• Structural Engineering and Mechanics
• /
• 제36권6호
• /
• pp.669-678
• /
• 2010

In general means, the stress concentration problem of elastic plate with a rectangular hole can be investigated by numerical methods, and only approximative results are derived. This paper deduces an analytical study of the stress concentration due to a rectangular hole in an elastic plate under bending loads. Base on classical elasticity theory and FEM applying the U-transformation technique, the uncoupled governing equations with 3-DOF are established, and the analytical displacement solutions of the finite element equations are derived in series form or double integral form. Therefore, the stress concentration factor can then be discussed easily and conveniently. For the plate subjected to unidirectional bending loads, the non-conforming plate bending element with four nodes and 12-DOF is taken as examples to demonstrate the application of the proposed method. The inner force distribution is obtained. The solutions are adequate for the condition when the hole is far away from the edges and the thin plate subjected to any transverse loadings.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.323-332
• /
• 2004

This paper concerns about a study on dynamic responses of tracked vehicle on soft cohesive soil. For dynamic analyses of tracked vehicle, two different models were adopted, i.e. a single-body model and a multi-body model. The single-body vehicle model was assumed as a rigid body with 6-dof. The multi-body vehicle was modeled by using a commercial software, RecurDyn-LM. For the both models properties of cohesive soft soil were modeled by means of three relationships: pressure to sinkage, shear displacement to shear stress, and shear displacement to dynamic sinkage. Traveling performances of the two tracked vehicle models were compared through dynamic analyses in time domain.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.677-688
• /
• 2008

In this paper, the general problem of impedance control for a robotic manipulator with a moving flexible base is addressed. Impedance control imposes a relation between force and displacement at the contact point with the environment. The concept of impedance control of flexible base mobile manipulator is rather new and is being considered for first time using singular perturbation and new sliding mode control methods by authors. Initially slow and fast dynamics of robot are decoupled using singular perturbation method. Slow dynamics represents the dynamics of the manipulator with rigid base. Fast dynamics is the equivalent effect of the flexibility in the base. Then, using sliding mode control method, an impedance control law is derived for the slow dynamics. The asymptotic stability of the overall system is guaranteed using a combined control law comprising the impedance control law and a feedback control law for the fast dynamics. As first time, base flexibility was analyzed accurately in this paper for flexible base moving manipulator (FBMM). General dynamic decoupling, whole system stability guarantee and new composed robust control method were proposed. This proposed Sliding Mode Impedance Control Method (SMIC) was simulated for two FBMM models. First model is a simple FBMM composed of a 2 DOFs planar manipulator and a single DOF moving base with flexibility in between. Second FBMM model is a complete advanced 10 DOF FBMM composed of a 4 DOF manipulator and a 6 DOF moving base with flexibility. This controller provides desired position/force control accurately with satisfactory damped vibrations especially at the point of contact. This is the first time that SMIC was addressed for FBMM.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.263-268
• /
• 2015

This paper describes lost motion analysis for a novel 6-DOF ultra-precision positioning stage. In the case of flexure hinge based precision positioning stage, lost motion is generated when the displacement of actuator is not delivered completely to the end-effector because of the elasticity of flexure hinge. Consequently, it is need to compute amount of lost motion to compensate the motion or to decide appropriate control method for precision positioning. Lost motion analysis for the vertical actuation unit is presented. The analysis results are presented in two ways: analytic and numerical analyses. It is found that they closely coincide with each other by 1% error. In finite element analysis result, the amount of lost motion is turned out to be about 3%. Although, the amount is not so large, it is necessary procedure to check the lost motion to establish the control method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 추계학술대회
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1151-1172
• /
• 2014

This paper presents a user programmable computational/control platform developed to conduct real-time hybrid simulation (RTHS). The architecture of this platform is based on the integration of a real-time controller and a field programmable gate array (FPGA).This not only enables the user to apply user-defined control laws to control the experimental substructures, but also provides ample computational resources to run the integration algorithm and analytical substructure state determination in real-time. In this platform the need for SCRAMNet as the communication device between real-time and servo-control workstations has been eliminated which was a critical component in several former RTHS platforms. The accuracy of the servo-hydraulic actuator displacement control, where the control tasks get executed on the FPGA was verified using single-degree-of-freedom (SDOF) and 2 degrees-of-freedom (2DOF) experimental substructures. Finally, the functionality of the proposed system as a robust and reliable RTHS platform for performance evaluation of structural systems was validated by conducting real-time hybrid simulation of a three story nonlinear structure with SDOF and 2DOF experimental substructures. Also, tracking indicators were employed to assess the accuracy of the results.

