• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.17-17
• /
• 2005

• The Journal of Korean Association of Computer Education
• /
• v.11 no.6
• /
• pp.39-51
• /
• 2008

There exist many differences between the revised Informatics curriculum in 2007 and the current Informatics curriculum in junior-high school. The revised Informatics curriculum emphasized on the computer science principles and problem solving ability instead of the application program usage. Since the revised Informatics curriculum introduces a new section called 'Problem-solving methods and procedures', which is not included in the current computer curriculum, the development of achievement standards and assessment standards were needed in this section. This paper developed the achievement standards and assessment standards in 'Problem-solving methods and procedures' section in order to give the guideline of the teaching strategies and evaluation methods in the revised Informatics curriculum.

• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.1-6
• /
• 2012

On this study, as a Human Factor(HF)'s point of view, typical PVI(Pilot Vehicle Interface) evaluation for small airplane cockpit design, PVI evaluation items and procedures to show compliance to KAS Part 23 "Airworthiness Standards : Normal, Utility, Acrobatic, And Commuter Category Airplanes" are introduced and reviewed. This study is based on the experience of Korean small civil airplane development and certification program.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.301-308
• /
• 2007

Sesame has usually been harvested manually in korea. The conventional sesame harvest procedures consists of cutting, binding, drying and pod shattering. The procedures of drying and shattering are repeated $2{\sim}3$ times. By manual works of this conventional shattering, it was found that some extent of pods were has always remained unopened. Therefore, this study was conducted to find a way to save the labor of sesame shattering by use of a drying device; a prototype of shattering machine was developed and tested the performance. The developed prototype consists of several parts: a continuous horizontal inlet using a chain conveyer, a shattering by a shocking agitator, a rotating cone for shattering of remaining closed pods, and a winnow. The shattering ratio measured by this prototype was 90.3%, 6.4% and 3.3% at the first, second and third shattering step, respectively. We found that in contrast to the conventional method which required at least 3 times operations for complete shattering, this shattering prototype with the condition of sufficient dried sesame pod offered more than 90% of shattering ratio in the first operation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.6
• /
• pp.1425-1435
• /
• 2019

The expanded application of digital controls has raised the issue of cyber security for nuclear facilities. To cope with this, the cyber security technical standard RS-015 for Korean nuclear facilities requires nuclear system developers to apply security functions, analyze known vulnerabilities, and test and evaluate security functions. This requires the development of procedures and methods for testing the suitability of security functions in accordance with the nuclear cyber security technical standards. This study derived the security requirements required at the device level by classifying the details of the technical, operational and administrative security controls of RS-015 and developed procedures and methods to test whether the security functions implemented in the device meet the security requirements. This paper describes the process for developing security function compliance test procedures and methods and presents the developed test cases.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2014

Though the functions and operational procedures of current ACAS-II are upgraded several times owing to technical advancement, so far the mid-air collision accidents never come to an end. Recently to solve the major issues of ACAS-II, ICAO began to develop a future ACAS (Airborne Collision Avoidance System) by the year 2015. Accordingly in order to prepare for international standardization of the future ACAS, in this paper a policy is proposed for domestic implementation of the future ACAS based on the results from studying the technical standards and future development trends of ACAS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.731-738
• /
• 2017

Twin-hulls frequently incur structural damage at connecting members between the hull and deck induced by pitching motions during voyages. so, reasonable reinforcement is necessary around vulnerable spots such as corner knuckle, the chine bottom and inner hull. Since guidelines for structural design are not clear, engineers often respond by reinforcing plate thickness, changing stiffener sizes and reducing frame spacing, etc. These members constitute about 85 % of the longitudinal dimensions of the ship, so it is necessary to locally reinforce certain points to minimize weight stress, and also solve construction cost problems while securing the freeboard margin. Therefore, we developed a new program by analyzing the structural design procedures for the twin car-ferries based on Korean Register of Shipping (KR) High Speed Craft Rules, identifying items that need to be added. In order to ensure the reliability of buckling estimations for procedures and design programs, we conducted a comparative study with other standards and confirmed that differences were minimal.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.420-424
• /
• 2009

Since the sesame pod gets open gradually from the lower to upper parts of the stem due to its different maturity during cutting and binding of sesame, at the conventional work for shattering, the procedures of drying and shattering are repeated two or three times. Therefore, in this study, a drying stand with transparent plastic cover was developed to complete the drying and shattering at the same time. Owing to the developed drying stand, simple drying work, the area for drying was reduced prevention of sesame seeds from loss and rain are available. The performance of developed drying stand was evaluated. Before the drying stand was developed, the conventional method and shattering machine for shattering sesame required at least three times of operation for complete shattering. But After drying stand was developed, the complete shattering works was possible with only one time shattering operation. Finally, the developed drying stand could prevent approximately 5% of the total sesame seed production from loss during drying and shattering works.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.373-379
• /
• 2022

KASS (korea augmentation satellite system) is an SBAS (satellite based augmentation system) that must ensure the performance of aviation service in accordance with the International Civil Aviation Organization's SARPs (standards and recommended practices) Annex 10 - Aeronautical Telecommunications. In order to guarantee the target service performance, the operating system must be operated, maintained and managed stably, and a maintenance system must be established for this purpose. From the maintenance point of view, the KASS subsystems were developed to consist of replacement units, and the maintenance organization and procedures to manage those subsystems and units were defined. In addition, the maintenance task for each the replacement unit was developed to ensure the availability performance required for the successful KASS operation, and the developed tasks were verified to sufficiently cover the activities to maintain the previously defined replacement units. The maintenance tasks developed through this study will be continuously verified in the actual operation preparation process prior to the full-scale provision of aviation services in the end of 2023, and will be updated accordingly.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.420-433
• /
• 2023

With the development of ICT technologies, various systems and services based on data have been introduced. Also, raising the importance of technologies that provide trust to a data, infrastructure, and services. for ICT services. However, in the existing ICT service environment, there is no way to objectively judge and manage the trust of various components (content, infrastructure, process, service provider, etc) that constitute a specific service, and there is a limitation that we can only rely on the service provider's own quality standards. This paper provides requirements, functional archtecture, and procedures for providing reliable ICT services from the perspective of ITU-T international standards. Trust-enabled service provisioning adds additional functions for providing trust to existing ICT service entities (service resources, stakeholders, and users), collecting, analyzing, and providing trust related information. Therefore, a users can consider the trust of various service components based on analyzed trust information based on their trust requirements.