• Korean Journal of Organic Agriculture
• /
• v.9 no.1
• /
• pp.37-49
• /
• 2001

This experiment was carried out to investigate the effects of application levels of nightsoil sludge compost(NSC) in 3 and 4 cuttings per annum on the dry matter yields and nutritive value of orchardgrass(Dactylis glomerata L.). Annual nightsoil sludge compost(NSC) were applied at levels of 0, 10, 20, 40 and 80 ton $㏊^{respectively}$ . Relative yields of each cut to annual dry matter yield were 29.9%, 46.% and 23.2% for 1st cut, 2nd cut and 3rd cut in 3 cutting system, 23.7%, 29.3%, 34.0% and 13.0% for 1st cut, 2nd cut, 3rd cut and 4th cut in 4 cutting system, respectively. Significantly higher dry matter yield of orchardgrass obtained were 8.11 ton $㏊^{-1}$ at level of 40 ton ㏊$^{-1}$ $yr^{-1}$ in 3 cutting systems, ranges of 7.50~10.71 ton $㏊^{-1}$ at level of 10~80 ton ㏊$^{-1}$ $yr^{-1}$ in 4 cutting systems than those of non application level of NSC, respectively(p〈0.05). The mean efficiency of dry matter production to application of NSC(kg DM/ton NSC) were 46 and 102 kg in 3 and 4 cutting systems, respectively. Although th contents of crude protein(CP, %) of orchardgrass were significantly higher at the application levels of 10~80 ton $㏊^{-1}$ $yr^{-1}$ -1/ by NSC than those of the application levels at the 0 ton $㏊^{-1}$ $yr^{-1}$ in 3 and 4 cutting systems(p〈0.05), the contents of neutral detergent fiber(NDF, %) and acid detergent fiber(ADF, %) were lower in NSC plots than those at the non-application plots of NSC. The contents of total digestible nutrient(TDN, %) and relative feed value(RFV) of orchardgrass were significantly increased with increase the applicaton levels of NSC(p〈0.05).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.2
• /
• pp.102-109
• /
• 1990

This experiment was carried out to study the effect of pure mineral nitrogen fertilizing on dry matter yield of grassland and the advisable mineral nitrogen amounts in long duration under practical conditions at the "Federal Institute for Agriculture in the Alps" in Austria. The application rates were 0, 30, 60,90 and 120 kg N/ha/cut, the cutting regimes 3-, 4-, 5- and 6-cuts/year. In order to explain the nitrogen-profitability were determined that 1 kg pure mineral nitrogen have to produce 8 - 16 kg DM/kg N in dependence on cutting regimes and requiring of nitrogen efficiencies. The results were as follows: 1. With only PK-fertilizaing average dry matter yields from 4.0 to 7.6 tons per ha and year were obtained. 2. Within all applied cutting regimes 60 kg min. Nlhalgrowth have proved to be the most efficient application rate witn 13 - 24 kg DM/kg N in dependent of cutting regimes. Comapred with only PK-treatment the DM yields increased by 3.9 - 4.7 t/ ha nad year. 3. By the sigmaformed process of Input-Output curve the highest marginal yield (the "most efficient" Ndressing rate) per ha and year was calculated: 152 kg N at 3-cut regimes, 204 kg N at 4-cut regimes, 220 kg N at 5-cut regimes and 240 kg N/ha/year at 6-cut regimes. 4. With required efficiencies of 16 and 12 kg DM/kg N 240 - 300 kg N per ha and year respectively would have to be applied at 3-cut regimes; with required efficiencies of 12 and 10 kg DM/kg N at 4-cut regimes the appropriate figures ranged from 320 to 420 kg N/ha and year, at 5- and 6-cut regimes and efficiencies of 10 and 8 kg DM/kg N results of 360 - 460 kg N and 380 - 500 kg N respectively were obtained. 5. At the relatively dry location Piber the highest dressing rates were needed in order to obtain the efficiencies from 8 to 16 kg DM/kg N, about 30 - 60 kg N/ha/year more than at the relatively moist location Admont.ist location Admont.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.594-603
• /
• 2012