• 한국시뮬레이션학회논문지
• /
• 제26권1호
• /
• pp.13-19
• /
• 2017

국내 유도무기 개발과정에서 가장 일반적으로 적용되는 M&S 도구는 유도탄의 각 구성품 및 공력특성 모델을 반영한 6자유도 비행모의 프로그램이다. 하지만 3세대 대전차 유도무기와 같이 영상탐색기가 적용되는 경우 6자유도 비행모의만으로 다양한 조건 하에서의 체계 성능을 확인할 수 없다. 영상탐색기의 추적 성능은 표적의 대조비나 온도차뿐만 아니라 유도탄 거동에 따른 표적 위치 이격, 회전 등에 민감하게 반응하기 때문에 유도무기 개발 과정에서 영상 추적 성능과 유도탄 비행성능을 통합하여 분석할 수 있는 M&S 도구가 요구된다. 3세대 대전차 유도무기인 현궁 개발 과정에서는 형상 설계 단계부터 '합성영상 생성 S/W'-'영상추적기'-'비행모의 프로그램'을 연동한 통합비행 M&S 도구를 개발, 적용하였다. 통합비행 M&S 도구 기반으로 몬테카를로 시뮬레이션을 수행한 후 체계 주요 성능 지수, 즉 명중률 비교를 통해 적합한 형상을 선정하였다. 본 논문에서는 3세대 대전차유도무기 형상설계를 위한 고려요소와 함께 통합비행 M&S 방법론 및 분석 결과를 기술하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.296-301
• /
• 2005

This paper describes the kinematics, dynamics and control of a 6-DOF shaking table with a bell crank structure, which converts the direction of reciprocating movements. In this shaking table, the bell crank mechanism is used to reduce the amount of space needed to install the shaking table and create horizontal displacement of the platform. In kinematics, joint design is performed using $Gr{\ddot{u}}bler's$ formula. The inverse kinematics of the shaking table is discussed. The derivation of the Jacobian matrix is presented to evaluate singularity conditions. Considering the maximum stroke of the hydraulic actuator, collision between links and singularity, workspace is computed. In dynamics, computations are based on the Newton-Euler formulation. To derive parallel algorithms, each of the contact forces is decomposed into one acting in the direction of the leg and the other acting in the plane orthogonal to the direction of the leg. Applying the Newton-Euler approach, the solution of inverse dynamics is almost completely parallel. Only one of the steps-the application of the Newton-Euler equations to the platform-must be performed on one single processor. Finally, the efficient control scheme is proposed for the tracking control of the motion platform.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1632-1642
• /
• 1994

The Stewart Platform is a six-degree-of-freedom in-parallel-actuated manipiulator mechanism. The kinematic behavior of parallel mechanisms shows inverse characteristics as compared that of serial mechanisms; i.e, the inverse kinematic problem of Stewart Platform is straightforward, but no closed form solution of the forward kinematic problem has been previously presented. Thus it is difficult to calculate the 6 DOF displacement of the platform from the measured lengths of the six actuators in real time. Here, a real-time estimation algorithm which solves the Stewart Platform kinematic problem is proposed and tested through computer simulations and experiments. The proposed algorithm shows stable convergence characteristics, no estimation errors in steady state and good estimation performance with higher sampling rate. In experiments it is shown that the estimation result is the same as that of simulation even in the presence of measurement noise.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.76-82
• /
• 2005

In this paper, validation of Driver Steering Model has been conducted. The comparison between the simulation model and vehicle test results shows that the model is very feasible for describing combined human driver and actual vehicle dynamic behaviors. The 3D vehicle model is consisted of 6-DOF sprung mass and 4-quarter car model for vehicle body dynamics. Powertrain model including differential gear and Pacejka tire model are applied. The driver steering model is also validated with vehicle test result. The driver steering model is based on angle and displacement error from the desired path, recognized by driver.