• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.361-368
• /
• 2022

In this study, the normal group and possible sarcopenia(PS) group were divided by the criteria for sarcopenia diagnostic based on the 7th period data of the National Health and Nutrition Examination Survey. An independent t-test and logistic regression was performed for the difference between the two groups. As a result, the PS group was older, and height, weight, and BMI were all lower. The waist circumference was significantly lower in men but significantly higher in women. According to the quality of life by domain, the frequency of impairment in daily activities in exercise capacity was 8.28 fold in men and 15.52 fold in women. In addition, aerobic exercise regularity was 19% and 26% lower in the PS, and strength exercise regularity was practiced was 52% and 43% lower.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.400-404
• /
• 2000

All-optical clock recovery from a 10 Gb/s RZ signal has been demonstrated using an actively mode-locked figure-eight laser incorporating a semiconductor optical amplifier in the loop-mirror scheme. Optical pulses with 10 ps pulse width were modulated by a LiNb03 external modulator at $2^{23}-1$ PRES and injected into the clock recovery circuit to extract optical pulses with 12 ps width. Regeneration of the original bit pattern has been accomplished by modulating the recovered clock with the same modulator, and no power penalty was observed at $10^{11}$..

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.58-63
• /
• 1999

A 10 GHz harmonically mode-locked semiconductor-fiber ring laser was implemented using a semiconductor optical amplifier at $1.5\mu\textrm{m}$ The laser pulse has 13~18 ps pulse duration, 0.4~0.6 nm spectral width and was positively chirped. The output pulse with an average power of 4 dBm was compressed to 6.8 ps using 2 km long standard single mode optical fiber.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.201-208
• /
• 2000

In the transmitter of optical communication systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 4:1 (4-channels) time-division multiplexer using SiGe HBT with emitter size of 2x8um2. The operation speed is 100bps, the rise and fall times of 20-80% are 34ps and 34ps, respectively and the dissipation of power is 1.50W.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.267-273
• /
• 2013

We evaluated the morphological characteristics of 79 popcorn inbred lines, which were developed to breeding popcorn variety at Maize Experiment Station, Gangwon Agricultural Research and Extension Services, by examining ten quantitative and three qualitative characteristics. In the survey of 3 qualitative traits for 79 popcorn inbred lines, most inbred lines respectively showed purple (46 inbred lines) at tassel color (QL1), green (55inbred lines) at silk color (QL2) and green (75 inbred lines) at stem color (QL3). While, on the survey of 10 quantitative traits among 79 popcorn inbred lines, they showed the morphological variation in plant height (QN1, $174.2{\pm}34.9$ cm), ear height (QN2, $103.4{\pm}24.7$ cm), ear length (QN3, $9.4{\pm}3.0$ cm), kernel setting length (QN4, $8.4{\pm}2.6$ cm), ear thickness (QN5, $24.9{\pm}7.7$ mm), ear row number (QN6, $14.0{\pm}2.3$ number), ear weight (QN7, $36.5{\pm}26.0$ g), kernel weight (QN8, $30.9{\pm}19.3$ g), 100 kernel weight (QN9, $10.4{\pm}3.8$ g) and germination rate (QN10, $95.3{\pm}8.1%$), respectively. As a result, 5 inbred lines (PS0-001, PS0-003, PS1-002, PS1-003, PS2-009) in the 79 popcorn inbred lines have showed comparatively high values for the five quantitative traits. On the principal component analysis, silk color (QL2), ear length (QN3), kernel setting length (QN4), ear thickness (QN5), ear weight (QN7), kernel weight (QN8) and 100 kernel weight (QN9) greatly contributed in positive direction on the first principal components, whereas tassel color (QL1), stem color (QL3), ear height (QN2) and ear row number (QN6) contributed in negative direction on the first principal component. In addition, plant height (QN1), ear height (QN2), and kernel weight (QN8) contributed in positive direction on the second principal component, and also tassel color (QL1), silk color (QL2), ear length (QN3), ear row number (QN6) and 100 kernel weight (QN9) contributed in negative direction on the second principal component.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.180-186
• /
• 1987

