• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.485-492
• /
• 2004

비정질알루미나와 기공형성제를 물과 혼합하여 원통형으로 성형하고 수화, 건조 및 소성하여 직경 5mm의 ${\gamma}$알루미나 펠릿을 제조하였다. 이를 Fe$(NO_{3})_{3}$.$9H{2}O$ 용액과 $CH{3}COOH$ 혼합용액에 침척시키고 $200^{\circ}C$ 온도로 3시간 수열처리 하여 펠릿을 담지시킨 후 건조와 소성공정을 통하여 촉매를 제조하였다. 이와 같이 수열법에 의해 제조딘 산화철 담지${\gamma}$알루미나 촉매를 환경촉매로 적용하기 위해 4-chlorophenol과 같은 난분해성물질을 촉매를 사용하지 않는 오존단독공정과 촉매를 사용하는 촉매오존(catalytic ozonation)공정으로 구분하여 OH 라티칼 전환반응 개시제로서의 기능과 그 분해특성을 비교하였다.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.195-200
• /
• 2020

In this study, a biocatalyst composite was prepared by immobilizing oxidoreductases onto Cu-activated zeolite to facilitate biochemical decomposition of 4-chlorophenol (4-CP). 4-CP monooxygenase (CphC-I) was cloned from a 4-CP degrading bacterium, Pseudarthrobacter chlorophenolicus A6, and then overexpressed and purified. Type X zeolite was synthesized from non-magnetic coal fly ash using acetic acid treatment, and its surfaces were coated with copper ions via impregnation (Cu-zeolite). Then, the recombinant oxidative and reductive enzymes were immobilized onto Cu-zeolite. The enzymes were effectively immobilized onto the Cu-zeolite (79% of immobilization yield). The retained catalytic activity of CphC-I after immobilization was 0.3423 U/g-Cu-zeolite, which was 63.3% of the value of free enzymes. The results of this study suggest that copper can be used as an effective enzyme immobilization binder because it provides favorable metalhistidine binding between the enzyme and Cu-zeolite.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.47-55
• /
• 2014

Arthrobacter chlorophenolicus A6 possesses several monooxygenases (CphC-I, CphC-II, and CphB) that can catalyze the transformation of 4-chlorophenol (4-CP) to hydroxylated intermediates in the initial steps of substrate metabolism. The corresponding genes of the monooxygenases were cloned, and the competent cells were transformed with these recombinant plasmids. Although CphC-II and CphB were expressed as insoluble forms, CphC-I was successfully expressed as a soluble form and isolated by purification. The specific activity of the purified CphC-I was analyzed by using 4-CP, 4-chlorocatechol (4-CC), and catechol (CAT) as substrates. The specific activities for 4-CP, 4-CC, and CAT were determined to be 0.312 U/mg, 0.462 U/mg, 0.246 U/mg, respectively. The results of this study indicated that CphC-I is able to catalyze the degradation of 4-CC and CAT in addition to 4-CP, which is a primary substrate. This research is expected to provide the fundamental information for the development of an eco-friendly biochemical degradation of aromatic hydrocarbons.

• 대한환경공학회지
• /
• 제27권3호
• /
• pp.273-279
• /
• 2005

본 연구에서는 초임계수 중에서 o-chlorophenol(o-CP)의 분해 및 중간 생성물 형성에 미치는 NaOH의 효과를 검토하였다. NaOH를 첨가하지 않은 경우 o-CP의 분해율은 20% 이하로 낮았으나 NaOH를 o-CP의 몰 농도에 대하여 200% 이상 첨가한 경우 체류 시간 1초 이내에 100% 가까운 분해율을 얻을 수 있었다. 분해 과정에서 생성되는 PAHs 및 페놀 화합물의 양도 크게 감소하는 경향을 나타내어 NaOH 첨가가 부산물 생성 억제에도 효과가 있는 것으로 나타났다. NaOH를 첨가하지 않은 경우와 첨가한 경우 공통적으로 페놀, 크레졸, 염화 페놀류, PAHs 및 1-indanone, dibenzofuran, dibenzo-dioxin, p,p'-dihydroxybiphenyl 등과 같이 2개 이상의 벤젠 고리가 산소로 연결된 화합물이 검출되었다. 반면에 NaOH를 첨가한 경우에는 2-ethylphenol, o-hydroxyacetophenone, hydroquinone, 4-allylphenol, 3-phenoxyphenol 및 4,4'-oxybisphenol이 생성되어 NaOH 첨가로 인한 o-CP의 분해는 훨씬 더 복잡한 과정을 통해서 이루어지는 것으로 판단되었다. 또한 페놀의 소각 과정에서 생성되는 것으로 보고된 화합물인 dibenzofuran, dibenzo-p-dioxin 등도 본 연구에서도 생성된 것으로부터 소각과 초임계수에 의한 열분해 사이에는 상관성이 있는 것으로 판단되었다.