This study aimed to investigate a bias pattern making method with geometrical approach. The bias-cut dress has soft silhouette of drape in the garment. However, the bias cut dress has problem of satisfying the intended garment size spec. This problem occurs from various sources. The main reason is that the bias-cut fabric tends to stretch on longitudinal direction and to shrink horizontal direction when it was hung on the body. The goal of this study was to develop a bias-cut dress pattern making method satisfying the intended garment size spec. The researchers developed the geometrical method of measuring dimensional change by calculating the compensation ratio of the fabric in true bias direction. The compensation ratio was calculated by applying draping ratio of the fabric. Three types of fabrics were used in the experiment. The warp and weft crossing angle of fabric was ranged from $78^{\circ}$ to $82^{\circ}$. The fabrics stretched longitudinally 6.9~9.9% and shrank horizontally 7.2~11.0%. The compensation ratio of the bias-cut pattern for sample dress was calculated for each fabric type. Two types of experimental bias-cut dress patterns were developed for each fabric. One pattern was made with applying full compensation ratio and the other one made with applying partial ratio of the fabric. Experimental dresses were made with these patterns. The results of the evaluation showed that the bias-cut dress pattern applying the partial compensation ratio was more appropriate than the pattern applying the full compensation ratio.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.151-157
• /
• 2011

This research was aimed to extend the vase life and improve the quality of cut roses 'Marina'. This study investigated the effect of three different angles and sucrose concentration on the vase life and the quality of cut rose flowers. In first experiment, cut roses were placed in three different angles ($0^{\circ}$, $45^{\circ}$ and $90^{\circ}$) in holding solutions containing 0.5, 1 and 2% sucrose (soaking treatment), and examined the number of petals of cut roses. In second experiment, cut roses were placed in three different angles after pre-treated in 0, 1, 2 and 4% sucrose solution for 2 and 20 hours, and examined the flower diameter of cut roses. In third experiment, cut roses were examined the pigmentation, flowing response and chlorophyll contents in cut roses by three different angles after pulsing treatment (pre-treatment) in holding solution containing 2% sucrose for 2 and 20 hours. Results of this study showed that cut roses were influenced by arranging angles and sucrose concentrations. The vase life of cut roses were extended in $45^{\circ}$ and $90^{\circ}$ arranging angle, as compared with the control (distilled water), and the holding solution containing 2% sucrose significantly increased vase life of cut roses(P < 0.05). Flower diameter of cut roses pre-treated in 4% sucrose solution for 2 and 20 hours significantly decreased (P < 0.05). The pigmentation and flowing response in cut roses were beneficial in $45^{\circ}$ arranging angle treated with 2% sucrose solution for 2 and 20 hours. Chlorophyll content in leaves of cut roses was not influenced by arranging angles. The pigmentation and flowing response of $0^{\circ}$ and $45^{\circ}$ arranging angles were better than that of 90 arranging angle. The vase life of cut roses in $45^{\circ}$ arranging angle was more prolonged than that in $90^{\circ}$ arranging angle. In conclusion, the arranging angles seem to be effective in retarding senescence of cut rose flowers.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.64-73
• /
• 1999

This study was conducted to find out the effects of hydroseeding material and seed mixture on the revegetation of rock cut-slopes by PEC4 (Polymer-Ecology-Control) Hydroseeding Measures. PEC4 hydroseeding material was applied to four cut-slopes using hydroseeding measures from April to August, 1999, and the field survey was carried out by monthly. PEC4 material consisted of bark compost and organic soil amendments. This material has high content of organic matter and high level of water holding capacity. PEC4 hydroseeding material shows low level of soil hardness, so it gives to good condition for seed germinating and plant growing in early stage. PEC4 material attached at rock cut-slopes by two types of adhesive agent was not eroded by rainfall. The plant coverage and number of plant species were affected by mixing ratio of seeds and seeding timing. From the viewpoint of plant establishment, the optimal hydroseeding timing of mixed seeds for plant growth seems to be in May. Most of the plant seeds were germinated well and they covered rock cut-slopes so quickly and effectively. Plant importance value of Silene armeria and Platycodon grandiflorum. were higher than any other seeded-native species in the competition between native species and exotic species, so they have enough possibility to be used for slope revegetation works. Thus it leads to conclusion that the revegetation method used in this experiment was a very effective method for plant establishment on rock cut-slopes.

