• Journal of the Ergonomics Society of Korea
• /
• v.16 no.3
• /
• pp.37-48
• /
• 1997

It is very common for women wear shoes with a high heel. It has been known that the high heel could disfigure the foot shape and cause various joint problems including back pain. However, few quantitative studies have been conducted. Therefore, in this study, the low back muscle has been investigated in order to find fatifue effect due to different heights of the heel. In particular, 0, 4, 6 and 8cm heel and two different shapes of heel have been used for an experiment. Ten healthy female subjects volunteered for the study. Isometric Trunk Exertion Frame(ITEF) and Electromyography were used to measure tha Median Frequency via Spectral analysis. The results indicated that the heel height significantly affected the local muscle fatigue of the back. After post hoc analysis, it was found that a proper heel height ougth to be lower than 5cm not to have severely fatigued back muscle after a casual walk for an hour. Such results could be applies to female industrial workers in order to prevent a cumulative trauma disorder of the back, and also to design a female dress shoes minimizing low back fatigue.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.2
• /
• pp.123-136
• /
• 1996

IPSKCDNA gene(1.8 kbp) encoding rat brain IP3K enzyme contained Not I restric site in open reading frame. The Not I sequence, GCGGCCGC, was converted to GCAGCCGC by site-directed mutagenesis. The mutated IP3KcDNA was digested with EcoR I and ligated with EcoR I-restricted psp72·Not2 vector. The resulting psp72 · Not2-IP3KCDNA was digested with the Not I restriction enzyme and then subcloned into the Not I -digested PZIP · NeoSV(X) mammalian expression vector. The PZIP · NeoSV(X) -IPSKCDNA was transfected into CCL39 hamster lung fibroblast cells. The efficiency of the expressed IPSKCDNA gene was significantly higher than expected generally, not only a mean 5-fold increase in the amount of enzyme, but also 16-fold increase in enzyme activity from tractsfected CCL39 cells by the method of Western blot using anti-lP3K antibodies. Both distribution of IPSK in various rat tissues and biochemical properties were discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.43-45
• /
• 2005

For application of advanced high strength hot-rolled steels (i.e. DP590, DP780) to automotive lightweight chassis parts, various technologies from design to forming test, optimization of welding condition and investigation of coating properties were tried. The target part of this study was automotive rear sub frame and we could make $16.8\%$ weight reduction by reducing the material thickness and optimizing the design. In addition, the formability and weldability of the newly developed AHSS, DP780, were evaluated.

• Development and Reproduction
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2012

The reproduction of animals is a way to maintain their species and demands a large amount of energy. The golden hamsters are seasonal breeders whose reproductive activities are regulated by photoperiod (length of day time in a day). The photic information received is transported to the pineal gland via many steps. Melatonin produced by the pineal gland affects the reproductive neuroendocrine system to manage reproductive activities. The major regulator neurons, secreting gonadotropin-releasing hormone, integrate all kinds of information to govern the reproductive frame hypothalamuspituitary-gonad axis. The elements impinging on the neurons are recently outspread. Thus the present review is to briefly survey the elements discovered newly and subjected to the active research realm and their correlations, focusing on the regulation of reproduction in mainly male golden hamsters as a representative animal.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2015

Ultra-wide-angle wireless endoscopes are demonstrated in this paper. The endoscope is composed of an ultra-wide-angle camera module and wireless transmission module. A lens unit with the ultra-wide FOV of 162 degrees is designed and manufactured. The lens, image sensor, and camera processor unit are packaged together in a $3{\times}3{\times}9-cm3$ case. The wireless transmission modules are implemented based on UWB- and WiFi-based platform, respectively. The UWB-based module can transmit HD video to a computer in resolution of $2048{\times}1536$ (QXGA) and the frame rate of 15 fps in MJPEG compression mode. The maximum data transfer rate reaches 41.2 Mbps. The FOV and the resolution of the endoscope is comparable to a medical-grade endoscope. The FOV and resolution is ~3X and 16X higher than that of a commercial high-performance WiFi endoscope, respectively. The WiFi-based module streams out video to a smart device with th maximum date transfer rate of 1.5 Mbps at the resolution of $640{\times}480$ (VGA) and the frame rate of 30 fps in MJPEG compression mode. The implemented components show the feasibility of cheap medical-grade wireless electronic endoscopes, which can be effectively used in u-healthcare, emergency treatment, home-healthcare, remote diagnosis, etc.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.4
• /
• pp.9-16
• /
• 2002

