• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1656-1661
• /
• 2012

UV inspection technology is being used for predictive maintenance of power facility together with IR-thermography and ultrasonic devices. In this paper, the UV corona camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. The UV corona camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The transmission between 250 to 280nm was 11% ($12.5%{\times}88%{\times}98%$) by combing the transmission on absorption film, window and other filter(UG 5, nickel sulphate and so on). In a distance of 5m with the UV corona camera it is possible to detect partial discharge with a PD level of 2.5pC and a RIV level of $3.6dB{\mu}V$.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.278-285
• /
• 2005

This paper describes techniques of camera calibration and artificial landmarks detection for the automatic charging of a mobile robot, equipped with a fish-eye camera in the direction of its operation for movement or surveillance purposes. For its identification from the surrounding environments, three landmarks employed with infrared LEDs, were installed at the charging station. When the robot reaches a certain point, a signal is sent to the LEDs for activation, which allows the robot to easily detect the landmarks using its vision camera. To eliminate the effects of the outside light interference during the process, a difference image was generated by comparing the two images taken when the LEDs are on and off respectively. A fish-eye lens was used for the vision camera of the robot but the wide-angle lens resulted in a significant image distortion. The radial lens distortion was corrected after linear perspective projection transformation based on the pin-hole model. In the experiment, the designed system showed sensing accuracy of ${\pm}10$ mm in position and ${\pm}1^{\circ}$ in orientation at the distance of 550 mm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.4
• /
• pp.476-481
• /
• 2008

The necessity of intelligent surveillance system is gradually considered seriously from the space where the security is important. From this paper will load Network Camera in Mobile Robot based on embedded Linux and Goal is in the system embodiment will be able to track the intruder. From Network Camera uses Wireless Lan transmits an image with server, grasps direction of the intruder used Block Matching algorithms from server, transmits direction information and tracks an intruder. The robot tracks the intruder according to gets the effective image of an intruder. In compliance with this paper the system which is embodied is linked with a different surveillance system and as intelligent surveillance system there is a possibility of becoming worse a reliability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.4 s.27
• /
• pp.13-19
• /
• 2003

This paper Non-metric digital video camera against subject of study, stone cultural heritages such as stone pagodas. Non-metric digital video camera can perform functions that metric or quasi-metric camera cm not. Thus we could easily acquire still-images which are for analyzing from moving picture part. When we analyze a location of cultural heritages using a Non-metric digital video camera, we could get a accuracy from 2mm to 4mm. Finally, it can be said that study also suggests the efficient measurement when planning to restore prototype of cultural heritages in the future and providing specific three-dimensional information on them.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.169-175
• /
• 2005

In recent, implementation of the embedded system is gradually in the spotlight of world-wide by information technology(IT) engineers. By this time, an implementation of real time system is limited on image acquisition and processing system in practical. In this paper, the USB camera interface system based on the embedded linux OS is implemented using USB 2.0 camera with low cost. This system can obtain image signals into the memory via X-hyper255B processor from USB camera. It is need to initialize USB camera by the Video4Linux for the kernel device driver. From the system image capturing and image processing can be performed. It is confirmed that the image data can be transformed to packet of Network File System(NFS) and connected to the internetwork, then the data can be monitored from the client computer connected to the internetwork.

• Smart Media Journal
• /
• v.13 no.5
• /
• pp.62-71
• /
• 2024

This study conducted a team-based CPR simulation with 32 fourth-year emergency rescue students to determine the effectiveness of training feedback using body cameras used at emergency rescue sites, and measured awareness, training feedback effectiveness, and satisfactio+n before and after body camera feedback. , preferences and difficulties in using body camera devices were identified. Data analysis was performed using SPSS 27.0 program, including descriptive statistics, frequency analysis, paried t-test, and Wilcoxon signed rank test. As a result of the study, the perception of body camera use showed a positive change from 3.73±0.62 points to 4.45±0.54 points, and a positive satisfaction level of 3.98±0.51 was shown (p<.001). Additionally, there was a significant increase in self-check accuracy and performance score after body camera feedback (p<.001). Therefore, during team-based simulation resuscitation training, positive feedback effects in improving self-inspection ability and performance can be achieved by watching body camera videos and using self-checklists without direct feedback from the instructor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1121-1125
• /
• 2003

In this paper we deal with visual servoing that can control a robot arm with a camera using information of images only, without estimating 3D position and rotation of the robot arm. Here it is assumed that the robot arm is calibrated and the camera is uncalibrated. We use a pinhole camera model as the camera one. The essential notion can be show, that is, epipolar geometry, epipole, epipolar equation, and epipolar constrain. These play an important role in designing visual servoing. For easy understanding of the proposed method we first show a design in case of the calibrated camera. The design is constructed by 4 steps and the directional motion of the robot arm is fixed only to a constant direction. This means that an estimated epipole denotes the direction, to which the robot arm translates in 3D space, on the image plane.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2087-2093
• /
• 2006

In this paper, auto focus actuator, which is used to move a lens module in the mobile phone having a camera module, is developed. Camera module containing auto focus actuator requires to minimize total size because of characteristics of the application area such as mobile phone, digital camera, and personal digital assistant. There are stepping motor, voice coil motor, and piezoelectric motor as auto focus actuator. In this paper, voice coil motor having new electromagnetic configuration is proposed. And actuator using proposed voice coil motor is developed by optimal design method using magnetic circuit analysis. The sectional area of the developed actuator is reduced to 32.4% compared with actuator using general electromagnetic configuration. From the performance test, the developed actuator has moving stroke of 0.64 mm for 2.1 volt, hysteresis of 40 $\mu$m, full stroke current of 54 mA, and unit step motion of 3 $\mu$m.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.41.4-41
• /
• 2002

In this paper we deal with visual servoing that can control a robot arm with a camera using information of images only, without estimating 3D position and rotation of the robot arm. Here it is assumed that the robot arm is calibrated and the camera is uncalibrated. Here we consider two coordinate systems, the world coordinate system and the camera coordinate one and we use a pinhole camera model as the camera one. First of all, the essential notion can be show, that is, epipolar geometry, epipole, epipolar equation, and epipolar constrain. And these plays an important role in designing visual servoing in the later chapters. Statement of the problem is giver. Provided two a priori...

• Journal of Korea Multimedia Society
• /
• v.21 no.9
• /
• pp.1052-1061
• /
• 2018

In this paper, we propose a new algorithm that is robust against the effects of objects that are relatively unaffected by camera motion and can accurately detect camera motion even in high resolution images. First, for more accurate camera motion detection, a global motion filter based on entropy of a motion vector is used to distinguish the background and the object. A block matching algorithm is used to find exact motion vectors. In addition, a matched filter with the angle of the ideal motion vector of each block is used. Motion vectors including 4 kinds of diagonal direction, zoom in, and zoom out are added additionally. The experiment shows that the precision, recall, and accuracy of camera motion detection compared to the recent results is improved by 12.5%, 8.6% and 9.5%, respectively.