• Journal of Environmental Health Sciences
• /
• v.47 no.4
• /
• pp.320-329
• /
• 2021

Background: Smoking exposure may be objectively assessed through specific biomarkers. The most common biomarker for smoking is cotinine concentration in urine, and setting an optimal cut-off point can accurately classify smoking status. Such a cut-off point for Korean adolescents has never been studied. Objectives: The aim of this study was to determine a cut-off point for urinary cotinine concentration for the discrimination of smoking in adolescents. Methods: Participants were adolescents aged 13~18 years who participated in the third cycle of the Korean National Environmental Health Survey. We used urine samples to confirm the level of cotinine concentrations. Smoking status was determined by self-reported questionnaire. We identified the optimal cotinine cut-off point for discriminating smoking status using receiver operating characteristic curve analysis. Results: Of the 904 participants, 28 (3.1%) were smokers, among whom 20 (71.4%) were male. The median urinary cotinine concentrations in smokers was 218 ㎍/L (male: 215 ㎍/L, female: 303 ㎍/L), and that in non-smokers was 1.31 ㎍/L (male: 1.46 ㎍/L, female: 1.18 ㎍/L). We found significant differences in urinary cotinine concentration according to smoking status and sex (p<0.001). Urinary cotinine concentrations performed well for identifying smoking adolescents [area under the curve: 0.954 (male: 0.963, female: 0.908)]. The cut-off that optimally distinguished smokers from non-smokers was 39.85 ㎍/L (sensitivity: 89.3%, specificity: 97.4%). Male [39.85 ㎍/L (sensitivity: 90.0%, specificity: 94.9%)] had a different optimal cut-off point than female [26.26 ㎍/L (sensitivity: 87.5%, specificity: 99.6%)]. Conclusions: This study determined a cut-off point for urinary cotinine of 39.85 ㎍/L (male: 39.85 ㎍/L, female: 26.26 ㎍/L) to distinguish smokers from non-smokers in adolescents.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.383-389
• /
• 2015

Chitooligosaccharide (COS), as antioxidant, extensively applied to food and juice preservation. In the present study, influences of COS on vase life and ornamental value of cut roses were investigated. Results showed that vase life of cut roses treated by COS was longer 6.4 days than one of control and ornamental character of cut roses was improved effectively by COS. The increase of vase life and ornamental value were chiefly governed by that COS improved water absorption capacity of cut roses. Besides that, COS decreased the contents of superoxide anion and hydrogen peroxide and lowered the levels of malondialdehyde in turn during the senescence process of cut roses. That was because that COS not only enhanced activities of antioxidant enzymes glutathione reductase, but also improved reduced glutathione contents in petals of cut rose. Therefore, COS could be used in commercial preservatives to improve the longevity of cut roses.

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.424-430
• /
• 2001

Cut-off 전압 변화에 따른 충방전 특성을 알아보기 위하여 Mn을 다른 전이 금속이 Co와 Ni로 소량 치환시킨 Li(M $n_{1-{\delta}}$ $n_{\delta}$)$_2$ $O_4$(M=Ni, Co, $\delta$=0, 0.05, 0.1, 0.2)를 고상 반응법으로 80$0^{\circ}C$에서 48시간 동안 유지하여 합성하였다. 충방전의 cut-off 전압은 2.5~4.4V, 3.0~4.5V, 3.5~4.5V, 3.5V~4.7V의 네 가지 전압범위고 하였다. 충방전 실험결과, Li(M $n_{1-{\delta}}$ $n_{\delta}$)$_2$ $O_4$의 용량은 각각 Co와 Ni의 $\delta$=0.1에서 최대를 보였다. Co 치환 조성 재료와 순물질 모두에서 최대의 용량을 보인 cut-off 전압대는 3.5~4.5V 이었는데 이때의 Li(M $n_{0.9}$ $Co_{0.1}$)$_2$ $O_4$와 LiM $n_2$ $O_4$의 초기 충전용량과 초기 방전용량은 각각 118, 119mAh/g과 114, 104mAh/g 이었다. 또한 모든 cut-off 전압대에서 Li(M $n_{0.9}$ $Co_{0.1}$)$_2$ $O_4$는 순수한 LiM $n_2$ $O_4$보다 더 높은 용량과 우수한 싸이클 성능을 보였으며 그 결과는 밀착형 전지구성에서도 일치하였다.하였다.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.99-108
• /
• 1997