Cell suspensions of two isolates of Pseudomonas syringae. PS8401 from sweet persimon and PS8402 from tea plant, were active in ice nucleation at -2.5 and $-3.8^{\circ}C$, respectively. Ice nucleation at those temperature was, using micropipette method, detected in suspensions ($10^8$ olony forming unit/ml of distilled water) of cells that had been grown on nutrient agar supplemented with $2.5\%$ glycerol. Using the same method, on the other hand, the freezing temperature of distilled water only was approx. $-21.8^{\circ}C$, and those of various plant saps including corn were lower than $-11.6^{\circ}C$. Corn seedlings sprayed with cell suspensions $(10^8\;cfu/ml)$ of nutrient broth) of PS8401 began to be damaged at $-2^{\circ}C$ and were almost completely damaged at $-4^{\circ}C$, whereas seedlings sprayed with nutrient broth only were not injured until the temperature down to $-9^{\circ}C$. Amounts of frost damage measured 48 hr after application of PS8401 suspensions increased as applied bacterial cell densities were increased. Ice-nucleation activity of the cell suspensions in vitro increased with increasing the number of cells in suspension. The activity also affected by growth-medium composition or growth-temperature. Ice nucleation thus occured at -4.0, -4.4 and $-7.2^{\circ}C$ in suspensions $(10^2\;cfu/ml)$ of PS8401 that had been grown at$25\%$ nutrient agar with $2.5\%$ glycerol, nutrient agar with $2.5\%$ glucose and nutrient agar only, respectively, and occured at -4.0 and $-7.6^{\circ}C$ in suspensions $(10^2\;cfu/ml)$ of PS8401 hat had been grown on nutrient agar with $2.5\%$ glycerol at $15\~25^{\circ}C$ and $30^{\circ}C$, respectively.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.115-121
• /
• 1999

The effect of storage temperature and time on the contents of metal (Pb, Sn and Fe), vitamin C, color and pH was studied for canned pineapple juice (PJ) and pineapple slice (PS) which were stored for 120 hours at 5 and 2$0^{\circ}C$ and analyzed at 24 hours intervals. The results are as follows; 1. The metal contents of PJ and PS were in the rank of 24<48<72<96<120 hours by storage time at 5 and 2$0^{\circ}C$. These contents were increased to 44.1%/24 hrs of Ph, 18.0%/24 hrs of Sn, 34.6%/24 hrs of Fe but decreased to 6.0%/24 hrs of vitamin C in PJ and PS during 120 hrs. Storage times were correlation to contents of metal and pH but was not correlation to vitamin C contents. These were increased to 37.7%/24 hrs of Pb, 18.8%/24 hrs of Sn, 34.6%/24 hrs of Fe, but decreased to 6.0%/24 hrs of vitamin C. 2. These were increased to 10.6% of Pb, 3.7% of Sn, 11.3% of Fe in PJ and to 33.7% of Pb, 4.8% of Sn, 37.6% of Fe in PS at 2$0^{\circ}C$ than 5$^{\circ}C$ but vitamin C contents were decreased to 8.2% in PJ and 2.7% in PS at 2$0^{\circ}C$ than 5$^{\circ}C$. This fact suggests that more attention be paid in handling canned PJ and PS after opening in order to avoid the decreasing vitamin C and the hazard from Pb, Sn, Fe. 3. Changing factors in Pb, Sn, Fe and vatiamin C content were in the rank of storage temperature$0^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.677-684
• /
• 2021

This paper presents a time-to-digital converter for measuring absolute time differences. The time-to-digital converter was designed and fabricated in 0.18-um CMOS technology and it can be applied to Light Detection and Ranging system which requires long time-cover range and 50ps time resolution. Since designed time-to-digital converter adopted the reference clock of 625MHz generated by phase locked loop, it could have absolute time resolution of 50ps after automatic calibration and its cover range was over than 800ns. The time-to-digital converter adopted a counter and chain delay lines for time measurement. The counter is used for coarse time measurement and chain delay lines are used for fine time measurement. From many times experiments, fabricated time-to-digital converter has 50 ps time resolution with maximum INL of 0.8 LSB and its power consumption is about 70 mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.25-30
• /
• 2007

In this paper, we proposed a new burst-mode optical transmitter structure which is suitable for high data rate operation such as Gb/s operation. With this structure we made a 1.25Gb/s burst-mode optical transmitter including a digitally controlled APC circuit for EPON systems using commercial 0.8m BiCMOS technology. It well functioned at 1.25Gb/s and showed good eye patterns with 53.3ps jitter, 191ps rise time and 258ps fall time. To characterize the APC function we measured optical output power as increasing external voltage VREF. The optical power is linearlyproportional to VREF at the rate of 0.293mW/V.