• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.139-142
• /
• 2002

본 논문에서는 기존의 MSA의 구조를 변형하여 용량을 장하한 변형된 MSA구조와 S자형 변형된 MSA 구조를 제안했다. 용량을 장하한 변형된 MSA는 전기력선 형성에 제한 받지 않도록 방사패치와 접지면을 접어 올린 좌ㆍ우측 평행 평판과 방사패치 사이 용량을 장하하고, S자형 변형된 MSA는 방사패치쪽과 그라운드판쪽에 용량을 장하하여 설계ㆍ제작하였다. 설계된 안테나는 2.24GHz의 중심 주파수에서 S자형 변형된 MSA가 5.7%의 대역폭을 갖고, 용량을 장하한 변형된 MSA가 8.71%의 대역폭으로 용량을 장하한 변형된 MSA가 광대역 안테나임을 확인하였다. 또한 제작된 S자형 변형된 MSA의 방사 패턴 특성은 E면과 H면의 수직ㆍ수평 편파의 특성을 측정하여 비교하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.98-104
• /
• 2006

In this parer, proposed a Miniature inverted F Antenna for Bluetooth applications using folded structure and confirm it through producing and measurement. The proposed antenna as PIFA is optimized the impedance matching and the radiation pattern by positioning of feed line and short line. This antenna is designed with Microwave Studio presented CST and the optimized antenna structure is fabricated. The optimized miniature antenna size is 17.3 * 6 * 0.8 mm, the measured return loss bandwidth is 220MHz at 2.45GHz, the radiation pattern is quasi omni, and the gain is -1 dBi. these results are similar to the simulation data. It is comparatively appropriate for Bluetooth system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.525-533
• /
• 1997

A nondestructive moisture measurement technique has been applied to improve the previous moisture measurement method in the building research. The experiment was done in free space using horns since it is the key element for continuous and non-destructive measurement. For this purpose a microwave bridge type analyzer at the frequency of 9.5 GHz was used to determine the moisture content of sands in the range of 1~12%. From this, the representative calibration curves were obtained. This shows that moisture measurement technique using microwave is applicabe to the measurement of moisture in non-metallic materials such as coal, pulp, foods, building materials, etc.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.131.2-131.2
• /
• 2012

태양전파폭발위치감지기(KSRBL)는 단일 안테나 전파분광기로써 미 뉴저지공과대학과의 협력으로 2009년 8월에 한국천문연구원에 개발 설치되었다. 1 MHz 스펙트럼 분해능과 1초의 시간 분해능을 가지고 있고 관측할 수 있는 주파수 대역은 245, 410 MHz 와 0.5-18 GHz에 이르는 광대역이다. 또한 태양 전면 태양 폭발 위치를 감지할 수 있다. 전파 관측은 LabVIEW와 IDL 프로그램에 의해 미리 짜여진 관측 스케줄에 따라 매일 자동으로 진행된다. 데이터 분석을 위해 필요한 플럭스, 안테나, 전파 이득에 대한 눈금조정 작업을 위한 소프트웨어를 개발하였다. 2009년 설치이후 지금까지 12개의 이벤트를 관측하였고 그 중 5개의 이벤트를 가지고 관측된 스펙트럼의 모듈레이션 패턴을 분석하여 태양면상에서 전파 폭발의 위치 값을 구했다. Solar Dynamics Observatory(SDO) AIA 이미지와 비교해 KSRBL의 위치감지 성능을 분석하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.768-772
• /
• 2007

Integration of RF front end module(FEM) into the antenna has been investigated in USPCS band (1.88GHz-1.99GHz). The FEM consists of input filter, power amplifier, coupler, power detector, bias switch and duplexer. The antenna was designed in planar inverted F antenna(PIFA) structure to implement it inside the handset. In order to avoid strong coupling between the antenna and FEM, a shielding ground layer was placed between them. The antenna size is 19mm by 10mm by 6mm under which FEM whose size is 8mm by 5mm by 1.5m locates. The antenna impedance was selected to match to FEM having better efficiency rather than gain since FEM has enough gain whose system spec is minimum of 20dB. The antenna patterns are shown with and without FEM.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.419-427
• /
• 2000

The 4 by 4 microstrip phased array antenna designed and radiation characteristics are studied. The design frequency was chosen to be 5.8GHz. Chebyshev ratio was achieved by unequal power divider and Wilkinson power divider. The ratio of current at each port is 1 : 2.6 : 2.6 : 1 and then side lobe level is less than -30 dB. It is shown that the radiation beam direction can be changed up to 30。 by control the phase at each port. The result can be used to design electrically controllable microwave scanning antennas.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.8-13
• /
• 1997

In this paper, the input impedance and efficiency of rectangulr microstip patch antenna located inside a rectangular wavegudie is calculated by using the cavity model and the mode excited by te patch antenna which is modeled as an equivanlent surface magnetic current on the conducting plate. Measured return losses of a rectangular microstrip patch antenna tuned at 5.93 GHz in the free space and inside the retangular waveguide are compared and found to be in good agreement with calculated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.823-830
• /
• 2010

This paper deals with a coaxial-to-waveguide transition generating circularly polarized wave to be connected with horn antennas. By combining vertical coaxial fed structure, back-short and the polarization twisting structure, the circular polarization is successfully generated in the waveguide. The designed and implemented transition shows that the present structure can significantly reduce the size of the antenna part at X-band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.239-244
• /
• 2004

In this paper, we have developed a frequency mixer which can be used as a microwave phase conjugator in the LS band retrodirective antenna system. The mixer as a phase conjugator must have an If signal of which frequency is nearly as high as that of an RF signal, so this fact brings difficulty in the combination of input signals and the design of impedance matching circuit. The circuit configuration is chosen to be of the gate mixer using a pseudomorphic HEMT device. The operating frequencies are 4.00 ㎓, 2.01 ㎓, and 1.99 ㎓ for LO, RF, and IF, respectively. Conversion gain is measured to be 12.5 ㏈ and 1 ㏈ compression point -34 ㏈m at the LO power of -7 ㏈m. The mixer fabricated in this research is the single-ended type, where RF leakage signal appears inevitably at the If port because RF and If frequencies are almost the same. The circuit topology suggested here can be applied directly to the design of balanced-type mixers and phase conjugators.