4 dB ~9.3dB according to video bit-stream.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2011

In this paper, a new method for effective video coding is studied. Picture set filter is proposed for preserving compression ratio and video quality. This filter controls the compression ratio of each frame depending on the correlation to the reference frame by selectively eliminating less important high-resolution areas. Consequently, video quality can be preserved and bit rate can be controlled adaptively. In the simulation, to test the performance of the proposed coding method, comparisons with the full search block matching algorithm and the differential image coding algorithm are made. In the former case, video quality, compression ratio and encoding time is improved. In the latter case, video quality is degraded, but compression ratio and encoding time is improved. Consequently, the proposed method shows a reasonably good performance over existing ones.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.39-44
• /
• 2002

In this paper, in order to improve the performance of TCP short traffic application services in wireless Internet environments, the Split-ACKs (SPACK) scheme is proposed. In wireless networks, unlike wired networks, packet losses will occur more often due to high bit error rates. Therefore, each packet loss over wireless lints results in congestion control procedure of TCP being invoked at the source. This causes severe end-to-end Performance degradation of TCP. In this paper, to alleviate the TCP Performance, the SPACK method, split acknowledgement Packets in the base station, is proposed. Using computer simulation, the performance of TCP using SPACK is analysed and shows better performance than traditional TCP Protocol.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.11-20
• /
• 1998

High-speed complex-number arithmetic units are essential to baseband signal processing of modern digital communication systems such as channel equalization, timing recovery, modulation and demodulation. In this paper, a new complex-number multiplication algorithm is proposed, which is based on redundant binary (RB) arithmetic combined with radix-4 Booth recoding scheme. The proposed algorithm reduces the number of partial product by one-half as compared with the conventional direct method using real-number multipliers and adders. It also leads to a highly parallel architecture and simplified circuit, resulting in high-speed operation and low power dissipation. To demonstrate the proposed algorithm, a prototype complex-number multiplier-accumulator (CMAC) core with 10-bit operands has been designed using 0.8-$\mu\textrm{m}$ N-Well CMOS technology. The designed CMAC core contains about 18,000 transistors on the area of about 1.60 ${\times}$ 1.93 $\textrm{mm}^2$. The functional and speed test results show that it can operate with 120-MHz clock at V$\sub$DD/=3.3-V, and its power consumption is given to about 63-mW.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.9-17
• /
• 2000

In this paper we implement computer simulation system of 4FSK signal MODEM using Quadrature detector and analyze overall tranceiver system. We follow the FLEX wireless paging system standards and construct premodulation filter and data frame. We propose an efficient open loop symbol timing recovery algorithm which takes advantage of 128 bit length preamble pattern and also propose a 32 bit UW pattern which Is based on the optimal UW detection method, and excellent aperiodic autocorrelation characteristic. The BER simulation in the fading channel as well as AWGN is performed with BCH coding and Interleaving to the Quadrature detector system and it is shown that a high coding fain occurs in the fading channel rather than AWGN channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.849-860
• /
• 2007

Because the H.264/AVC standard adopts the variable length coding algorithm, the rate of encoded video bitstream fluctuates a lot as time flows, though its compression efficiency is superior to that of existing standards. When a video is transmitted in real-time over networks with fixed low-bandwidth, it is necessary to control the bit rate which is generated from encoder. Many existing rate control algorithms have been adopting the quadratic rate-distortion model which determines the target bits for each frame. We propose a new rate control algorithm for H.264/AVC video transmission over networks with fixed bandwidth. The proposed algorithm predicts quantization parameter adaptively to reduce video distortion using the quadratic rate-distortion model, which uses the target bit rate and the mean absolute difference for current frame considering pixel difference between macroblocks in the previous and the current frame. On video samples with high motion and scene change cases, experimental results show that (1) the proposed algorithm adapts the encoded bitstream to limited channel capacity, while existing algorithms abruptly excess the limit bit rate; (2) the proposed algorithm improves picture quality with $0.4{\sim}0.9dB$ in average.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.811-816
• /
• 2011

In this paper, we analysis to consider the performance of PSPM (Phase Shift Pulse-position Modulation), the one of the low power communication technique, in near-field underwater sound channel by sea trial. PSPM is a QPSK(Quadrature Phase Shift Keying) modulation combined with PPM(Pulse Position Modulation) for low power communication in WBAN(Wireless Body Area Network). It is known that the bandwidth efficiency of PSPM is lower than conventional PSK but the power efficiency increases. In this paper, we will analyze the BER performance of PSPM using data acquired from the sea trials. The BER of QPSK was $6.04{\times}10^{-2}$, PSPM was $3.5{\times}10^{-1}$. Also, PSNR of QPSK was 9.37 dB and in case of PSPM was 9.11 dB.