• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.108-115
• /
• 2017

We report the assembly procedure and performance evaluation of a visible and near-infrared spectrometer in the wavelength region of 400-900 nm, which is later to be combined with fore-optics (a telescope) to form a f/2.5 imaging spectrometer with a field of view of ${\pm}7.68^{\circ}$. The detector at the final image plane is a $640{\times}480$ charge-coupled device with a $24{\mu}m$ pixel size. The spectrometer is in an Offner relay configuration consisting of two concentric, spherical mirrors, the secondary of which is replaced by a convex grating mirror. A double-pass test method with an interferometer is often applied in the assembly process of precision optics, but was excluded from our study due to a large residual wavefront error (WFE) in optical design of 210 nm ($0.35{\lambda}$ at 600 nm) root-mean-square (RMS). This results in a single-path test method with a Shack-Hartmann sensor. The final assembly was tested to have a RMS WFE increase of less than 90 nm over the entire field of view, a keystone of 0.08 pixels, a smile of 1.13 pixels and a spectral resolution of 4.32 nm. During the procedure, we confirmed the validity of using a Shack-Hartmann wavefront sensor to monitor alignment in the assembly of an Offner-like spectrometer.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.39-46
• /
• 1965

The author studied on the bionomics of Oriental moth. Cnidocampa flavescens WALKER, damaging to the persimmon tree n the southern part of Korea from 1964 to 1965. The results can be summarized as follows; 1. Emergence peak period of Oriental moth was mid-June in Taegu district and eggs are deposited on the opposite side of persimmon tree leaf. Specially most of eggs are deposited on the terminal part of opposite side and peak period s also mid-June. 2. Hatched Percentage of eggs was $84.4\%$ in 1964 while $96.1\%$ in 1965 at the rearing room. Mean egg Period was $5.984\pm0.162$ in 1964 while $6.262\pm0.094$ days in 1965. Thus during two years, the egg period was about 6 days. 3. In the growth ratio of Oriental moth fed on various host plants persimmon tree, Acer negund, Hazel-wood and Platanus, the best growth ratio was shown on the leaf of Hazel-wood from 1st till 3rd instar, but, on the contrary, persimmon tree was the best from 4th till the last instar. The growth ratio of head width was also the same tendency as the body length above mentioned. Individuals fed on the leaf of platanus were dead after 20 days. 4. Oriental moth has one generation a year and molts 6 times. The first molting occurred in 5 hours after hatched, and the other moltings were done at f days intervals. After 3 days since the last molting, larvae made the non for over-winter in it. 5. As the bristles on the process of larval body are different from each position and instar, judgement of instars are possible by the counting of bristles on the body according to the Table 8. Specially the bristle of L. 2., D. 2, 3 ,8. 10. and L. 1, 3, 4, 5, 6, 7, are perfectly different from each instar. From these bristles, instars can be recognized easily. 6. Pupation of larvae in the over-wintered cocoon on the stem of persimmon tree was done in mid-May and continued will early June when emergence will take place. 7. Mean number of eggs in the ovary was $1325.5\pm2.7182$

• The Korean Journal of Air & Space Law and Policy
• /
• v.4
• /
• pp.65-85
• /
• 1992

The air waybill is supposed to be made out by the consignor. If the carrier makes it out, he is deemed, subject to proof to the contrary, to have done so on behalf of the consignor. The air waybill shall be made out in three original parts. The first part shall be marked "for the carrier", and shall be signed by the consignor. The second part shall be marked "for the consignee", it shall be signed by the consignor and by the carrier and shall accompany the goods. The third part shall be signed by the carrier and handed by him to the consignor, after the goods have been accepted. According to the original Warsow Convention article 8, the air waybill must contain 17 particulars or items. However, the Hague Protocol reduced to three the number of particulars required to appear on the air waybill. Only one item is obligatory, namely, the notice that the carriage is subject to the rules of the Warsaw Convention. The absence of the air waybill entails unlimited liability of the carrier because it deprives him of the right to avail himself of the provisions of the Warsaw Convention which exclude or limit his liability. The consignor shall be liable for all damages suffered by the carrier or any other person by reason of the irregularity, incorrectness or incompleteness of the particulars and statements in the air waybill. Although the contract of the carriage of goods by air is not a formal contract, the document of carriage is issued. The issue of air wayhill is not essential for the existence or validity of the contract, but serves merely as a means of proof. The Hague Protocol has lessened the consequences of the carrier's neglect to faithfully accomplish the required formalities. Henceforth, these formalities no longer constitute legal obligations. The air waybill is the consignment note used for the carriage of goods by air. It is often called an air consignment note and is not a document of title or transferable/negotiable instrument. It is basically a receipt for the goods for despatch and is prima facie evidence of the conditions of carriage. Each of the original parts of the air waybill has evidential value and possession of his part is a condition for the exercise by the consignor or cosignee of his rights under the contract of carriage. Oveall, it is an usage that under a documentary letter of credit, the consignee on the air waybill is the opening bank of the letter of credit, and the notify party is the importer who applied for the letter of credit. In Korea there is an usage as to process of cargo delivery in air transportation as follows: The carrier carries the cargo into the bonded area of the airport and gives both the notice of arrival of the cargo and the consignee's air waybill to the notify party who is the importer. Then the notify party obtains the Letter of Guarantee from the opening bank in exchange for reimbursing the amount of the letter of credit or tendering the security therefor to the opening bank. The notify party then presents this document to the customs authorities for the process of customs clearance. The opening bank becomes a consignee only to ensure repayment of the funds it has expended, and the only interest of the opening bank as consignee is the reimbursement of the money paid to the exporter under the documentary letter of credit. Just as the bill of lading in maritime law, the air waybill has always been considered negotiable although the Warsaw Convention does not emphasize this aspect of negotiability. However, the Hague Protocol article 4 corrected the situation by stating that "nothing in this Convention prevents the issue of a negotiable air waybill." This provision officially recognizes that the air waybill must meet the needs of the present day business circles by being a negotiable instrument. Meanwhile, Montreal Additional Protocol no. 4 has brought important changes. Registration by computer is acceptable and the parties to the contract of carriage are allowed to replace the air waybill with a receipt for the goods. In conclusion, as the Warsaw Convention has not details of provisions relating to the issuing of the negotiable air waybill, it is hoped that there should be supplement to the Warsaw Convention and establishment of international commercial usage with regard to the negotiable air waybill.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.307-314
• /
• 2010