In this paper we propose an extended billboarding method for rendering trees. It's difficult circumstance that PC renders forest by general polygon rendering in real-time, because tree object consists of tremendous leaves and limbs. Our method re-creates an appropriate texture image by 3D image warping equation each frame, and we use it for a billboarding method. For speed up, we use warping method with a image pyramid and image caching.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.407-410
• /
• 2005

For reducing DFC(Dynamic False Contour), we propose a new PDP driving method by rearrangement of sub-fields. The proposed method constructs a frame using 16 sub-fields for expressing 256 gray levels. Although the number of sub-fields increases, the display time increases compared to the conventional 8 sub-fields driving method. This increase in display time is achieved by properly using both selective writing and selective erasing for each sub-field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.815-820
• /
• 2008

Carrier frequency offset (CFO) is one of the most important problems in an orthogonal frequency division multiplexing (OFDM) system, which seriously degrades the performance of the systems due to its time-variant behavior. In this paper, the performance of a pilot-assisted fine CFO estimator in OFDM-based mobile WiMAX systems is analyzed. Analytical closed-form expression of the mean square error (MSE) of the post-FFT based CFO synchronization scheme is reported for time-variant fading channels. Taking into account the frame structure of the IEEE802.16e standard, simulation results are used to verify the theoretical analysis developed in this paper.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.39-48
• /
• 2010

The purpose of this study was to analyze air temperature decreasing effects by shading and ventilation at micro-scale experiment plots, especially focused on the Wet Bulb Globe Temperature (WBGT) in outdoor spaces. To monitor the time-serial changes of Dry-bulb Temperature (DT), Globe Temperature (GT) and Relative Humidity (RH) in the wind blocking and shading conditions, Two hexahedral steel frames were established on the open grass field, the dimension of each frame was 1.5m(W)${\times}$1.5m(L)${\times}$1.5m(H). Four vertical side of one frame was covered by transparent polyethylene film to prevent wind passing through (Wind break plot; WP). The top side of the other frame was covered with shading curtain which intercept 95% of solar light and energy (Shading plot; SP). And, Another vertical steel frame without any treatment preventing ventilation and sunlight was set up, which represents natural conditions (Control plot; CP). The major findings were as follows; 1. The average globe temperature (GT) was highest at WP showing $50.94^{\circ}C$ and lowest at SP showing $34.58^{\circ}C$. The GT of natural condition (SP) was $42.31^{\circ}C$ locating the midst between WP and SP. The difference of GT of each plot was about $8-16^{\circ}C$, which means the ventilation and shading has significant effect on decreasing the temperature. 2. WP showed the highest average dry-bulb temperature (DT) of $38.41^{\circ}C$ which apparently differ from SP and CP showing $31.94^{\circ}C$ and $33.15^{\circ}C$ respectively. The DT of SP and CP were nearly the same. 3. The average relative humidity (RH) was lowest at WP showing 15.21%, but SP and CP had similar RH 28.79%, 28.02% respectively. 4. The average of calculated WBGT were the highest at the WP ($27.61^{\circ}C$) and the lowest at the SP ($23.64^{\circ}C$). The CP ($25.49^{\circ}C$) was in the middle of the others. As summery, compared with natural condition (CP), the wind blocking increased about $2.11^{\circ}C$ WBGT, but the shading decreased about $1.84^{\circ}C$ WBGT. So It can be apparently said that the open space with much shading trees, sheltering furnitures and well-delivered wind corridor can reduce useless and even harmful energy for human outdoor activity considerably in outdoor spaces.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.2
• /
• pp.45-52
• /
• 2008

In today's construction, there has been an increase in the construction of high-rise buildings due to the need to maximize land usage. Framework affects not only the entire construction duration and cost, but also subsequency construction activities such as electrical, mechanical, and finishing works. Especially, proper formwork is a influential factor of productivity in the framwork of reinforced concrete construction. To that reason, a table form of system form is more frequently used than conventional form. However, an initial cost of the table form is high and a reused table form needs for workers to repair damaged table forms. Therefore, the goal of this study is to introduce euro-unit table form. The results from the application of euro-unit table form to high-rise residentia building construction are as follows : (1) The cost of producing table form reduced by 16%, and (2) The time of producing table form was slumped by 35%, and (3) The labor force needed for form work declined 21%.