• Title/Summary/Keyword: 9/7 Filter

Search Result 481, Processing Time 0.03 seconds

Study on Gonad Dose and Utility according to Use of Filters During the Defecography (배변조영촬영에 있어 필터사용에 따른 생식선량 및 유용성에 관한 연구)

  • Jung, Hong-Ryang;Kim, Ki-Jung;Cho, Jung-Keun
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.5
    • /
    • pp.206-213
    • /
    • 2009
  • The study is to measure a variation of exposed dose on genital glands (ovary, testis) which are exposed to radiation during the defecography to diagnosis domain according to use of filters and to look into its utility. whose results are as follows: The measured values of dose were the left ovary 23.4mGy, the right ovary 7.5mGy, the testis 10.3mGy in case of not using filter at all, the left ovary 22.4mGy the right ovary 7.0mGy, the testis 9.5mGy in case of using an additional filter only, the left ovary 26.7mGy, the right ovary 8.4mGy, the testis 11.5mGy in case of using a defeco filter only and the left ovary 20.5mGy, the right ovary 6.2mGy, the testis 7.5mGy in case of using both an additional filter and a defeco filter, respectively. When comparing with the value in case of not using filter at all, the dose to the left ovary decreased by 10%, the dose to right ovary by 5% and the testis by 8% respectively in case of using an additional filter only. While the dose to the left ovary increased by 33%, the dose to right ovary by 9% and the testis by 12% respectively gonad a defeco filter only. And in case of using both an additional filter and a defeco filter, the dose to the left ovary decreased by 29%, the dose to right ovary by 13% and the testis by 28% respectively. In other words, the dose increased in case of using a defeco filter only while the dose decreased markedly on the rest conditions such as using an additional filter only, using a defeco filter only and using both an additional filter and a defeco filter.

Performance Prediction Analysis for the PDA Filter (해석적 방법에 의한 PDAF의 성능예측 분석)

  • 김국민;송택렬
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.9 no.7
    • /
    • pp.563-568
    • /
    • 2003
  • In this paper, We propose a target tracking filter which utilizes the PDA for data association in a clutter environment and also propose an analytic solution for ideal filter covariance which accounts for all the possible events in the PDA. Monte Carlo simulation for the proposed filter in a clutter environment indicates that the proposed analytic solution forms the true error covariance of the PDA Filter.

Median lifting optimization for lossy edge-dominant image compression

  • Quan, Do;Ho, Yo-Sung
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.2 no.1
    • /
    • pp.1-10
    • /
    • 2013
  • In JPEG2000, the Cohen-Daubechies-Feauveau (CDF) 9/7-tap wavelet filter is implemented using the conventional lifting scheme. On the other hand, this wavelet filter has two problems: the filter coefficients remain complex, and the conventional lifting scheme does not consider the image edges in the coding process. This paper proposes an effective lifting scheme to solve these problems. For this purpose, optimal 9/7-tap wavelet filters were designed in two steps. In the first step, the appropriate filter coefficients were selected. In the second step, a median operator was employed to consider the image edges. The experimental results with the median lifting scheme and the combination of filter optimization with the median lifting show that the proposed methods outperform the well-known CDF 9/7-tap wavelet filter of JPEG2000 on the edge-dominant images.

  • PDF

The Development of Filter for Environmental Improvement in Land Based Seawater Fish Farm II. Purification efficacy of Inlet and Outlet Seawater by Filter (필터의 개발을 통한 해수 육상수조식 양식장의 환경개선에 관한 연구 II. 필터 운행에 따른 유입수 및 배출수의 정화효과)

  • KANG Ju-Chan;PARK Soo-Il;KIM Seoung-Gun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.31 no.6
    • /
    • pp.914-919
    • /
    • 1998
  • This study was conducted to evaluate the purification efficacy by filter and ultra violet (UV) irradiation against inlet and outlet seawater of the land based fish farm. Purification efficacies for inlet seawater (50$\ell$/min) has been examined with filter of 60$\mu$m pore size and UV irradiation at an average dose 0.5 mWS/$cm^2$ for 5 months. For outlet seawater filter of 90 $\mu$m pore size only was used. Temperature, salinity, pH, $NO_3-N,\;NO_2-N,\;NH_4-N,\;PO_4-P$, DO and COD of inlet and outlet seawater in the system were not influenced. However, the removing rate of suspended solid and turbidity of inlet seawater were appeared to be $48.7\~65.6\%$ (average $51.9\%$) and $33/3\~42/5\%$ (average $34.8\%$) after passing through screen filter respectively. Also, germicidal efficiency to the total bacteris and Vibrio species were $16.7\~20.2\%$ (average $19.2\%$) $20.0\~21.9\%$ (average $20.9\%$) respectively after passing through UV irradiation. After passing through drum filter of 90$\mu$m pore size, suspended solid and turbidity of outlet seawater were appeared to be $42.7\~52.6\%$ (average $46.9\%$), $27.7\~29.9\%$ (average $28.3\%$), respectively.

