• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.365-373
• /
• 2015

In this paper, a planar antenna with monopole-like radiation pattern for on-body communications is proposed. The proposed antenna consists of three split-rings(SR) to generate a monopole-like radiation characteristic. To account for the on-body application, the proposed antenna is designed to have a low-profile. The antenna has an overall dimensions of $0.29{\lambda}_0{\times}0.29{\lambda}_0{\times}0.008{\lambda}_0$ at 5.8 GHz industrial, scientific, and medical(ISM) band(5.725~5.875 GHz). To verify the body effect, a two-thirds muscle equivalent semi solid phantom is fabricated and used to measure the antenna performance. The 10-dB return loss bandwidth is 280 MHz(5.68~5.96 GHz) and the measured peak gain is 1.91 dBi.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.289-294
• /
• 2008

A 77 GHz 3-stage low noise amplifier (LNA) employing one common source and two cascode stages is developed using $0.13{\mu}m$ CMOS process. To compensate for the low gain which is caused by lossy silicon substrate and parasitic element of CMOS transistor, positive feedback technique using parasitic inductance of bypass capacitor is adopted to cascode stages. The developed LNA shows gain of 7.2 dB, Sl1 of -16.5 dB and S22 of -19.8 dB at 77 GHz. The return loss bandwidth of LNA is 71.6 to 80.9 GHz (12%). The die size is as small as $0.7mm\times0.8mm$ by using bias line as inter-stage matching networks. This LNA shows possibility of 77 GHz automotive RADAR system using $0.13{\mu}m$ CMOS process, which has advantage in cost compared to sub-100 nm CMOS process.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.628-635
• /
• 1999

At center frequency of 11.85 GHz, wideband left-handed circularly polarized microstrip array antenna is designed with the method of sequential ratation based on $2\times2$ radiation elements($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ phase delay). Its return loss, axial ratio bandwidth, radration pattern, and gain are compared with those adopting sequential rotation based on $1\times2$ radiation elements($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$phase delay). The $8\times8$ array is manufactured and measured. The results show that 10 dB return loss bandwidth is 10.51~12.74GHz(18.82%) which is 1.57 times wider than the case using $1\times2$ sequential rotation method, 3 dB axial ratio bandwidth is 11.43~12.5 GHz(9.03%) which is 1.25 times as wide as that using $1\times2$ sequential rotation method and the antennal gain is 25.4 dB. The results of mesurements are almost similar to those of simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.103-107
• /
• 2009

In this paper, we designed and implemented a dual band chip antenna for WLAN, which contains within the small LAN card contrary to the enternal AP(Access Point) antenna. Limiting about the antenna size, we used dielectrics of high permittivity. Totally considering problems of demand-supply, price and characteristics, we used that relative dielectrics of ceramic is 9.8 and the thickness is 3.5mm and 5mm. Ceramic antenna can be used not only triple mode of IEEE 802.11.a,g and b but also broadband. The frequency bands have wideband characteristics of 2.4~2.5GHz and 4.9~5.85GHz and relatively constant performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.807-811
• /
• 2001

In this paper we proposed a dual-frequency circular sector microstrip antenna with orthogonal polarized modes and high isolation between the two feeding ports. And then we designed a transceiver operating at 5.6 GHz for transmitting and at 5.5 GHz for receiving. The good isolation provided by the proposed antenna is used as the basis for the transmit-receive filtering of transceiver. The operating frequencies and polarization characteristics of the proposed antenna is calculated by using a cavity model. The 5-parameters and radiation patterns of the antenna are measured. A power amplifier and a low noise amplifier are designed and integrated with antenna to make a transceiver, which has about 13dB transmitting gain and about 8㏈ receiving gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.788-793
• /
• 2004

This paper proposes new configuration for the dual power amplifier that operates at 5.8 GHz for the wireless LAN and 1.8 GHz for the PCS. It dose not select the input signal but amplify the dual band signals simultaneously. Broadband diplexer is used at the input to separate the dual band signals. Output power of each amplifier is 1 W. The PBG is employed to improve the performance of power amplifier. Generally, the PBG is employed at the end of output matching network. But in this paper, the PBG is employed in the load pull output matching circuit of amplifer to maximize the output power.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.22-26
• /
• 2016

In this paper, we measured the efficiency of the receiver for 5.8GHz Microwave Smartphone Charging. We have designed and fabricated 1W and 2W power amplifier, respectively. A 1W power amplifier used a TC3531 power device of TRANSCOM Inc. In addition, a 2W power amplifier using the two TC3531 devices was constructed with divider and combiner. We used the Wilkinson divider theory for divider and combiner. The voltage was measured using the 1W and 2W power amplifier and integrated receivers to the distance of 50cm.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.88-91
• /
• 2015

In this paper, we have designed and fabricated a BPF (Band Pass Filter) for 5.8GHz Microwave Wireless Power Transmission. We $used{\lambda}g/2$ open-circuited stubs in addition to T-shaped transmission lines for the BPF. This BPF removes harmonics caused by diodes of RF-DC converter, and thus the RF-DC converter converts more RF power to the DC. The performance of the BPF was measured and shown through direct comparison of voltages converted by the doubler as a RF-DC Converter with and without the BPF.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.84-87
• /
• 2015

We have designed and fabricated two different RF-DC Converters called doubler for 5.8GHz Microwave Wireless Power Transmission. The doubler as RF-DC Converter makes the rectified voltage be doubled. We measured and compared voltages of the doublers with those of the previous full-wave rectifying RF-DC Converter. The doublers show rectified double voltages. However, the full-wave rectifying converter has a high efficiency due to the suppression of reflecting harmonics. The other fabricated doublers causes so many harmonics that they can't convert the low-power RF to the full DC. In this paper, we show that the different doublers doesn't double the rectifying voltages compared with those of the full-wave rectifying converter and give a reason about that.