• Clean Technology
• /
• v.16 no.2
• /
• pp.88-94
• /
• 2010

The physiological roles of various wavelength of light emitting diode (LED) on ‘Hayward’ kiwifruit experiencing after-ripening were investigated. Various wavelengths from LED light source were irradiated on kiwifruits kept in plastic bags or under open air at $25^{\circ}C$. During two weeks of storage, firmness of Hayward kiwifruits was decreased by $25^{\circ}C$ treatment than by $4^{\circ}C$ treatment. In the $25^{\circ}C$ storage condition, the firmness of kiwifruits was decreased by the treatment of 380 nm UV and 470nm white LED light source. Sweetness of kiwifruits treated with 380 nm UV LED and dark condition at $25^{\circ}C$ increased higher than $15^{\circ}$Brix. The acidity of kiwifruits under open air was decreased 52% by incubating at $25^{\circ}C$ with 660 nm red LED treatment. The acidity of kiwifruits in plastic bags was decreased 52.6, 55.6, 52.8% by the treatment of 440 nm blue, 470 nm white and 660 nm red LED light source, respectively, compared to that of kiwifruits incubated in darkness at $25^{\circ}C$. Decreased acidity irradiated by 660 nm red LED light source can be applied for regulating periods of the kiwifruit after-ripening process. LED light sources emit very narrow wavelength with a power-saving mode, therefore, the usage of these LED light source for regulating the after-ripening process can be classified as a clean biotechnology producing safe and environment-friendly kiwifruits.

• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.207-215
• /
• 2012

As one of photo dynamic therapies, the existing LED photo irradiation method with 635 nm continuous wave has most frequently been used for acne treatment, it suffered from a low energy efficiency and generation of a large amount of heat in tissues requiring improvement measures. In this thesis, a LED photo irradiation system for acne treatment has been designed using PWM(Pulse Width Modulation) mode to enhance the energy efficiency and prevent thermal destruction in tissues. System configuration consisting largely of timer module, PWM module, and photo transfer device has been designed with the use of 1 W LED at a wavelength of 660 nm for the photo transfer device to increase skin penetration depth for treatment of acne. Frequency and wave form generated by using PWM control was verified along with confirmation of output energy of 660 nm LED and surface temperatures of tissues, followed by evaluation of stable energy outputs and stability of tissues. The results indicated that whereas power loss was high and thermal destruction in tissues was exhibited when C.W mode was used to obtain the optical energy of 1 W LED at a wavelength of 660 nm for acne treatment, realization of PWM mode allowed lowering of power consumption for LED through pulse width modulation, and no occurrence of thermal destruction in tissues, suggesting that PWM mode is safer and more effective for treatment of acne than C.W mode.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.452-456
• /
• 2000

A measurement unit and signal processing algorithm have been developed for predicting arterial oxygen saturation noninvasively. The measurement set-up was composed of a probe including light source and photodetector, optical signal processing section, LED driving circuit, PC interface software for data acquisition and data processing software. Light from the LED's was irradiated onto the finger nail bed and transmitted light was measured at different wavelengths. An effective baseline correction method was developed and measured data were analyzed by using various data processing methods and prediction algOlithms. For performance evaluation, a pulse oximeter simulator (Bio- Tek Instrument Inc.) was used as reference. The best performance in terms of the correlation coefficient and the standard deviation was obtained under the following conditions; when the arterial signals were computed in terms of area rather than peak-valley difference, and when the algorithm calculating by $In(I_p/I_v)/I_{avr}$ value for pulsation waveform was used. In in vivo test, prediction was improved when the developed baseline correction method was used. In addition, wavelengths of 660 nm and 940 nm provided better linearity and precision than wavelengths of 660 nm and 805 nm. 05 nm.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2014