  • PDF

A SoC design and implementation for JPEG 2000 Floating Point Filter (JPEG 2000 부동소수점 연산용 Filter의 SoC 설계 및 구현)

  • Chang Jong-Kwon
    • The KIPS Transactions:PartA
    • /
    • v.13A no.3 s.100
    • /
    • pp.185-190
    • /
    • 2006
  • JPEG 2000 is used as an alternative to solve the blocking artifact problem with the existing still image compression JPEG algorithm. However, it has shortcomings such as longer floating point computation time and more complexity in the procedure of enhancing the image compression rate and decompression rate. To compensate for these we implemented with hardware the JPEG 2000 algorithm's filter part which requires a lot of floating point computation. This DWT Filter[1] chip is designed on the basis of Daubechies 9/7 filter[6] and is composed of 3-stage pipeline system to optimize the performance and chip size. Our implemented Filter was 7 times faster than software based Filter in the floating point computation.

Low-power DWT filter bank design using comb filter and fourth-order polynomial (Comb 필터와 4차 다항식을 사용한 저전력 DWT 필터뱅크 설계)

  • Jang Young-Beom;Lee Won-Sang
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.42 no.1
    • /
    • pp.87-94
    • /
    • 2005
  • In this paper a low-power DWT(Discrete Wavelet Transform) design technique is proposed. As basic low-pass filter for analysis bank, comb filter is utilized, and in order to improve frequency response for the comb filter, a fourth order polynomial is also proposed. Another filters are designed by using perfect reconstruction conditions. The lowpass filter coefficients of the analysis filter bank are optimized based on the cost function and perfect reconstruction condition. The number of the multiplications and MSE(Mean Squared Error) performance of the proposed DWT filter bank are compared with those of the JPEG2000 (9, 7) filter bank. It is shown that number of multiplications of the proposed filter bank are saved with 33.3%, and MSE values of the proposed filter bank are also superior to those of the JPEG2000 (9, 7) filter bank.

High Temperature Superconducting Pseudo-Lumped Element Bandpass Filter

  • Choi, Young-Hwan;Kim, Hong-Teuk;Moon, Seung-Hyun;Lee, Seung-Min;Oh, Byung-Du;Min, Byoung-Chul
    • 한국초전도학회:학술대회논문집
    • /
    • v.9
    • /
    • pp.107-111
    • /
    • 1999
  • A high-temperature superconducting 1.78 GHz bandpass filter, designed for PCS applications, is presented. The structure consists of microstrip pseudo-lumped elements, which make the miniaturization of the filter possible. A 5-pole microstrip filter can be realized on 37 mm ${\times}$ 9 mm LaAlO$_3$ substrate, using double-sided high-temperature superconducting YBa$_2Cu_3O_{7-{\delta}}$ thin film. This filter shows 0.7% fractional bandwidth, 0.3 dB insertion loss, and 12 dB return loss in the passband at 60 K.

  • PDF

High Power Cavity Type Tunable Filter Using Switch for 1.5 GHz Band (Switch를 이용한 1.5 GHz 대역 고출력 Cavity 기반 Tunable Filter)

  • Ahn, Sehoon;Lee, Minho;Park, Jongcheol;Jeong, Gyetaek
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.1
    • /
    • pp.1-7
    • /
    • 2016
  • In this paper, the tunable filter based on high power cavity using mechanical switch for 1.5 GHz band is presented. The LPF is inserted to eliminate the spurious wave, coupler is embeded to extract the output power, and then the tunable filter system is configured using mechanical switch. The LPF obtains attenuation over 40 dB between 4 GHz and 12.75 GHz, Coupler is satisfied with coupling value 40 dB and coupling isolation over 55 dB. The tunable filter system using mechanical switch obtains insertion loss 0.88 dB at bypass mode between 1,495.9 MHz and 1,510. 9 MHz, 3.29 dB at fil mode between 1,495.9 MHz and 1,500.9 MHz. It is also satisfied with output power of 132 W at the center frequency 1,498.4 MHz, and switching time below 10 ms.

CenterTrack-EKF: Improved Multi Object Tracking with Extended Kalman Filter (CenterTrack-EKF: 확장된 칼만 필터를 이용한 개선된 다중 객체 추적)

  • Hyun-Sung Yang;Chun-Bo Sim;Se-Hoon Jung
    • Smart Media Journal
    • /
    • v.13 no.5
    • /
    • pp.9-18
    • /
    • 2024
  • Multi-Object trajectory modeling is a major challenge in MOT. CenterTrack tried to solve this problem with a Heatmap-based method that tracks the object center position. However, it showed limited performance when tracking objects with complex movements and nonlinearities. Considering the degradation factor of CenterTrack as the dynamic movement of pedestrians, we integrated the EKF into CenterTrack. To demonstrate the superiority of our proposed method, we applied the existing KF and UKF to CenterTrack and compared and evaluated it on various datasets. The experimental results confirmed that when EKF was integrated into CenterTrack, it achieved 73.7% MOTA, making it the most suitable filter for CenterTrack.

Design and Fabrication of Diplexer using Lumped Elements (집중 소자를 이용한 다이플렉서 설계 및 제작)

  • Park, Yong-Wook
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.7 no.1
    • /
    • pp.9-14
    • /
    • 2012
  • In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively.