• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.308-314
• /
• 2017

$Fe_3O_4$/Fe/graphene nanocomposite powder is synthesized by electrical wire explosion of Fe wire and dispersed graphene in deionized water at room temperature. The structural and electrochemical characteristics of the powder are characterized by the field-emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, field-emission transmission electron microscopy, cyclic voltammetry, and galvanometric discharge-charge method. For comparison, $Fe_3O_4$/Fe nanocomposites are fabricated under the same conditions. The $Fe_3O_4$/Fe nanocomposite particles, around 15-30 nm in size, are highly encapsulated in a graphene matrix. The $Fe_3O_4$/Fe/graphene nanocomposite powder exhibits a high initial charge specific capacity of 878 mA/g and a high capacity retention of 91% (798 mA/g) after 50 cycles. The good electrochemical performance of the $Fe_3O_4$/Fe/graphene nanocomposite powder is clearly established by comparison of the results with those obtained for $Fe_3O_4$/Fe nanocomposite powder and is attributed to alleviation of volume change, good distribution of electrode active materials, and improved electrical conductivity upon the addition of graphene.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.416-421
• /
• 2013

The purpose of this study was to investigate the effects of pH, temperature, light, sugars, and organic acids on the stability of anthocyanin pigments extracted from aronia (Aroniamelanocarpa). Pigments from aronia were most stable at pH 3.0, with maximal absorbance at 514 nm. High temperatures and prolonged heating substantially reduced anthocyanin contents. Anthocyanin levels were as low as approximately 21.70 and 79.63% of normal levels after 300 min of heating at 30 and $100^{\circ}C$, respectively. All of the sugars tested decreased the abundance of aronia pigments, with the levels highest in the presence of maltose, and decreasing progressively in the presence of galactose, sucrose, glucose, and fructose. Among the organic acids tested, citric acid was the most effective in stabilizing the aronia pigment, followed by tartaric acid, malic acid, formic acid, and ascorbic acid. These results provide useful reference data for efforts to use pigments from aronia in processed foods or for developing natural food colorants.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.8-14
• /
• 2006

The pigment extraction of Opuntia ficus-indica has been conducted to develop useful natural dyes in place of synthetic dyes which are suspected to bring serious environmental pollutions. The dyeing ability on wool fabric by addition of ascorbic acid and several mordants were investigated by means of color measurement. In addition, the fastness of washing, perspiration, rubbing, light, dry cleaning, effect on bacterial reduction and UV-B protection were also investigated. From these investigation, it is suggested that the pigment extracted from Opuntia ficus-indica can be used as a source of natural dyes and the obtained result are as follows. 1. Maximum absorption band (${\lambda}max$) of Opuntia ficus-indica extract is 533nm. 2. The wool fabric dyed with Opuntia ficus-indica extract has stable color by the addition of ascorbic acid and is achieved with addition of 0.1% ascorbic acid, 0.5% several mordant, and three repeated dying at $50^{\circ}C$ for 1.5hr. 3. The wash fastness of the dyed wool fabric when it is washed with neutral detergent is more effective than alkaline detergent. The dry cleaning fastness of the dyed wool fabric is more excellent. In addition, the perspiration fastness of the dyed wool fabric is increased by mordanting method. And than the rubbing fastness of the dyed wool fabric is showed excellent under dryness and wetness. Light fastness of the dyed wool fabric, however is showed inferiority. 4. The wool fabric dyed with Opuntia ficus-indica extract is showed effective bacterial reduction and UV-B protection is increased remarkably.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.

• Journal of the Korean Magnetics Society
• /
• v.24 no.5
• /
• pp.135-139
• /
• 2014

Iron-oxide nanopowders were synthesized by a pulsed wire evaporation (PWE) in various ambient gas conditions. SEM measurement indicates that the spherical iron nanoparticles are about 50 nm in diameter. The phase analysis for the produced iron-oxide powders was systematically investigated by using $M\ddot{o}ssbauer$ spectra and the results show that classified phases of $Fe_2O_3$ and $Fe_3O_4$ can be controlled by regulating the oxygen concentration in the mixed gas during the PWE process. A quadrupole line on the center of $M\ddot{o}ssbauer$ spectrum represents the superparamagnetic phase of 12 % from ${\gamma}-Fe_2O_3$ phase.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.5
• /
• pp.357-363
• /
• 2003

The aim of this work is the synthesis of a-C:H films from methane gas using surface spark discharge at the atmospheric pressure. Properties of these films have been investigated as functions of energy W delivered per a methane molecule in the discharge. The method enables the coatings to be deposited with high growth rates (up to $100 \mu\textrm{m}$/hour) onto large-area substrates. It is shown that the films consist of spherical granules with diameter of 20∼50 nm formed in the spark channel and then deposited onto the substrate. The best film characteristics such as minimum hydrogen-to-carbon atoms ratio H/C=0.69, maximum hardness $H_{v}$ =3 ㎬, the most dense packing of the granules and highest scratch resistance has been obtained under the condition of highest energy W of 40 eV. The deposited a-C:H coatings were found to be more soft and hydrogenated compared to the diamond-like hydrogenated (a-C:H) films which obtained by traditional plasmaenhanced chemical vapor deposition methods at low pressure (＜10 Torr). Nevertheless, these coatings can be potentially used for scratch protection of soft plastic materials since they are of an order harder than plastics but still transparent (the absorption coefficient is about $10^4$∼$10^{5}$ $m^{-1}$ At the same time the proposed method for fast deposition of a-C:H films makes this process less expensive compared to the conventional techniques. This advantage can widen the application field of. these films substantially.y.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.3
• /
• pp.128-132
• /
• 2009

Transparent conducting thin films of indium tin oxide(ITO) co-sputtered with aluminum-doped zinc oxide(AZO) were deposited on glass substrate by dual magnetron sputtering. It was found that the electrical properties and structural characteristics of the films are significantly changed according to the sputtering power of the AZO target. The IAZTO film prepared with D.C power of ITO at 100 W and R.F power of AZO at 50 W shows an electrical resistivity of $4.6{\times}10^{-4}{\Omega}{\cdot}cm$ and a sheet resistance of $30{\Omega}/{\square}$ (for 150 nm thick). Besides of the improvement of the electrical properties, compared to the ITO films deposited at the same process conditions, the IAZTO films have very smooth surface, which is due to the amorphous nature of the films. However, the electrical conductivity of the IAZTO films was found to be deteriorated along with the crystallization in case of the high temperature deposition (above $310^{\circ}C$). In this work, high quality amorphous transparent conductive oxide layers could be obtained by mixing AZO with ITO, indicating possible use of IAZTO films as the transparent electrodes in OLED and flexible display devices.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.732-737
• /
• 1990

In this study, the rutin contents in buckwheat and buckwheat foods were determined. Rutin in buckwheat and buckwheat foods was extracted with methanol and separated by High Performance Liquid Chromatography(HPLC) equipped with Lambda-Max Model 481 detector set at 355 nm using a ${\mu}$ Bondapak $C_{18}$ column and a 2.5% acetic acid:methanol:acetonitrile (35:5:10, v:v:v) solvent. There were differences in the rutin contents among the different species of buckwheat. The rutin contents in buckwheat groats were ranged from 8.84 mg to 24.77 mg/100g. The rutin contents in commercial buckwheat groats and flours were ranged from 15.04 mg to 20.92 mg/100g. The rutin contents in commercial dried buckwheat noodles, steamed buckwheat noodles, and buckwheat cookies were ranged from 1.76 mg to 10.84 mg/100g.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.16-20
• /
• 2002

Bi-axially textured Ni tapes for YBCO coated conductors were Prepared by cold rolling and heat treatment of Ni Powder compacts. The Ni powder used in this study was 5 urn in particle size and 99.99 % in purity. The process of this study consists of filling of hi powder into a rubber mold, cold-isostatically Pressing and sintering of the powder compacts at 110$0^{\circ}C$ for 6h in 96 % Ar - 4 % H$_2$ atmosphere. The sintered compacts were cold rolled with a 5 % step reduction ratio into a 100 micron-thick tapes and then heat-treated at 100$0^{\circ}C$ for various time periods. The (200) texture of Ni tape was successfully developed through the recrystallization heat treatment of the cold rolled Ni tapes. At 100$0^{\circ}C$, the degree of texture of the heat-treated Ni tapes seems not to be significantly affected by the heat-treatment time. The short heat treatment of S min was sufficient to develop the complete (200) cube texture. The degree of in-Plane and out-of-plane texture of the prepared Ni tapes was 8-10$^{\circ}$. The heat treated Ni tapes consisted of equiaxed grains with a size 50-70 microns. and the AFM sol-face roughness was as smooth as 3 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.57-58
• /
• 2000

we have grown vertically aligned carbon nanotubes on a large area of Co-Ni codeposited Si substrates by thermal chemical vapor deposition using $C_2H_2$ gas. The carbon nanotubes grown by the thermal chemical vapor deposition are multi-wall structure, and the wall suface of nanotubes is covered with defective carbons or carbonaceous particles. The carbon nanotubes range from 50 to 120 nm in diameter and about 130 ${\mu}m$ in length at $950\;^{\circ}C$. Steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically. The turn-on voltage was about 0.8 $V/{\mu}m$ with a current density of 0.1 ${\mu}A/cm^2$ and emission current reveals the Fowler-Nordheim mode.