• 상하수도학회지
• /
• 제12권1호
• /
• pp.88-95
• /
• 1998

The Electron/Hole Pair is generated when the Activation Energy produces by Ultraviolet Ray illumination to the Semiconductor. And $OH^-$ ion produces by Water Photo-Cleavage reacts with Positive Hole. As a result, OH Radical acting as strong oxidant is generated and then Photocatalytic Oxidation Reaction occurs. The Photocatalytic Oxidation can oxidize the chlorophenol to Chloride and Carbon Dioxide easier, safer and shorter than conventional Water Treatment Process With the same degree of chlorination, the $Cl^-$ ion at para (C4) position is most easily replaced by the OH radical. And then, the blocking effect of $OH^-$ ion between the $Cl^-$ ions and $Cl^-$ ions at symmetrical location is easily replaced by the OH radical. For mono-, di-, tri-chlorophenols, there is no obvious difference in decomposition rate, decomposition efficiency and completeness of the decomposition reaction except for 2,3-dichloropheno, 2,4,5-, 2,3,4-trichlorophenol. The decomposition efficiency is higher than 75% and completeness of the decomposition reaction is higher than 70%. Therefore, continuous flow photocatalytic reactor is promising process to remove the chlorinated aromatic compounds which is more toxic than non-chlorinated aromatic compound.

• 대한화학회지
• /
• 제27권2호
• /
• pp.142-149
• /
• 1983

아세토니트릴용액중의 티안트렌 양이온 라디칼 과염소산 염(1)은 Cumene hydroperoxide(4), p-chlorocumene hydroperoxide(2), p-nitrocumene hydroperoxide(3)와 상온에서 반응한다. 이 반응의 공통 생성물로서 티안트렌을 얻었으며 4로 부터 5-(4'-hydroxyphenyl) thianthrenium perchlorate (5), 2로부터 5-(5'-chloro-2'-hydroxyphenyl) thianthrenium perchlorate (7)와 5-acetonylthianthrenium perchlorate (6), 그리고 3으로부터 6만을 얻었다. 이 반응의 양관계는 1의 2몰이 티안트렌 1몰과 티안트렌이움 염(또는 염들) 1몰을 생성한다. 1에 대한 친핵성 활성도는 페놀 > > p-클로로페놀 ${\sim}$아세톤 > > p-니트로페놀 순서임이 밝혀졌다. Hydroperoxide의 산촉매 불균일 분해반응외에도 소량의 균일분해 반응생성물이 3과 4로부터 생성됨을 알았다.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.266-272
• /
• 2005

Transition metal ions($Ni^{2+}$, $Cr^{3+}$ and $V^{5+}$) doped $TiO_2$ nanostructured powders were synthesized by mechanical alloying(MA) to shift the adsorption threshold into the visible light region. The synthesized powders were characterized by XRD, SEM, TEM and BET for structural analysis, UV-Vis and photoluminescence spectrum for the optical study. Also, photocatalytic abilities were evaluated by decomposition of 4-chlorophenol(4CP) under ultraviolet and visible light irradiations. Optical studies showed that the absorption wavelength of transition metal ions doped $TiO_2$ powders moved to visible light range, which was believed to be induced by the energy level change due to the doping. Among the prepared $TiO_2$ powders, $NiO^{2+}$ doped $TiO_2$ powders, showed excellent photooxidative ability in 4CP decomposition.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.641-649
• /
• 2002

The redox properties of a homogeneously-precipitated $TiO_2$ rutile powder with a BET surface area of ~$200 m^2$/g, consisting of an acicular primary particle, were characterized using photocatalytic reaction in aqueous 4-chlorophenol, Cu-EDTA and Pb-EDTA solutions under ultraviolet irradiation, compared to those of commercial P-25 X$200 m_2$ powder with a spherical primary particle as well as home-made anatase $TiO_2$ powder with ~$200 m^2$/g BET surface area. Here, the anatase powder also includes mainly the primary particles very similar to the acicular shapes of the rutile $TiO_2$ powder. The rutile powder showed the fastest decomposition rate and the largest amount in the photoredor, compared with the anatase or P-25 powder, while the anatase powder unexpectedly showed the slowest rate and the smallest amount in the same experiments regardless of almost the same surface area. From results, the excellent photoredox abilities of this rutile powder appears to be due to specific powder preparation method, like a homogeneous precipitation leading to direct crystallization from the solution, regardless of their crystalline structures even when having the similar particle shape and surface area.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• 공업화학
• /
• 제32권4호
• /
• pp.409-416
• /
• 2021

불용성 산화 전극은 전기화학적 수처리 공정에 있어 가장 핵심적인 소재이며, 이를 이용하여 난분해성 유기물질을 분해하는 방법으로 많은 연구가 진행되어 왔다. 이러한 불용성 산화 전극 제조에 있어 금속 기판 표면에 코팅하는 금속 촉매의 종류, 코팅 방식, 소결 방법 등의 다양한 제조 변수가 불용성 산화 전극의 성능 및 내구성에 영향을 미친다. 본 연구에서는 Ir-Ru-Ta 삼원 금속 코팅을 활용하여 동일한 전 처리 및 소결 조건에서 코팅 방법에 따라 불용성 산화 전극을 제조하고 이의 성능과 내구성을 연구하였다. 코팅 방식은 브러쉬 및 스프레이 코팅법을 활용하였으며, 그 결과 최적화된 스프레이 코팅 조건에서 동일한 촉매 잉크양으로 더 많은 금속을 Ti 기판 표면에 코팅이 가능하여 촉매 잉크 저감이 가능한 것을 확인하였다. 또한, 전극 표면의 갈라짐 현상 및 삼원 금속의 균일한 도포에 의해 스프레이 코팅법으로 제조한 Spray_2.0_3.0 전극이 가장 높은 전기화학적 활성 비표면적을 보여주었으며, 4-chlorophenol의 분해 성능이 타 전극에 비해 우수한 것으로 나타났다. 하지만, 불용성 산화전극의 내구성은 전극의 코팅방법에 따라 큰 차이가 없는 것으로 나타났다.