• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.380-384
• /
• 2013

In this paper, we have developed a low temperature process to make two type of paste by using $TiO_2$ nanoparticles(P25). The interconnections between substrate and $TiO_2$ films or link between particles of free-binder paste(FP1, FP2, FP3) is very poor. Therefore, the Titanium(IV) isopropoxide was added to the TP paste to improve the interconnection. Electron transport time (${\tau}_t$) and recombination time (${\tau}_r$) are analyzed by IMPS (intensity-modulated photocurrent spectroscopy) and IMVS(Intensity-modulated photovoltage spectroscopy). In the results, ${\tau}_t$ of TP paste based DSSCs (about $4.3{\times}10^{-3}$) is faster than other samples. ${\tau}_r$ is longer from $2.7{\times}10^{-2}$ s of FP2 to $3.0{\times}10^{-2}$ s of TP. A solar conversion efficiency (DSSCs) of TP is 3.54% for an incident solar energy of 100 mW $cm^{-2}$(meanwhile, 2.70% for DSSCs with FP2). The conversion efficiency is increased by 1.3 times.

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.537-542
• /
• 2004

To reveal the relationship between the changes in the growth and photo- synthesis induced by low dose radiation, red pepper (Capsicum annuum L.) plants were serially irradiated three times with gamma rays of 0.5, 1, 2, 3, and 4 Gy. The plant growth was monitored by the fresh weight, the stem length, and the leaf length & width. All the irradiation groups (0.5-4 Gy) were stimulated in growth at 1 day after the $1^{st}$ irradiation (DA1I), but rather inhibited at 3 days after the $3^{rd}$ irradiation (DA3I). The maximum photochemical efficiency (Fv/Fm), the photochemical quenching (qP), the non-:photochemical quenching (NPQ) and the apparent rate of the photosynthetic electron transport (ETR) were used to represent the changes in the photosynthesis by the serial irradiation. The irradiation groups except 0.5 Gy had higher Fv/Fm values at 3 DA3I than the control one. After the 3$^{rd}$ irradiation, the qP values appeared to be a little lower in the 1-4 Gy groups than in the control and 0.5 Gy ones. In contrast, the NPQ values were rather higher in the irradiation groups except 0.5 Gy. During the whole experimental period, the ETRs decreased in the control group but remained relatively constant in the 4-Gy one. In conclusion, the results obtained indicate that the stimulatory effect of ionizing radiation on the plant growth was determined by the incident dose of the single irradiation rather than by the cumulative one of the serial irradiation. They also demonstrate that the growth stimulation induced by a low dose radiation could not be positively correlated with an alteration in the photosynthesis. Additionally, we discuss in text that an ionizing radiation may partly protect the leaf senescence by delaying the development of the plants.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.5
• /
• pp.2303-2307
• /
• 2014

Background: Renal cancer is a serious public health problem which may be under reported and registered in our setup, since the Karachi cancer registry documented only 43 cases out of 4,268 incident cancer cases over 3 year duration. Therefore we aimed to determine the clinicopathologic characteristics of adult renal tumors in our setup. Materials and Methods: The study was conducted in histopathology department, Liaquat National Hospital and included total of 68 cases of adult renal tumors over 4 years. Detailed histopathologic characteristics of tumors were analyzed. Results: Mean age of patients was 56.4 (18-84) years. Renal cell carcinoma (RCC) was the most common cell type (78%) cases; followed by transitional/urothelial carcinoma (12.5%), leiomyosarcoma (4.7%), oncocytoma (1.6%), squamous cell carcinoma (1.6%) and high grade pleomorphic undifferentiated sarcoma (1.6%). Among 50 RCC cases; 62% were conventional/clear cell RCC (CCRCC) type followed by papillary RCC(PRCC), 24%; chromophobe RCC(CRCC), 6% and sarcomatoid RCC(SRCC), 8%. Mean tumor size for RCC was 7.2 cm. Most RCCs were intermediate to high grade (60% and 40% respectively). Capsular invasion, renal sinus invasion, adrenal gland involvement and renal vein invasion was seen in 40%, 18%, 2% and 10% of cases respectively. Conclusions: We found that RCC presents at an earlier age in our setup compared to Western populations. Tumor size was significantly larger and most of the tumors were of intermediate to high grade. This reflects late presentation of patients after disease progression which necessitates effective measures to be taken in primary care setup to diagnose this disease at an early stage.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.93-97
• /
• 1996

The effects of annealing after deposition on the magnetic and magneto-optical properties of MnSbPt thin films prepared by rf sputtering were investigated. The MnSbPt alloy thin films were annealed in a vacuum with $10^{-5}$ Torr and the air, respectively, as a function of temperature and time. The films annealed at $300^{\circ}C$ for 4 hours was found to have the highest value of the saturation magnetization. The films annealed in the air did not show any thermal degradations, which indicates their chemical stability for the magneto-optical recording process. It was revealed that the $Mn_{43}Sb_{46}Pt_{11}$ films annealed at $300^{\circ}C$ for 4hours in a vacuum with $10^{-5}$ Torr exhibit high Kerr rotation angle of $0.8^{\circ}$ for the incident wavelength of 550nm, which is ascribed to the increase of the volume ratio of Clb phase. However, similar to the PtMnSb alloy thin films, these films are still horizontally magnetized and have the coercive field less than 400 Oe.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2006