The aim of this experiment was to investigate the effect of applying times of cattle slurry on dry matter yield of Orchardgrass, when cattle slurry applied at rates of 30m3(average mineral nitrogen fertilizer equivalent to 120kg) per ㏊ in different dressing times, such as S1(1st and 2nd growth), S2(1st and 3rd growth), S3(1st and 4th growth), S4(2nd and 3rd growth), S5(2nd and 4th growth) and S6(application for 3rd and 4th growth). The results were as follows. 1. The average annual yields of dry matter were produced 6.36~7.42 ton per ㏊ in 1995~1997 when cattle slurry applied at rates of 30m3(average mineral nitrogen fertilizer equivalent to 120kg) per ㏊ in different dressing times, especially these tendency were shown higher annual dry matter in S4 plot9application for 2nd and 3rd growth). Those were higher 2.48~3.54 tons or 1.22~2.28 tons per ㏊ than the yields from non-fertilizing or phosphrous and potassium fertilizing. 2. Relative yields of annual dry matter in cattle slurry application plots were 164(S2 plot)~191(S4 plot)% in comparing with non-fertilizing plot. 3. Dry matter yields according to cutting frequency were highest at the 2nd cut(1.50 ton) and were in the order 3rd cut(0.95 ton)>4th cut(0.75 ton)>1st cut(0.69 ton/㏊). Also, those of cattle slurry application plot per ㏊ were in the order 2nd cut(2.02~2.73 tons)>3rd cut(1.56~2.08 tons)>4th cut(1.07~1.68 tons)>1st cut(1.11~1.45 tons/㏊). 4. Relative yields of annual dry matter in cattle slurry application plots were 164~219, 161~210, 143~212 and 135~182% at the 3rd, 1st, 4th and 2nd cut, respectively in comparing with non-fertilizing plot. 5. The efficiencies of nitrogen on dry matter yield(kg DM/kg N) were 18.1, 21.3 and 34.5kg DM/kg N when cattle slurry applied to Orchardgrass at rates of 30m3 (average mineral fertilizer equivalent to 120 kg) per ㏊ in 1993, 1994 and 1995, respectively, especially these tendency were shown higher efficiencies in S4 plot(application for 2nd 3rd growth). On the other hand, those of the same level fertilization of mineral nitrogen were 43.8, 19.2 and 13.4 kg DM/kg N in 1993, 1994 and 1995, respectively.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.189-190
• /
• 2017

For the concept design of the device, a tool was made to test the simulated fuel rods and cutting force and the cutting force was measured. When 2-CUT and 3-CUT modules were used, the maximum force in 2-CUT at 12.5 mm/s speed change was $197.5kg_f$ and the maximum force at 3-CUT was $363.2kg_f$. The change of force in 2-CUT rapidly increases from about 1 second, and you can see that there are increase and decrease of the force change from about 5 seconds to 18 seconds, and it was rapidly decreased and the cut was made. The force change in 3-CUT has higher force at about 5 seconds later than 2-CUT at the speed of 12.5 mm/s, and you can see that it has the same tendency afterwards. If you search for the force at adequate speed from this cutting force test, 2-CUT module requires less slitting force than 3-CUT module, and the cutting time for 250 mm at 12.5 mm/s was 21 seconds, which can cut 4 m fuel rod in 5 minutes. But, there are cases of not completely slitting with 2-CUT module, so it is necessary to supplement this in the future through experiments.