This study aimed to measure such features of emotional responses perceived by students as learning climate, department living stress, and perceived helplessness to analyze their effects on major satisfaction among students at the department of dental hygiene; to do this, a survey was conducted with 431 students, regardless of college year, who were at the department of dental hygiene in four colleges in Gyeonggi Province, Daejeon, and Chungcheong Province. An existing emotion scale which went through the generalization process was used to draw a multiple model in the combination form in order to collect emotional factors affecting college students' satisfaction with their major, which had existed as a hypothetical proposition, and make overall interpretation of relevance through the explainable, predictable modeling process by measuring emotional factors and phenomenal description of the level of general perception. The results showed that major satisfaction was very significantly affected by emotional features among students at the department of dental hygiene, which needs to be treated as an important factor to enhance expertise related to major learning and improve students' living.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• Applied Biological Chemistry
• /
• v.13 no.2
• /
• pp.171-180
• /
• 1970

The yeasts in the soy sauce mash were isolated and identified, and they were classified by coloring with the treatment of TTC(2, 3, 5, triphenyltetrazolium chloride) agar and counted in process of time. The results obtained were as follows: a) The number of ordinary and osmophilic yeasts in 1 ml. of the soy sauce mash showed a tendency to be increased from the mashing to the mature stages and to decrease in the aging stages: $127{\times}10^3$ immediately after mashing, $83{\times}10^3$ 1 month after, $356{\times}10^3$ 3 months after, $1250{\times}10^3$ 6 months after and $65{\times}10^3$ 2 years after mashing in the case of ordinary yeasts, and 0 after mashing, $40{\times}10^3$ 1 month after, $81{\times}10^3$ 3 months after, $358{\times}10^3$ 6 month after and $23{\times}10^3$ 2 years after mashing in the case of osmophilic yeasts. b) 50 strains of yeasts were isolated from the soy sauce mash optionally in process of fermentation period, and they were identified as 7 genera and 18 species: 10 strains of Saccharomyces rouxii, 1 strain of Saccharomyces marxianus, 3 strains of Saccharomyces rosei, 1 strain of Saccharomyces fermentati, 6 strains of Saccharomyces mellis, 1 strain of Saccharomyces acidifaciens, 1 strain of Saccharomyces pastori, 3 strains of Pichia polymorpha, 2 strains of Hansenula anomala, 1 strain of Hansenula saturnus, 2 strains of Hansenula suaveolens, 5 strains of Nadsonia fulvescens, 8 strains of Debaryomyces hasenii, 1 strain of Debaryomyces nicotianae, 1 strain of Debaryomyces kloeckeri, 2 strains of Torulopsis sake, 1 strain of Torulopsis holmii and 1 strain of Candida pelliculasa. c) Distribution of yeasts according to the fermentation period was as follows: i) Saccharomyces rouxii, Saccharomyces marxianus, Saccharoymces rosei, Pichia polymorpha, Debaryomyces hansenii, Torulopsis sake, Candida pelliculosa, Debaryomyces nicotianae, Nadsonia fulvescens, Hansenula suaveolens and Hansenula saturnus were found in the early stages of fermentation. ii) Saccharomyces rouxii, Saccharomyces rosei, Saccharomyces fermentati, Saccharomyces mellis, Saccharomyces pastori, Hansenula anomala, Saccharomyces acidifaciens and Debaryomyces hansenii appeared in the mature stages. iii) Saccharomyces rouxii, Saccharomyces mellis, Nadsonia fulvescenes, Dedaryomyces hansenii, Debaryomyces kloeckeri, Torulopsis sake and Torulopsis holmii were distributed in the aging stages. d) TTC white yeasts were found in abundance in the early stages of fermentation and TTC red yeasts appeared more than 50 per cent in the mature and aging stages. e) The yeasts belonging to Saccharomyces mellis and Saccharomyces pastori were classified as TTC red yeasts, Saccharomyces acidifaciens were reel pink, Hansenula saturnus Debaryomyces kloeckeri, and Torulopsis holmii were pink, Saccharomyces marxianus and Nadsonia fulvescens were white and the others were the same as the description in the previous report. Saccharomyces rouxii ware classified for the most part as TTC red yeasts, and while some of them were red pink. f) Species of yeasts in the soy sauce mash were similar to those in the soy sauce koji, but the latter were not osmophilic and in the former case, the osmophilic yeasts were increased in process of fermentation period.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.9-19
• /
• 2001