In this study, liquid crystal (LC) aligning properties for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method with electron beam system in accordance with the evaporation angles were investigated. Also, the control of pretilt angles homeotropic aligned LC on $SiO_x$ thin film as the function of the evaporation angles were studied. The uniform vertical LC alignment on the $SiO_x$ thin film surfaces with electron beam evaporation was achieved with all of the thin film angle conditions. It is considerated that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation. The values of the pretilt angles according to the evaporation angle were from about $0.7^{\circ}$ to about $3.4^{\circ}$. The highest pretilt angles of about $3.4^{\circ}$ in aligned NLC on the $SiO_x$ thin film surfaces by electron beam evaporation were measured under the condition of $45^{\circ}$. Also, good LC alignment states on the treated $SiO_x$ thin film layer by electron beam evaporation were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment on the $SiO_x$ thin film by electron beam evaporation can be achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.889-903
• /
• 2015

As the number of recent information security incident occurrence increases, more and more workload and liability pressure are given to info-security professionals, which results in decrease of morale level of working groups in the field. In order to solve this problem, Korean government is providing various action plans to improve the morale level of info-security professionals, and also requiring financial companies to submit its own action plan of increasing morale of info-security professionals to Financial Service Agency. For this study, based on the previous studies and relevant professionals' interviews, we selected 16 critical morale increase variables, and performed survey for empirical analysis. As a result, 3 features; role, system, and relationship were presented as the main factor of morale increasement of info-security professionals. This study also suggests a decision making method of utilizing the developed morale measurement model for individual organizations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1320-1326
• /
• 2011

National institutions on the importance of information security is being recognized, information security laws are being discussed in Congress 3.4 DDoS incident and Nonghyup hacking, etc. However, National Assembly Secretariat when the results of the Information Security Consulting has been assessed very low 61.2 points, evaluation of hardware and software in secure areas were vulnerable. This paper, the legislative support agencies National Assembly and National Assembly Secretariat on the network and computer systems, and managerial, technical and physical security elements are analyzed for the status. And network should have the legislative support agencies and system for the physical network separation, DDoS attack response, Virus attack response, hacking attacks response, and Cyber Emergency Response Team/Coordination Center for Cyber infringing design and research through the confidentiality, integrity, availability, access control, authentication and security analysis is based on the evaluation criteria. Through this study, the legislative support agencies to strengthen the security of data and security laws enacted to provide the basis for.

• Analytical Science and Technology
• /
• v.30 no.2
• /
• pp.75-81
• /
• 2017

5-methylthioninhydrin (5-MTN) is an amino acid sensitive reagent used for the development of latent fingermarks deposited on porous surfaces such as paper and wood. The present study demonstrates that the 5-MTN can be used as a latent footwear impression enhancement reagent, by reacting with trace multivalent metal ions, which are the main components of the latent footwear impression. 5-MTN and L-alanine complex (MTN-ALA) used for the latent footwear impression development was prepared, by mixing $4.5{\times}10^{-3}M$ 5-MTN (in methanol) and $4.5{\times}10^{-3}M$ L-alanine (in methanol) in 1:1 ratio, and keeping undisturbed at room temperature for 24 h. The latent footwear impressions were deposited on white and black non-porous surfaces (glass plate, polyethylene panel, polypropylene panel, acryl panel, polyvinyl chloride (PVC) panel, poly(methyl methacrylate) (PMMA) panel, acrylonitrile-butadiene-styrene (ABS) panel, tile), and a semi-porous surfaces (painted wood). The latent footwear impressions on these surfaces were treated with MTN-ALA complex by spraying. The fluorescence of footwear impressions (occurred due to the reaction between MTN-ALA and metal complexes) was observed under a 505 nm forensic light source and an orange barrier filter. The enhancement of latent footwear impression was achieved from black surfaces without any blurring. However, the fluorescence (enhancement) of footwear impression was not observed on the white PVC, PMMA, and ABS surfaces, because the incident light interfered and reflected on the surface. The sensitivity of MTN-ALA was superior to 2,2'-dipyridil, which is a representative non-fluorescing footwear impression enhancement reagent, and similar to 8-hydroxyquinoline, which is a representative fluorescing footwear impression enhancement reagent.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.32-39
• /
• 1999

In this paper, the characteristics of the ray tracing method (RTM) based on the cylindrical wave are discussed for the high frequency vibration analysis of two-dimensional structures. A ray tube describing the emanating cylindrical wave is used to derive the governing equation for incident reflected, and transmitted ray tubes which satisfies the condition at the coupled boundary. The suggested ray model is applied to panel array structures, and the predicted results for 2-panel, 3-panel, and 4-panel array structures are compared to those by Statistical energy analysis (SEA) and Wave intensity analysis(WIA). More enhanced prediction was obtained compared to the SEA, and similar prediction performance was observed to the WIA. Additionally, the RTM has a novel feature that it can estimate the spatially smoothed distribution of vibration energy and vibration intensity. It is expected that the present RTM can be used as one of the useful tools for the high frequency vibration analysis of two-dimensional coupled structures.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.15-21
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave m며el was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86kg/day/km^2$ at this sitε which was 14.42 times more than during normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling， was $4.1^{\sim}3.5$ m, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.