• Wind and Structures
• /
• 제10권6호
• /
• pp.495-510
• /
• 2007

Wind pressure data have been collected on the tiled roof of a full-scale test house at Silsoe in the UK. The tiled roof was of conventional UK construction with a batten-space and bitumen-felt underlay beneath the interlocking concrete tiles. Pressures were monitored on the outer surface of selected tiles, at several locations within the batten-space, and beneath the underlay. Data were collected both with and without ventilator tiles installed on the roof. Little information appears to exist on the share of wind load between tiles and underlays which creates uncertainty in the design of both components. The present study has found that for the critical design case of maximum uplifts it would be appropriate to assign 85% of the net roof load to the tiles and 15% to the underlay when an internal pressure coefficient of -0.3 is used, and to assign 60% to the tiles and 50% to the underlay when an internal pressure coefficient of +0.2 is assumed (an element of design conservatism is inherent in the apparent 110% net loading indicated by the latter pair of percentage values). These findings indicate that compared with loads implied by BS 6399-2, UK design loads for underlay are currently conservative by 25% whilst tile loads are unconservative by around 20% in ridge and general regions and by around 45% in edge regions on average over roof slopes of $15^{\circ}-60^{\circ}$.

• 한국전자파학회논문지
• /
• 제17권6호
• /
• pp.501-510
• /
• 2006

본 논문에서는 플랜지된 평행 평판 도파관의 슬릿을 통한 도체 스트립과의 전자기적인 결합을 연구하였다. 슬릿의 전계와 스트립의 유기 전류에 관한 결합 적미분 방정식을 유도하고 모멘트 방법으로 풀었다. 몇 가지 슬릿을 통한 최대 결합 현상들의 특성을 도체 스트립의 위치, 동작 주파수, 스트립의 길이 등 다양한 파라미터에 대한 슬릿의 등가 어드미턴스와 결합 전력의 변화를 통해 조사하였다.

• ETRI Journal
• /
• 제36권3호
• /
• pp.510-513
• /
• 2014

A Q-band pHEMT image-rejection low-noise amplifier (IR-LNA) is presented using inter-stage tunable resonators. The inter-stage L-C resonators can maximize an image rejection by functioning as inter-stage matching circuits at an operating frequency ($F_{OP}$) and short circuits at an image frequency ($F_{IM}$). In addition, it also brings more wideband image rejection than conventional notch filters. Moreover, tunable varactors in L-C resonators not only compensate for the mismatch of an image frequency induced by the process variation or model error but can also change the image frequency according to a required RF frequency. The implemented pHEMT IR-LNA shows 54.3 dB maximum image rejection ratio (IRR). By changing the varactor bias, the image frequency shifts from 27 GHz to 37 GHz with over 40 dB IRR, a 19.1 dB to 17.6 dB peak gain, and 3.2 dB to 4.3 dB noise figure. To the best of the authors' knowledge, it shows the highest IRR and $F_{IM}/F_{OP}$ of the reported millimeter/quasi-millimeter wave IR-LNAs.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.502-510
• /
• 1997

A disturbance rejection controller using eccentricity filtering and LQ control techniques is proposed to alleviate the effecto of major roll eccentricity in multivariable cold-rolling processes. Fundamental problems in multivariable cold-rolling processes such as process time delay inherent in exit thickness measurement and non-stationary characteristics of roll eccentricity signals can be overcome by the proposed control method. The filtered instantaneous estimate of roll eccentricity may be exploited to improve instantaneous estimate of the exit thickness variation based on roll force and roll gap measurements, and a feedforward compensator is augmented as a reference for a gaugemeter thickness estimator. LQ feedback controller is combined with eccentricity filter for the attenuation of the exit thickness variation due to the entry thickness variation. The simulation results show that the roll eccentricity disturbance is significantly eliminated and other disturbances also are attenuated.

• BMB Reports
• /
• 제35권5호
• /
• pp.459-464
• /
• 2002

Fusogenic liposomes that incorporate Sendai virus envelope proteins, so-called Sendai virosomes, have been developed for in vitro and in vivo genetic modification of animal cells. In this study, several different virosomes of varying lipid compositions were formulated and their in vitro gene-transfer efficiencies compared. The virosomes were prepared by quantitative reconstitution of the Sendai envelope, fusion (F) and hemagglutinin-neuraminidase (HN) proteins into liposomal vesicles. Virosomes that contained luciferase reporter genes were tested in 293 transformed human kidney cells. F/HN-virosomes that were prepared with an artificial Sendai viral envelope (ASVE-virosomes) or phosphatidylserine (PS-virosomes) exhibited an 8- or 6-fold higher gene-transfer efficiency than cationic liposomes that were made with 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP). F/HN-virosomes that were prepared with phosphatidic acid (PA-virosomes) instead of PS were less efficient in gene transfer than either ASVE- or PS-virosomes. In addition, the genetransfer capability of ASVE- and PS-virosomes was maximal at a $Ca^{2+}$ concentration of 510 mM. These results suggest that the incorporated lipid components significantly affect the in vitro gene transfer that is mediated by Sendai F/HN-virosomes.

• 대한수의학회지
• /
• 제34권3호
• /
• pp.501-510
• /
• 1994

This paper deals with the distribution, reservoir and mode of spread of infection on 6 hatcheries in Taegu, Kyungpook and 5 broiler farms in Kyungpook during the period from June 1991 to June 1992. Isolated Salmonella were examined for serotypes, biotyping of Salmonella(S) typhimurtum, antibiotic susceptibility and some biochemical characteristics. Forty two Salmonella strains were isolated from 42(2.7% of 1,577 caecal samples of chicks, and their serotypes were S typhimurium 10, S typhimurium var Copenhagen 5, S infantis 4, S thompson 3, and untypable 20. The isolation rate of Salmonella varied from 0 to 5.1% in 6 hatcheries and that of Salmonella from 5 broiler farms was 10. 5%. Biotypes of 10 S typhimurium and 5 S typhimurium var Copenhagen strains isolated from chicks of hatcheries and broiler farms were biotype 2(86.6%), 8(6.7%), and 10a(6.7%), and 26i(6.7%) according to Duguid's scheme. Antibiotic susceptibility test of Salmonella isolated were performed by agar dilution method, using 9 antibiotics as follows: ampicillin(Am), chloramphenicol(Cm), gentamicin(Gm), kanamycin(Km), nalidixic acid(Na), rifampicin(Rf), streptomycin(Sm), sulfadimethoxine(Su), and tetracycline(Tc), All the strains were sensitive to RF. But 8 strans(23.8%) were resistant to one or more drugs and the most common resistance patterns of transferred R plasmids were SmSuGm and SmSu. Among 42 isolates, one had transferable citrate utilizing plasmid. S typhimurium and S typhimurium var copenhagen strains were resistant to killing by 90% normal guinea pig serum.

• 대한소아치과학회지
• /
• 제21권2호
• /
• pp.510-517
• /
• 1994

It is a relatively common clinical experience to see a impacted maxillary central incisor. This is apparent at the dental age of about eight years and over, when the patient is in the early mixed dentition stage. The adjacent teeth may tilt toward the site of the missing tooth with resulting space closure and midline deviation. Most often, the central incisor is impacted labially. The labial impaction has been indicated as the most difficult to manage. Each of the current articles describing labial impactions shows at least one case with mucogingival recession or a minimal zone of attached gingiva. This report described the surgical uncovering and orthodontic-physiologic positioning methods with labially impacted maxillary central incisors. Through surgical exposure and direct bonding of lingual botton, the central incisors were brought into proper eruption path with elastic traction. The case 1 and 2 were treated with the physiologic erupting forces. The case 3 was applied with continuous orthodontic force. The case 1 and 2 resulted in good positioning, good esthetics and adequate width of keratinised gingiva. The case 3 resulted in local inflammation and inadequate width of keratinised gingiva.

• 열처리공학회지
• /
• 제15권3호
• /
• pp.118-126
• /
• 2002

TiCN thin films were deposited on tool steels at $510^{\circ}C$ by PECVD from a $TiCl_4+N_2+CH_4+H_2+Ar$ gaseous mixture. The microstructures and preferred orientation were investigated. The micro-scratch tests were performed using a system equipped with an acoustic emission sensor. Critical loads were determined to evaluate the adhesion of TiCN to substrate. The influences of the microstructures of substrates, double layered coatings, and coatings after nitriding(duplex coating) were investigated. The experimental results showed that the microstructures of substrates and double layered coating did not affect the critical loads considerably. By the duplex coating, critical loads were not always increased. In some cases, duplex coatings decreased critical loads significantly despite of absence of black layer. In this study, we tried to relate the results of scratch test to the residual stress analysis. Nitriding before the coating reduces the tensile residual stress in the film, which gives rise to low critical load in scratch test.

• 대한환경공학회지
• /
• 제22권3호
• /
• pp.505-510
• /
• 2000

본 연구는 부영양화시 다량 발생하고, 독소생성의 주원인 종으로 알려진 Microcystis aeruginosa의 정수처리 중 응집공정에서 전염소처리의 영향을 조사하였다. Microcystis aeruginosa를 실험실에서 배양하여, $10^5cell/mL$가 되도록 인공시료를 만들었다. 전염소처리의 염소주입량은 각각 0.2, 1.0, 10 mg-Cl/L으로 하였고, 반응시간은 1시간과 1분으로 하였다. 응집 후 모든 시료의 탁도는 응집제를 0.4 mg-Al/L 주입한 후 매우 낮게 나타났으므로 탁도 유발물질은 염소주입량에 의한 영향이 매우 낮은 것으로 나타났다. 염소량이 증가함에 따라 응집 후 잔류알루미늄은 감소하였고, $UV_{254}$는 증가하였다. 적당한 염소농도(1.0 mg-Cl/L)에서는 반응시간이 길어짐에 따라 $UV_{254}$가 증가하였다.

• 한국미생물·생명공학회지
• /
• 제20권5호
• /
• pp.505-510
• /
• 1992

고온성 혐기성 세균인 Clostridium thermocellum의 섬유소 분해 효소 유전자를 pUC9 플라스미드를 이용하여 대장균에 클로닝하였고, 지금까지 클로닝 된 C.thermocellum의 섬유소 분해 유전자들과 제한효소 양상을 비교하여 새로운 유전자임을 알 수 있었다. 대장균에서 섬유소 분해 효소를 열처리와 column chromatography에 의해서 정제를 하였고, 분자량은 40, 000이었다. 이 효소는 pH 5.0과 $65^{\circ}C$에서 CMC에 대해서 최대 활성을 보였고 최종 산물인 포도당과 cellobiose에 의한 활성의 저해는 크게 나타나지 않았다. CMC에 대한 이 효소의 $K_{m}$ 과 $V_{max}$값은 각각 0.39(w/v)와 268 U/mg protein이었다.