contrasting monsoon between 1993 and 1994 produced an interannual difference in hydrology. Theoretical water residence time (TWRT) in monsoon 1993 averaged 27 d, which was>3 months shorter compared to the TWRT in monsoon 1994. A dominant physical process influencing thermal stratification, water movement, and mixing regime was an interflow current in 1993. During summer 1993, river water plunged to mid-lake (location 27 km) and passed through the 10${\sim}$20m stratum of the reservoir, resulting in an isolation of epilimnetic lake water from advected river water. The interflow disrupted thermal stratification and produced a meta-hypolimnetic warming of >4$^{\circ}C$ downlake, thereby increased a mixing depth (>13 m). In contrast, during monsoon 1994 density currents were not observed and strong thermal stratification occurred in the entire reservoir, resulting in > 2 fold greater thermal resistance (8.2${\times}10^{5}$ erg)compared to 1993 (4.0${\times}10^{5}$ erg). This reservoir was identified as a typical warm monomictic reservoir which showed one mixis during early winter. The timing of overturn, however, differed between the two years as a result of distinct contrast in TWRT and thermal regime; overturn in 1993 occured about one month earlier relative to that in 1994. Hypolimnetic warming was predictable in this system; the variation in discharge accounted (Y = 4.35-0.06X+0.10X$^{2}$, p<0.0001)for 98% of the interannual variation in hypolimnetic temperature. Overall data suggest that thermal stability, the timing of fall overturn, and water residence time in this system are primarily regulated by the intensity of monsoon.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.249-254
• /
• 2003

분석에 이용된 격자망은 동곡, 고로, 미성, 병천, 효령 및 무성지점에 각각 12개, 30개, 45개, 76개, 46개 및 1265개의 조격자를 구성하였으며 하천의 수로방향 및 경사형태를 세분화하기 위하여 각 지점에 대하여 8개, 24개, 24개, 44개, 12개 및 64개의 세격자로 분할하였다. AGNPS를 이용한 첨두유량의 모의발생 결과치가 동곡, 고로, 미성, 병천, 효령 및 무성지점에서 측정값과 비교하여 각 호우사상별로 상대오차가 1.0~25.0%, 4.0~27.0%, 7.0~29.2%, 2.0~23.9%, 3.0~25.0% 및 3.6~21.0%의 차이를 나타내었다. 분석결과에서 AMCII조건에서는 관측치와 분석결과치가 유사하게 나타났으나 AMCI조건에 대해서는 상대적으로 작은 값을 보였으며 AMCIII조건에서는 다소 큰 값으로 분석되었다. SCS방법에서 제안하는 AMC조건별 CN값을 우리 실정에 적합하도록 수정 보완하기 위한 수정 유출곡선지수 $CN_{m}$ /I과 $CN_{m}$/III을 재구성하였으며, 여기에 적용되는 수정 유출 곡선지수식의 계수 a를 추정한 결과, 기왕에 발표된 연구결과와 거의 일치된 경향을 나타내었다. 제안된 수정 CN식을 이용하여 산정한 결과치와 관측치는 거의 유사하게 나타났다. AGNPS모델에 의한 유출량 산정에 있어 수문학적 토양피복형수(CN)의 결정을 위하여 선행강우량과 토양의 공극율 및 지형인자인 각 셀마다의 유역경사를 이용하여 관계식(CN =f($X_1$, $X_2$, $X_3$))을 유도하였으며, 분석 결과에서 CN이 선행강우량과 가장 밀접한 관계가 있음을 알 수 있었으며 유역경사, 토양의 공극율 순으로 나타났다..88mg/$\ell$~의 범위로 나타났다. 무태교 지점에서의 총인의 농도는 0.52mg/$\ell$~0.99mg/$\ell$~의 범위이었다. 신천에 금호강물을 혼합한 이후에도 부유물질, 생화학적산소요구량, 암모니아태 질소, 총인 등의 농도가 개선되지 않았다. 즉 금호강물의 혼합은 신천수질환경사업소에서 배출되는 방류수에 함유되어 있을 2차 오염물질의 희석이라는 이점외의 수질개선효과는 확인되지 않았다.l years and a new type of transfer crane has been developed. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results co