This research was performed to investigate the effect of light source and light quality in night break treatment on the growth and flowering of standard chrysanthemum. It was processed 4 hours (22:00-02:00) night break using LED 590, 610, 630, 660, 680nm and fluorescent lamp (mixed light of 480+540+610nm) in standard chrysanthemum 'Baekma' and 'Jinba' for 40 days from transplanting. The days to flower budding from short-day treatment of 'Baekma' were the longgest at fluorescent treatment (21.3 days) and were the shorttest at LED 590nm treatment (15.8 days) among all treatments. The days to flower budding from short-day treatment of 'Jinba' was longger with 18.0 days, 17.8 days, and 17.7 days at the fluorescent, LED 610nm, and 660nm treatments. And it was the shortest with 15.1 days in LED 590nm treatment. Similarly, the days to flowering from short-day treatment of 'Baekma' was the longgest with 56.9 days at fluorescent treatment, and was the shorttest in 51.6 days about LED 590 nm treatment. The days to flowering from short-day treatment of 'Jinba' was longer at fluorescent (56.0 days) and LED 660nm (56.7 days) treatments and was shortest at LED 590nm (52.9 days) among all treatments. Therefore, inhibition of flower bud initiation and flowering were the most effective under fluorescent treatment in case of 'Baekma', and fluorescent and LED 660nm treatments in case of 'Jinba'. The length and weight of cut flower of 'Baekma' and 'Jinba' were most excellent in fluorescent treatment in which the floral differentiation suppression effect was the best. Consequently, as to the growth and flowering of standard chrysanthemum, the treatment which was suitable as the light source and light quality for night break is regarded as the fluorescent lamp, and also under LED 660nm up to a certain level.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.7-7
• /
• 2019

우리나라에서의 대마는 마약류로 분류되어 기호용과 의료용 모두 법적인 제재를 받아왔으나 최근에 의료용 대마가 법적으로 허용이 되어 환자들에게 처방 받을 수 있게 되었다. 하지만 우리나라 사람들에게 대마는 환각성분을 가진 마약류로 깊이 인식되어 왔으며 의료용 대마에 대한 연구는 거의 전무한 실정이다. 노지재배에서 발생할 수 있는 범죄의 위험성, 자연교배에 의한 품질저하를 피할 수 있으며 재배조건(양액, 광조건, 광주기, 대기환경조성) 등을 제어할 수 있는 밀폐형 LED 식물공장은 의료용 대마 생산에 제일 적합한 모델이 될 수 있다. 식물체의 광합성은 가시광선 중 특정 파장 450nm 청색광과 660nm 적생광을 주로 이용하며 'LED (Light Emitting Diode) 발광다이오드'는 식물체의 광합성에 적합한 파장으로 광원을 조사할 수 있는 장점이 있다. 이러한 LED를 이용한 광합성은 식물체의 2차 대사물질 Anthocyanins, phenolic compounds 등의 향상과 생육에도 긍정적인 영향을 미치며 식물 뿐만 아니라 광합성을 하는 미세조류(micro algae)에서도 이용이 가능하며 해마토 코쿠스(Hematococcus)의 세포증식과 항산화물질 아스타잔틴(astaxathin)생산에 유용하게 쓰이고 있다. 최근 미국과 다른 나라에서도 기호용, 의료용 대마사업에 대한 관심이 높아지고 있으며 캐나다와 미국에서는 밀폐형 유리온실과 식물공장을 이용한 의료용 대마를 생산, 추출, 가공까지 하여 산업적인 영역을 넓히고 있는 실정이다. 특히, 실내재배에서는 광원이 필수적인 요소이며 식물생육에 선택적인 파장을 조사할 수 있는 LED와 재배조건을 정밀하게 제어할 수 있는 밀폐형 식물공장을 이용한 의료용 대마 생산에 대한 연구가 절실히 필요한 시점이다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.4
• /
• pp.413-420
• /
• 2017

The increase in the number of mud shrimps Upogebia major is a concern because of their negative effects on shellfish aquaculture, including Manila clam Venerupis philippinatum along the west coast of Korea. This study developed a behavioral analysis system for aquatic animals using a set of monochromatic light-emitting diode (LED) modules covering the visible light range at similar intervals. Movements of mud shrimp were monitored using a tracking system under illumination with infra-red light and an LED of 660 nm wavelength without provoking stimulation. The minimum light intensity needed to induce a photoresponse by the mud shrimp was $10{\mu}mole/m^2/s$ under the conditions tested. Of the six kinds of LED illuminations tested, the most sensitive response was obtained with illumination with the 505 nm LED, followed in order by LEDs with peak wavelengths of $525nm{\fallingdotseq}465nm$ > $405nm{\fallingdotseq}590nm$ > 660 nm. These findings should help to identify LED sources that efficiently induce movement of the mud shrimp and also for monitoring movement without stimulating.

• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.9-15
• /
• 1999

The oxygen saturation of blood can be measured by the difference absorption in optical spectra of Hb and Hb0$_2$, as the well known previous study. In this study we developed the non-invasive oxygen measurement device for diagnosis of peripheral vascular disease in lower extremity using infrared and red LED which produce a peak spectral emission at a wavelength of 660 nm, and 940 nm. To evaluate the clinical application of the oxygen measurement device, we performed lower extremity study to measure the oxygen changes in response to physiological changes within biological tissue. The results showed that oxygen saturation of blood in biological tissue can be monitored from the separation arrangement light source and detector.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.402-408
• /
• 2011

BACKGROUND: Effect of various light wavelength and plant defense molecules were evaluated on the hardness and the contents of free amino acid including ${\gamma}$-aminobutyric acid (GABA) in soybean sprouts. METHODS AND RESULTS: Germinating soybean seeds were treated with various single wavelength of light (380, 440, 470, and 660 nm) or without light at $25^{\circ}C$ for six days. Soybean seeds were also treated with stress-signaling molecule ethephon or $H_2O_2$ at the same time. Soybean sprouts treated with 470 nm substantially raised the hardness almost two times than the control. The free amino acid contents were higher in 470 nm and $H_2O_2$ treated soybean seeds than the control. Nutritionally beneficial GABA contents were increased by the treatments of 470 nm, 440 nm, ethephon, and $H_2O_2$. CONCLUSION: These results suggest that the hardness and the contents of amino acids can be regulated by stimuli, which stimuli could be composed of various wavelength and plant defense molecules. Especially, single wavelength 470 nm illumination has the effect of increasing GABA contents with increased hardness.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.596-606
• /
• 2016

The growth and contents of anthocyanins and ascorbic acid in lettuce(Lactuca sativa L., 'Jeokchima') as affected by supplemental UV-A LED irradiation under different light quality and photoperiod conditions were analyzed in this study. Five light qualities, namely B (blue LED), R (red LED), BUV (blue LED+UV-A LED), RUV (red LED+UV-A LED) and Control (white fluorescent lamps) with photoperiods of 12/12 hours (day/night), 16/8 hours, or 20/4 hours were provided to investigate the effects of light quality and photoperiod on the growth and accumulation of anthocyanins and ascorbic acid in lettuce leaves. As measured 28 days after transplanting, the number of leaves, leaf length, leaf width, leaf area, shoot fresh weight and dry weight of lettuce were significantly affected by light quality and photoperiod. The number of leaves, leaf length, leaf width, leaf area, shoot fresh weight and dry weight of lettuce grown under R treatment increased with increasing light period. By contrast, leaf development was inhibited, but chlorophyll content increased, under B treatment. Supplemental UV-A irradiation significantly decreased leaf length, leaf width, leaf area and shoot fresh weight. Anthocyanins in lettuce increased significantly with decreasing dark period under B treatment. A synergistic effect of supplemental UV-A LED irradiation on anthocyanins accumulation was found for lettuce leaves grown under R treatment but not B treatment. Ascorbic acid in lettuce was greatly affected by photoperiod. Ascorbic acid content at BUV and RUV treatments increased by 20-30% compared to without UV-A LED irradiation. From these results, it was concluded that growth and contents of anthocyanins and ascorbic acid in lettuce are significantly affected by supplemental UV-A LED irradiation. The results obtained in this study will be informative for efforts to improve the nutritional value of leafy vegetables grown in plant factories.